Results 1 to 1 of 1
Thread: Homebuilt electric...again...
07-07-2008, 04:08 PM #1
Homeowner switched out the 220 breaker, adding the 110 breaker and a nice block of wood to fill the gap left behind. I thought it was for an electric to gas stove replacement, but the electric range was still installed and siliconed to the countertop. So I didn't have access behind it. Now I'm wondering where the aluminum wire runs to, probably a 110 volt outlet somewhere. Leaving it to a capable sparkie to figure out, but I thought the wood block was a nice feature.