Results 1 to 7 of 7
Thread: Cutler Hammer Panel
-
10-02-2014, 03:59 PM #1
Member
- Join Date
- Sep 2011
- Location
- Bolingbrook, IL
- Posts
- 30
Cutler Hammer Panel
Hello all
This is a Cutler Hammer Panel. I'm assuming that these breakers are made for 2 wires.
100A service
Thanks
Last edited by Donald Hobson; 10-02-2014 at 04:20 PM.
-
10-02-2014, 04:28 PM #2
Member
- Join Date
- Mar 2007
- Location
- Atlanta, Georgia
- Posts
- 1,088
Re: Cutler Hammer Panel
Then your assumption would be wrong.
"The Code is not a peak to reach but a foundation to build from."
-
10-02-2014, 04:30 PM #3
Member
- Join Date
- Aug 2008
- Location
- Maryland
- Posts
- 1,970
Re: Cutler Hammer Panel
Some CH Classic are listed for use with two conductors.
All answers based on unamended National Electrical codes.
-
10-02-2014, 04:39 PM #4
Member
- Join Date
- Sep 2011
- Location
- Bolingbrook, IL
- Posts
- 30
Re: Cutler Hammer Panel
Can you elaborate
Originally Posted by Bruce Ramsey
- - - Updated - - -
These were listed as Class CTL OH 120 volt 1 pole unit Originally Posted by Jim Port
Last edited by Donald Hobson; 10-02-2014 at 05:15 PM.
-
10-02-2014, 04:53 PM #5
Member
- Join Date
- Sep 2011
- Location
- Bolingbrook, IL
- Posts
- 30
Re: Cutler Hammer Panel
Hello
Anything definitive would help
Thanks
-
10-02-2014, 06:58 PM #6
Member
- Join Date
- Mar 2012
- Location
- Lansdale, PA
- Posts
- 876
Re: Cutler Hammer Panel
I believe the Cutler Hammer breakers listed for two wires have a screw head to hold the wires and small protrusions on each side of the screw to keep the wires from slipping out to the side.
-
10-04-2014, 07:39 PM #7
Member
- Join Date
- Aug 2008
- Location
- Maryland
- Posts
- 1,970
Re: Cutler Hammer Panel
They are new enough that you can check by going to a big box and looking at the labels on the side of the breakers.
All answers based on unamended National Electrical codes.
Reply With Quote
Bookmarks