Results 1 to 4 of 4
Thread: Breaker
-
04-15-2010, 03:26 PM #1
Member
- Join Date
- Dec 2007
- Location
- Holladay, UT
- Posts
- 577
Breaker
Should I be concerned about the white substance at this breaker, what causes it? It is a 60 amp breaker feeding a panel next to it (less than a foot away).
Similar Threads:
-
04-15-2010, 04:19 PM #2
Member
- Join Date
- Mar 2007
- Location
- georgia
- Posts
- 112
Re: Breaker
That appears to the filler (sometimes ceramic) that is installed over the adjustment screws at the factory.
-
04-15-2010, 04:46 PM #3
Member
- Join Date
- Aug 2007
- Location
- Memphis TN.
- Posts
- 4,311
Re: Breaker
.
Originally Posted by paul hardy
.
Or Sanchem NOOXID electrical grease & electrically conductive grease dielectric grease and contact lubricants
.
.
It Might have Choked Artie But it ain't gone'a choke Stymie! Our Gang " The Pooch " (1932)
Billy J. Stephens HI Service Memphis TN.
-
04-15-2010, 05:10 PM #4
Member
- Join Date
- Dec 2007
- Location
- Chico,Ca
- Posts
- 454
Re: Breaker
Seems to be a common occurance of Gould/ITE, ITE Siemens breakers in a damp location. I would not get too worked up about it.
Tom Rees / A Closer Look Home Inspection / Salt Lake City, Utah
Reply With Quote
Bookmarks