Results 1 to 6 of 6
  1. #1
    mathew stouffer's Avatar
    mathew stouffer Guest

    Default Messy electrical

    Do you include this in your reporting. Also is Romex permitted to be run along supply ducts.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    OREP Insurance

  2. #2
    mike huntzinger's Avatar
    mike huntzinger Guest

    Default Re: Messy electrical

    can you explain when this is located, i can see the plumbing can be damaged and should be behind sheetrock so should any romex wires


  3. #3
    Join Date
    Mar 2007
    Location
    Las Vegas, NV
    Posts
    222

    Default Re: Messy electrical

    Quote Originally Posted by mathew stouffer View Post
    Do you include this in your reporting.
    Absolutely. Electrical wiring unsupported and subject to abrasion and damage, PARTICULARLY where it contacts the edge of the metal duct, creates fire and shock hazard.


    Quote Originally Posted by mathew stouffer View Post
    Also is Romex permitted to be run along supply ducts.
    Yes, as long as it is not secured to them.

    Beacon Inspection Services
    Proudly Serving the Greater Henderson and Las Vegas Valley Area in Southern Nevada!
    Like Beacon On Facebook

  4. #4
    mathew stouffer's Avatar
    mathew stouffer Guest

    Default Re: Messy electrical

    This is in the mechanical room, house was built in 02.


  5. #5
    dana1028's Avatar
    dana1028 Guest

    Default Re: Messy electrical

    Quote Originally Posted by Bob Knauff View Post
    Yes, as long as it is not secured to them.
    Would you be kind enough to support that statement with a code section?


  6. #6
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Messy electrical

    Quote Originally Posted by Bob Knauff View Post
    Yes, as long as it is not secured to them.
    Quote Originally Posted by dana1028 View Post
    Would you be kind enough to support that statement with a code section?

    Dana,

    Which part?

    You mean screwing the NM cable straps to metal duct or flex duct?

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •