Results 1 to 4 of 4
  1. #1
    Jerome W. Young's Avatar
    Jerome W. Young Guest

    Default multiple taps at main

    this looks like it was made for two feeders but not three?

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Crawl Space Creeper

  2. #2
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: multiple taps at main

    Made for parallel conductor sets, and, you are correct, one side of each is multiple tapped (and it does not look like it is made for that).

    If ... that big *IF* ... if you could have removed those conductors and that lug, you would have been able to see on the lug what it was rated for. It might also state in the wiring diagram or on the label.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  3. #3
    Join Date
    Oct 2003
    Location
    Rockwall Texas
    Posts
    4,521

    Default Re: multiple taps at main

    How about this one, Jerry?

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images

  4. #4
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,032

    Default Re: multiple taps at main

    Quote Originally Posted by Rick Hurst View Post
    How about this one
    Rick,

    That's commonly referred to as a 'AFU' type connection, typically done by WTFDIK 'electricians'.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •