Results 1 to 11 of 11
  1. #1
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default GFCI table page revised for clarity

    I have revised my GFCI table page for clarity and easier reading: http://jerrypeck.com/IFCN/Other%20It..._page-2014.pdf
    (You may have to refresh your page to see the new one if your browser caches pages for you.)

    Similar Threads:
    OREP Insurance
    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  2. #2
    Join Date
    Apr 2011
    Location
    Bozeman, Montana
    Posts
    94

    Default Re: GFCI table page revised for clarity

    Thank you Mr. Peck


  3. #3
    Join Date
    Mar 2007
    Location
    New Mexico
    Posts
    1,352

    Default Re: GFCI table page revised for clarity

    Thanks. I was just looking for my print out a few days ago, and it was all worn out from riding in my clip board. Perfect time to update it.

    Jim Robinson
    New Mexico, USA

  4. #4
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: GFCI table page revised for clarity

    Thank you Jerry!

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  5. #5
    Join Date
    Mar 2007
    Location
    NoCal
    Posts
    261

    Default Re: GFCI table page revised for clarity

    Thanks Jerry
    Good to have current info


  6. #6
    Join Date
    Mar 2007
    Location
    Santa Rosa, CA
    Posts
    3,154

    Default Re: GFCI table page revised for clarity

    Thanks Jerry,

    Once again, you are the winner of the coveted chocolate cornflake!

    Department of Redundancy Department
    Supreme Emperor of Hyperbole
    http://www.FullCircleInspect.com/

  7. #7

    Default Re: GFCI table page revised for clarity

    Jerry - thank you for putting this document together and posting it. I've been using your 2002 version for quite some time now.

    Scott Patterson directed me over here to get this document.


  8. #8
    Join Date
    Mar 2008
    Location
    Charlotte NC
    Posts
    2,304

    Default Re: GFCI table page revised for clarity

    Thanks Jerry.

    The beatings will continue until morale has improved. mgt.

  9. #9
    Join Date
    Aug 2011
    Location
    Bennett (Denver metro), Colorado
    Posts
    1,461

    Default Re: GFCI table page revised for clarity

    Ditto,

    Thanks

    If you choose not to decide, you still have made a choice.

  10. #10
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: GFCI table page revised for clarity

    Quote Originally Posted by Gunnar Alquist View Post
    Thanks Jerry,

    Once again, you are the winner of the coveted chocolate cornflake!
    O ... M ... G!

    The chocolate cornflake arrived ... it was HUGE! The entire neighborhood was invited to share the chocolate cornflake, delicious!



    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  11. #11
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: GFCI table page revised for clarity

    Quote Originally Posted by Reuben Saltzman View Post
    Jerry - thank you for putting this document together and posting it. I've been using your 2002 version for quite some time now.

    Scott Patterson directed me over here to get this document.
    Reuben, you need to spread the word to the folks over on FB about this site. It is so much easier to navigate than FB and it holds a wealth of knowledge that can be searched.

    Glad to help you find the form you were looking for….

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •