Results 1 to 4 of 4
  1. 05-02-2007, 01:55 PM #1
    Jeff Eastman's Avatar
    Jeff Eastman Guest

    Default Clearances for Panel

    ..................

    Similar Threads:
    Last edited by Jeff Eastman; 12-19-2007 at 03:55 PM.
    Crawl Space Creeper
    Reply With Quote Reply With Quote
  2. 05-02-2007, 02:13 PM #2
    Jerry Peck's Avatar
    Jerry Peck
    Jerry Peck is offline Member
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Clearances for Panel

    Huh?

    You mean like in a hallway? Where could be opposite each other?

    Or do you mean for the side of a window on the same wall? There are no requirements for that.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com
    Reply With Quote Reply With Quote
  3. 05-02-2007, 02:26 PM #3
    Jerry Peck's Avatar
    Jerry Peck
    Jerry Peck is offline Member
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Clearances for Panel

    No problems there. Not for the panel being there.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com
    Reply With Quote Reply With Quote
  4. 05-02-2007, 02:53 PM #4
    Jerry Peck's Avatar
    Jerry Peck
    Jerry Peck is offline Member
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Clearances for Panel

    Quote Originally Posted by Jeff Eastman View Post
    thanks , Jerry....now if it was an SEC - - OUCH!
    If it were the overhead service drop, very much a problem.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules