Results 1 to 3 of 3

Thread: Fuse Block

  1. #1
    Join Date
    Mar 2007
    Location
    New Mexico
    Posts
    1,258

    Default Fuse Block

    If the service disco is a pull out fuse block, the rules for a down stream panel are still the same as if it were a disconnect breaker, correct? I'm referring to the separation of the neutrals and grounds as well as the floating neutral.

    Similar Threads:
    2018 ASHI InspectionWorld
    Jim Robinson
    New Mexico, USA

  2. #2
    Join Date
    Dec 2007
    Location
    Chico,Ca
    Posts
    423

    Default Re: Fuse Block

    Quote Originally Posted by Jim Robinson View Post
    If the service disco is a pull out fuse block, the rules for a down stream panel are still the same as if it were a disconnect breaker, correct? I'm referring to the separation of the neutrals and grounds as well as the floating neutral.

    Why would it change just because it was a fusible pullout VS a circuit breaker? In answer to your question they would be the same.


  3. #3
    Join Date
    Mar 2007
    Location
    New Mexico
    Posts
    1,258

    Default Re: Fuse Block

    That was the way I was seeing it. I just wanted to make sure before I called it out.

    Jim Robinson
    New Mexico, USA

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •