Results 1 to 4 of 4
Thread: multiple taps at main
-
05-13-2008, 06:26 PM #1
Jerome W. Young Guest
multiple taps at main
this looks like it was made for two feeders but not three?
Similar Threads:
-
05-13-2008, 06:38 PM #2
Member
- Join Date
- Mar 2007
- Location
- Fletcher, NC
- Posts
- 28,042
Re: multiple taps at main
Made for parallel conductor sets, and, you are correct, one side of each is multiple tapped (and it does not look like it is made for that).
If ... that big *IF* ... if you could have removed those conductors and that lug, you would have been able to see on the lug what it was rated for. It might also state in the wiring diagram or on the label.
-
05-13-2008, 08:31 PM #3
Member
- Join Date
- Oct 2003
- Location
- Rockwall Texas
- Posts
- 4,521
Re: multiple taps at main
How about this one, Jerry?
-
05-14-2008, 01:02 PM #4
Member
- Join Date
- Mar 2007
- Location
- Fletcher, NC
- Posts
- 28,042
Re: multiple taps at main
Rick,
Originally Posted by Rick Hurst
That's commonly referred to as a 'AFU' type connection, typically done by WTFDIK 'electricians'.
Reply With Quote
Bookmarks