Results 1 to 11 of 11

Thread: panel location

  1. #1
    Jerome W. Young's Avatar
    Jerome W. Young Guest

    Default panel location

    besides the obvious clearances what else is wrong with this as it pertains to exhaust flues etc?
    Thanks!

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Member Benefits1

  2. #2
    Join Date
    Mar 2007
    Location
    Philadelphia PA
    Posts
    3,177

    Default Re: panel location

    B-vent "connected" to draft hood without proper adapter. Is this the same water heater with staining at the burner area?


  3. #3
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: panel location

    Quote Originally Posted by Jerome W. Young View Post
    besides the obvious clearances what else is wrong with this as it pertains to exhaust flues etc?
    Thanks!
    Jerome,

    You mean like:

    - No Type B gas vent is allowed to be within 36" in front of the panel.
    - No water pipe is allowed to be within 36" in front of the panel.
    - No water heater is allowed to be within 36" in front of the panel.

    But those are 'not allowed' because they encroach into the required 36" in-front-of-the-panel working space ... so it gets back to "the obvious clearances" you mentioned.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  4. #4
    Join Date
    Mar 2007
    Location
    Healdsburg, CA
    Posts
    1,741

    Talking Re: panel location

    Jerry P
    Wadda you mean clearance? It looks like it was the intention of the plumber to provide wireless bonding for the water heater's supply piping by putting it as close as possible to the electrical distribution panel? Don’t you agree that’s brilliant !

    Jerry McCarthy
    Building Code/ Construction Consultant

  5. #5
    Join Date
    Mar 2007
    Location
    Santa Rosa, CA
    Posts
    3,154

    Default Re: panel location

    Quote Originally Posted by John Arnold View Post
    B-vent "connected" to draft hood without proper adapter. Is this the same water heater with staining at the burner area?


    John,

    According to the Simpson Dura-Vent website, an adapter is not required by the flue pipe manufacturer. However, it might be required by the water heater manufacturer.

    Simpson Dura-vent (#12)
    Simpson Dura-vent (#17)


    Department of Redundancy Department
    Supreme Emperor of Hyperbole
    http://www.FullCircleInspect.com/

  6. #6
    Jerome W. Young's Avatar
    Jerome W. Young Guest

    Default Re: panel location

    Yes this is that same water heater


  7. #7
    Lee Nettnin's Avatar
    Lee Nettnin Guest

    Default Re: panel location

    Too much wire sheathing inside the panel box.
    And Isn't that romex wire coming out of the BX cable on the bottom of the box?


  8. #8
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: panel location

    Quote Originally Posted by Jerry McCarthy View Post
    wireless bonding for the water heater's supply piping by putting it as close as possible to the electrical distribution panel? Don’t you agree that’s brilliant !
    Dang!

    I shoulda thunk o' dat!

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  9. #9
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: panel location

    Quote Originally Posted by Lee Nettnin View Post
    Too much wire sheathing inside the panel box.
    How much is too much?

    How much is required?

    And Isn't that romex wire coming out of the BX cable on the bottom of the box?
    That is flexible metal conduit, and, yes, it looks like NM cable is coming out of it - what's wrong with that? Same thing at the top left.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  10. #10
    Join Date
    Mar 2007
    Location
    Fuquay Varina, NC
    Posts
    1,074

    Default Re: panel location

    Besides the sloppy panel the NM cable is not protected on the walls.

    But your question was (what else is wrong with the flue as to the picture) so I don't know if you are looking for help on other things wrong or trying to stump us on something that is wrong?

    Mike Schulz License 393
    Affordable Home Inspections
    www.houseinspections.com

  11. #11
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: panel location

    Quote Originally Posted by Mike Schulz View Post
    But your question was (what else is wrong with the flue as to the picture)
    I think Jerome was asking about the vent in relation to the electrical panel, not necessarily the vent itself - such as if there was a requirement which did not allow the vent to be within some distance of a panel, and, to my knowledge, it could right next to it (but I would have a problem with that as it could overheat the panel and and insulation touching the panel enclosure).

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •