Results 1 to 3 of 3
  1. 08-20-2007, 10:20 PM #1
    Joe Nernberg's Avatar
    Joe Nernberg Guest

    Cool Arcing Condition

    What do you suppose the cause of this arcing and damage is from? The dead-front cover was clean. There were no obvious modifications.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Inspection Referral
    Reply With Quote Reply With Quote
  2. 08-21-2007, 04:55 AM #2
    Jerry Peck's Avatar
    Jerry Peck
    Jerry Peck is offline Member
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Arcing Condition

    Looks like someone hit it with a neutral or other phase wire.

    That's not good. (But you knew that.)

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com
    Reply With Quote Reply With Quote
  3. 08-21-2007, 12:55 PM #3
    Don Matthews's Avatar
    Don Matthews Guest

    Default Re: Arcing Condition

    I'll bet it got their attention (and probably left a little brown stain in their drawers as well!)

    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules