Results 1 to 3 of 3
  1. #1
    Bob Lynett's Avatar
    Bob Lynett Guest

    Default Flaking paint inside eletrical panel

    Never saw this before, but I am thinking it is due to moisture from the concrete wall. Also, how do many of you rate Federal Pacific stab-loc panels?
    I appreciate any feedback. Thanks!

    Similar Threads:
    Last edited by Bob Lynett; 02-19-2008 at 05:09 PM. Reason: Add a picture
    Certified Master Inspector CMI

  2. #2
    Join Date
    Mar 2007
    Location
    Philadelphia PA
    Posts
    3,177

    Default Re: Flaking paint inside eletrical panel

    I don't see any photo with the flaking paint.
    Most of us rate Stab Loks as dangerous junk that should be replaced asap.


  3. #3
    Join Date
    Aug 2007
    Location
    Memphis TN.
    Posts
    4,311

    Default Re: Flaking paint inside eletrical panel

    Quote Originally Posted by Bob Lynett View Post
    --- how do many of you rate Federal Pacific stab-loc panels?

    Quote Originally Posted by John Arnold View Post
    Most of us rate Stab Loks as dangerous junk that should be replaced asap.
    May I add?

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    It Might have Choked Artie But it ain't gone'a choke Stymie! Our Gang " The Pooch " (1932)
    Billy J. Stephens HI Service Memphis TN.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •