Results 1 to 5 of 5

Thread: Split Bus Bar

  1. #1
    mathew stouffer's Avatar
    mathew stouffer Guest

    Default Split Bus Bar

    Did ITE produce a split bus bar panel?

    Similar Threads:
    Inspection Referral SOC

  2. #2
    mathew stouffer's Avatar
    mathew stouffer Guest

    Default Re: Split Bus Bar

    Attached is a picture

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images

  3. #3
    Join Date
    Mar 2007
    Location
    Plano, Texas
    Posts
    4,170

    Default Re: Split Bus Bar

    I don't know if they did or not but that does not appear to be a split bus panel. Notice the power goes through the mains before the buss bars.

    Jim Luttrall
    www.MrInspector.net
    Plano, Texas

  4. #4
    Join Date
    Mar 2007
    Location
    Ormond Beach, Florida
    Posts
    26,248

    Default Re: Split Bus Bar

    That's not a split bus panel, the service entrance feeds the top terminals to which the main breaker is connected, the breaker is between the main terminals and the bus bars below, meaning that the main breaker will (should) remove power to the bus bars below.

    Jerry Peck, Construction / Litigation Consultant
    Construction Litigation Consultants, LLC ( www.ConstructionLitigationConsultants.com )
    www.AskCodeMan.com

  5. #5
    mathew stouffer's Avatar
    mathew stouffer Guest

    Default Re: Split Bus Bar

    Thanks. Don't see man of those around here


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •