Thread: wiring methods

I'm switching my check list and report template around to comply with ASHI SOP.

In the electrical section they require that I describe the wiring methods.

What are the common wiring methods that I should add to the pick list in my brain?

NAHI or The State of Maryland did not have this in their SOP.

Similar Threads:

• Transformer & Low Volt Wiring in Main Panel
• From the old board, Abandon Wiring
• Pool Light Wiring
• Protection of wiring in the attic
• From the old board, Knob and Tube Wiring

Nevermind, I found the description further down in the ASHI SOP.

Wiring Methods:

Identification of electrical conductors or wires by their general type, such as "non-metallic sheathed cable" ("Romex"), "armored cable" ("bx") or "knob and tube," etc.

Originally Posted by John Dirks Jr

.....................What are the common wiring methods that I should add to the pick list in my brain?.................

• Knob & Tubing
• Cloth-covered varnished cable (typically reduced equipment grounding conductor)
• Non-metallic Cable
• Metallic Cable
• Conduit
• Tubing
• Other methods having Articles in Chapter 3 of the NEC
•