1. Announcement:
    InspectionNews Message Board Rules, Policies, and Disclaimers
    Brian Hannigan (Administrator)
    04-16-2007
    Views:
    1,511,965

Forum: Electrical Systems: Home Inspection and Commercial Inspection

Service Conductors, Panels, Overcurrent Protection Devices, Wiring Types and Methods, Switches, Receptacles, Light Fixtures ... For Home Inspections & Commercial Inspections

  1. Determining the amperage mat a main disconnect fuse block

    Started by Scott Bray, 08-01-2013 10:02 AM
    5 Pages •
    1 2 3 4 5
    12 Attachment(s)
    • Replies: 265
    • Views: 39,537
    Jim Port
    09-11-2013, 07:10 PM Go to last post

  2. Too much for 200A

    Started by Matt Fellman, 03-26-2008 10:38 PM
    3 Pages •
    1 2 3
    11 Attachment(s)
    • Replies: 188
    • Views: 31,171
    James Duffin
    04-15-2008, 07:14 PM Go to last post

  3. Electrical Boxes & Switches for finished basement

    Started by shatan, 12-22-2008 07:59 PM
    3 Pages •
    1 2 3
    24 Attachment(s)
    • Replies: 156
    • Views: 31,346
    Jim Zborowski
    01-14-2009, 06:40 AM Go to last post

  4. Bunching Romex

    Started by Lawrence Thomas, 11-04-2011 05:22 PM
    2 Pages •
    1 2
    7 Attachment(s)
    • Replies: 128
    • Views: 45,745
    Roland Miller
    10-10-2013, 05:59 PM Go to last post

  5. Frequently seen electrical defect....

    Started by Joseph Farsetta, 09-28-2009 07:20 PM
    2 Pages •
    1 2
    2 Attachment(s)
    • Replies: 121
    • Views: 22,668
    Fred Warner
    10-22-2009, 09:51 AM Go to last post

  6. Would you change this panel?

    Started by John Kogel, 07-24-2009 09:59 PM
    2 Pages •
    1 2
    7 Attachment(s)
    • Replies: 119
    • Views: 18,809
    Robert Dalga
    07-27-2009, 04:50 PM Go to last post

  7. Condo 50 Amp Main

    Started by David Banks, 04-12-2008 11:37 AM
    2 Pages •
    1 2
    3 Attachment(s)
    • Replies: 115
    • Views: 25,449
    Russel Ray
    04-23-2008, 09:06 PM Go to last post

  8. Door blocks Light Switch

    Started by Bruce Ramsey, 03-15-2010 06:31 PM
    2 Pages •
    1 2
    2 Attachment(s)
    • Replies: 112
    • Views: 38,809
    bob smit
    03-30-2010, 10:04 AM Go to last post

  9. Frankenstein's electrical panel?

    Started by Welmoed Sisson, 08-20-2012 04:53 PM
    2 Pages •
    1 2
    17 Attachment(s)
    • Replies: 112
    • Views: 22,681
    Robert Rolleston
    01-08-2014, 11:13 AM Go to last post

  10. ISLAND OUTLET NON GFCI

    Started by CHARLIE VAN FLEET, 11-25-2011 07:08 PM
    2 Pages •
    1 2
    3 Attachment(s)
    • Replies: 111
    • Views: 21,781
    Roger Frazee
    12-07-2011, 12:28 AM Go to last post

  11. Single Strand Copper as Service Cable

    Started by Nick Ostrowski, 11-14-2010 05:33 AM
    2 Pages •
    1 2
    6 Attachment(s)
    • Replies: 111
    • Views: 20,418
    brian schmitt
    12-10-2010, 09:30 AM Go to last post

  12. GFI Wiring Question

    Started by Nick Ostrowski, 05-29-2011 09:05 AM
    2 Pages •
    1 2
    2 Attachment(s)
    • Replies: 109
    • Views: 26,492
    Norman Ellis
    07-07-2011, 07:52 AM Go to last post

  13. Romex running under joist

    Started by mathew stouffer, 03-13-2009 08:01 AM
    2 Pages •
    1 2
    6 Attachment(s)
    • Replies: 104
    • Views: 50,227
    H.G. Watson, Sr.
    04-06-2009, 11:18 PM Go to last post

  14. Water Heater BX Quiz

    Started by John Kogel, 02-03-2010 10:26 PM
    2 Pages •
    1 2
    18 Attachment(s)
    • Replies: 96
    • Views: 25,137
    Roger Frazee
    02-11-2010, 10:17 PM Go to last post

  15. Sub panel question

    Started by Bill Anglin, 03-25-2011 11:05 AM
    2 Pages •
    1 2
    3 Attachment(s)
    • Replies: 93
    • Views: 23,449
    Guy W Opie
    04-12-2011, 01:46 PM Go to last post

  16. Anyone know about the reliabiltiy of these mini-breakers that replaced fuses?

    Started by ren ramsey, 03-25-2014 05:14 PM
    2 Pages •
    1 2
    7 Attachment(s)
    • Replies: 92
    • Views: 22,810
    Raymond Wand
    04-23-2014, 02:14 PM Go to last post

  17. Home inspections & Code Inspections

    Started by Roland Miller, 01-27-2009 11:17 AM
    2 Pages •
    1 2
    1 Attachment(s)
    • Replies: 90
    • Views: 17,076
    RANDY NICHOLAS
    02-01-2009, 01:58 PM Go to last post

  18. Service Panel Location

    Started by Dylan Whitehead, 02-12-2009 03:23 PM
    2 Pages •
    1 2
    7 Attachment(s)
    • Replies: 90
    • Views: 17,549
    Markus Keller
    02-23-2009, 08:27 AM Go to last post

  19. wire size

    Started by daniel nantell, 11-22-2009 03:16 PM
    2 Pages •
    1 2
    • Replies: 90
    • Views: 18,516
    bob smit
    01-22-2010, 07:59 PM Go to last post

  20. electricial tape wrap around wire nuts

    Started by Robert Mattison, 08-02-2009 09:55 AM
    2 Pages •
    1 2
    6 Attachment(s)
    • Replies: 89
    • Views: 50,613
    William A. Grant
    12-24-2012, 05:56 PM Go to last post

  21. 12-2 with ground for multi wire

    Started by Benjamin Thompson, 09-23-2011 06:25 PM
    2 Pages •
    1 2
    4 Attachment(s)
    • Replies: 86
    • Views: 17,167
    Derek Guridi
    10-11-2011, 04:21 AM Go to last post

  22. Electricians Terminology

    Started by Nick Ostrowski, 02-03-2014 05:41 PM
    2 Pages •
    1 2
    1 Attachment(s)
    • Replies: 85
    • Views: 14,094
    Robert Mattison
    04-24-2014, 05:34 AM Go to last post

  23. FPE Panels News Story

    Started by Billy Stephens, 04-27-2014 10:49 AM
    2 Pages •
    1 2
    10 Attachment(s)
    • Replies: 84
    • Views: 12,632
    Garry Sorrells
    05-14-2014, 06:15 AM Go to last post

  24. Romex through sheetrock?

    Started by Robert Autrey, 05-11-2009 01:37 PM
    2 Pages •
    1 2
    1 Attachment(s)
    • Replies: 77
    • Views: 43,157
    Robert Mattison
    05-17-2009, 05:08 PM Go to last post

  25. Panel bonding which is correct?

    Started by Paul Johnston, 07-12-2009 06:50 AM
    2 Pages •
    1 2
    7 Attachment(s)
    • Replies: 77
    • Views: 15,030
    Philip Ngai
    08-24-2009, 11:13 AM Go to last post

  26. Dedicated 20A Kitchen circuit

    Started by Stuart Brooks, 10-08-2011 11:31 AM
    2 Pages •
    1 2
    • Replies: 76
    • Views: 19,482
    Stuart Brooks
    10-14-2011, 07:00 AM Go to last post

  27. Panel in bathroom?

    Started by Tom Rees, 07-08-2010 02:34 PM
    2 Pages •
    1 2
    • Replies: 73
    • Views: 29,236
    Phil Houck
    04-23-2011, 02:38 PM Go to last post

  28. Splices in panels

    Started by Jody Humbert, 01-30-2009 07:18 AM
    2 Pages •
    1 2
    6 Attachment(s)
    • Replies: 72
    • Views: 14,767
    Michael Greenwalt
    03-06-2009, 03:01 PM Go to last post

  29. any electrical code prevent GFI outlet wired to GFI breaker

    Started by Charlie Crouthamel, 02-23-2015 10:23 AM
    2 Pages •
    1 2
    • Replies: 72
    • Views: 11,650
    Len Inkster
    03-18-2015, 04:43 AM Go to last post

  30. Wash your hands

    Started by mathew stouffer, 08-13-2010 08:30 AM
    2 Pages •
    1 2
    1 Attachment(s)
    • Replies: 71
    • Views: 13,201
    bob smit
    08-24-2010, 11:15 AM Go to last post

  31. funky SEC splice

    Started by Kristi Silber, 07-15-2012 11:28 AM
    2 Pages •
    1 2
    5 Attachment(s)
    • Replies: 71
    • Views: 14,504
    bob smit
    08-18-2012, 04:06 PM Go to last post

  32. Panel contamination pictures?

    Started by ren ramsey, 03-20-2014 05:54 AM
    2 Pages •
    1 2
    6 Attachment(s)
    • Replies: 69
    • Views: 13,720
    Jerry Peck
    03-27-2014, 05:10 AM Go to last post

  33. Attic splice Snap connector

    Started by Eric Delio, 10-06-2014 02:39 PM
    2 Pages •
    1 2
    2 Attachment(s)
    • Replies: 69
    • Views: 14,050
    Mike Pagozalski
    10-18-2014, 04:03 PM Go to last post

  34. Drywall/paint over spray inside panel

    Started by mathew stouffer, 03-19-2011 09:25 AM
    2 Pages •
    1 2
    7 Attachment(s)
    • Replies: 68
    • Views: 26,470
    Rollie Meyers
    07-09-2012, 05:15 PM Go to last post

  35. Question Pushmatic Panels

    Started by Jody Humbert, 07-09-2009 08:00 AM
    2 Pages •
    1 2
    3 Attachment(s)
    • Replies: 67
    • Views: 65,028
    bob smit
    11-10-2009, 02:10 PM Go to last post

  36. Panel concealed within cabinet

    Started by Ken Amelin, 06-07-2014 04:53 AM
    2 Pages •
    1 2
    7 Attachment(s)
    • Replies: 67
    • Views: 11,332
    Billy Stephens
    06-15-2014, 10:33 AM Go to last post

  37. 12/2 with ground and 12/2 wiring

    Started by Lynn Petrie, 01-09-2008 09:52 AM
    2 Pages •
    1 2
    6 Attachment(s)
    • Replies: 66
    • Views: 19,865
    William Mize
    01-15-2008, 10:24 AM Go to last post

  38. AC breaker installation

    Started by mathew stouffer, 08-14-2008 04:40 PM
    2 Pages •
    1 2
    6 Attachment(s)
    • Replies: 66
    • Views: 10,347
    Mike Schulz
    08-25-2008, 02:44 PM Go to last post

  39. Copper and AL Service Cable In Same Panel

    Started by Nick Ostrowski, 12-11-2009 08:52 PM
    2 Pages •
    1 2
    2 Attachment(s)
    • Replies: 65
    • Views: 13,116
    Jim Port
    12-20-2009, 04:15 PM Go to last post

  40. Here's something I came across on a panel replacement.

    Started by Marc M, 11-01-2008 08:13 AM
    8 Attachment(s)
    • Replies: 63
    • Views: 12,343
    Jerry Peck
    12-05-2008, 12:53 PM Go to last post

  41. "Hot" wall switch

    Started by Mike Hunger, 06-24-2009 05:15 PM
    7 Attachment(s)
    • Replies: 63
    • Views: 12,644
    Ron Bibler
    07-27-2009, 07:46 PM Go to last post

  42. #12 AWG for Neutral at Service

    Started by Mark Brown, 11-07-2011 10:55 AM
    4 Attachment(s)
    • Replies: 63
    • Views: 8,616
    Rich Goeken
    11-18-2011, 08:41 AM Go to last post

  43. Adding 36KW generator to one of two 200A panels

    Started by Peter Clausen, 09-03-2015 06:04 AM
    1 Attachment(s)
    • Replies: 63
    • Views: 21,812
    DanS26
    10-14-2015, 05:46 PM Go to last post

  44. Romex cable

    Started by mathew stouffer, 08-19-2008 06:22 PM
    7 Attachment(s)
    • Replies: 62
    • Views: 17,320
    Robert Rolleston
    04-09-2012, 01:20 PM Go to last post

  45. Receptacles over electrical baseboard heaters

    Started by Bob Hunt, 06-19-2009 06:44 PM
    5 Attachment(s)
    • Replies: 62
    • Views: 27,867
    Joe Tedesco
    09-25-2009, 07:13 PM Go to last post

  46. Unhappy GFCI on a Gas range

    Started by Anthony Alderman, 01-13-2010 04:06 PM
    • Replies: 62
    • Views: 40,706
    bob smit
    01-21-2010, 06:49 PM Go to last post

  47. Home Owner Double Tap Problems

    Started by John Thompson, 07-29-2010 02:41 PM
    2 Attachment(s)
    • Replies: 62
    • Views: 26,071
    Matt Fellman
    02-14-2012, 11:34 PM Go to last post

  48. Handle Ties

    Started by Richard Robinson, 09-11-2015 07:01 AM
    2 Attachment(s)
    • Replies: 62
    • Views: 19,124
    Jerry Peck
    09-20-2015, 11:00 AM Go to last post

  49. Kentucky Home Inspectors and FPE panels

    Started by Scott Patterson, 12-04-2007 03:42 PM
    14 Attachment(s)
    • Replies: 61
    • Views: 18,113
    BARRY ADAIR
    03-02-2017, 11:07 AM Go to last post

  50. Upside down receptacles

    Started by JIM MURPHY, 08-25-2016 03:05 PM
    complaining, customer, house, receptacles, upside 1 Attachment(s)
    • Replies: 61
    • Views: 16,501
    Bill Kriegh
    10-09-2016, 05:24 PM Go to last post

  51. Thumbs up AFCI Breakers or NOT

    Started by Al Roden, 01-24-2008 05:14 PM
    • Replies: 60
    • Views: 23,692
    Jerry Peck
    05-14-2008, 01:09 PM Go to last post

  52. GFCI on 2 wire system

    Started by Mike Vanoni, 03-20-2009 09:32 AM
    1 Attachment(s)
    • Replies: 60
    • Views: 19,138
    Rod Smith
    04-15-2011, 07:41 AM Go to last post

  53. Jerry! Why didn't you tell me not to wiggle these

    Started by mathew stouffer, 09-22-2009 07:44 PM
    3 Attachment(s)
    • Replies: 60
    • Views: 9,152
    Jerry Peck
    10-02-2009, 03:59 PM Go to last post

  54. splicing copper wire to aluminum

    Started by Robert Mattison, 09-03-2009 10:49 AM
    3 Attachment(s)
    • Replies: 60
    • Views: 35,654
    Mike Schulz
    09-16-2009, 09:50 AM Go to last post

  55. SEC replacement needed?

    Started by John Arnold, 12-21-2012 05:23 AM
    1 Attachment(s)
    • Replies: 60
    • Views: 10,574
    Jerry Peck
    01-28-2013, 05:15 PM Go to last post

  56. Do you call 90 degree bends in panel?

    Started by Ross Neag, 03-27-2008 08:41 PM
    2 Attachment(s)
    • Replies: 59
    • Views: 15,168
    Brandon Chew
    04-05-2008, 07:59 AM Go to last post

  57. sub panel

    Started by Russell Melville, 05-21-2012 01:54 PM
    1 Attachment(s)
    • Replies: 59
    • Views: 12,639
    bob smit
    06-08-2012, 06:21 AM Go to last post

  58. Boat cable for branch wiring

    Started by Ken Amelin, 08-27-2012 06:33 PM
    2 Attachment(s)
    • Replies: 59
    • Views: 9,613
    Billy Stephens
    09-04-2012, 01:39 PM Go to last post

  59. More than one GFI on the same circuit

    Started by Frank Bombardiere, 04-30-2010 05:55 PM
    3 Attachment(s)
    • Replies: 58
    • Views: 71,854
    Mbrooke
    10-22-2013, 07:29 AM Go to last post

  60. 4/0 or 2/0 Aluminium Cable

    Started by mathew stouffer, 02-09-2011 08:44 AM
    7 Attachment(s)
    • Replies: 58
    • Views: 17,984
    H.G. Watson, Sr.
    02-16-2011, 12:52 AM Go to last post

  61. Question about service change

    Started by Chris DiMarco, 12-31-2011 04:03 PM
    • Replies: 57
    • Views: 7,595
    Garry Sorrells
    01-06-2012, 04:13 AM Go to last post

  62. Electrician said "I see nothing wrong"

    Started by Bob Sisson, 10-07-2012 05:27 PM
    3 Attachment(s)
    • Replies: 57
    • Views: 9,491
    Lon Henderson
    11-15-2012, 06:56 AM Go to last post

  63. 20 receptacle connection

    Started by Ken Amelin, 01-17-2009 12:54 PM
    1 Attachment(s)
    • Replies: 56
    • Views: 12,534
    Jim Port
    07-23-2016, 06:18 PM Go to last post

  64. Double tap and breaker question

    Started by Marc M, 07-28-2009 05:07 PM
    6 Attachment(s)
    • Replies: 56
    • Views: 20,333
    Gunnar Alquist
    01-15-2010, 07:38 PM Go to last post

  65. Electrical subpanel clearance

    Started by Malcolm Martin, 01-26-2010 01:50 PM
    1 Attachment(s)
    • Replies: 56
    • Views: 23,700
    Lou Romano
    05-21-2010, 07:46 AM Go to last post

  66. Holmes on Homes

    Started by John Steinke, 07-02-2010 04:12 AM
    • Replies: 56
    • Views: 13,112
    John Kogel
    07-07-2010, 07:27 AM Go to last post

  67. Outlet just outside it's life

    Started by Jack Feldmann, 05-08-2007 05:23 PM
    4 Attachment(s)
    • Replies: 55
    • Views: 11,230
    Thom Walker
    05-18-2007, 07:37 PM Go to last post

  68. Horizontally Installed Service Panel

    Started by David Tontarski, 12-16-2009 07:22 AM
    • Replies: 55
    • Views: 18,395
    H.G. Watson, Sr.
    12-22-2009, 12:51 PM Go to last post

  69. Wire nuts inside panel

    Started by Stephen Clausen, 07-01-2010 10:42 AM
    1 Attachment(s)
    • Replies: 55
    • Views: 63,424
    Gabe S
    07-06-2010, 07:31 PM Go to last post

  70. electric dryer: old; gas dryer: new

    Started by greyhound1, 08-10-2010 08:18 PM
    • Replies: 55
    • Views: 10,772
    Roger Frazee
    08-16-2010, 07:10 AM Go to last post

  71. Main ground only to Water line??

    Started by chris vis, 06-11-2012 04:10 PM
    8 Attachment(s)
    • Replies: 55
    • Views: 9,952
    bob smit
    07-10-2012, 05:18 PM Go to last post

  72. Input please

    Started by Bill Anglin, 03-16-2012 11:48 PM
    • Replies: 53
    • Views: 18,622
    Ian Page
    03-31-2012, 02:13 PM Go to last post

  73. Unhappy Electrician said the Double Lugged Neutrals are Okay per panel directions?

    Started by Mike Gault, 01-28-2014 05:25 PM
    4 Attachment(s)
    • Replies: 53
    • Views: 9,531
    Jerry Peck
    04-09-2014, 05:32 PM Go to last post

  74. Switches and Outlets on flat surfaces

    Started by Bruce Ramsey, 07-13-2010 05:07 PM
    4 Attachment(s)
    • Replies: 52
    • Views: 11,021
    bob smit
    08-24-2010, 11:34 AM Go to last post

  75. Soldered Romex

    Started by Ken Rowe, 10-18-2013 09:59 PM
    8 Attachment(s)
    • Replies: 52
    • Views: 14,777
    Jerry Peck
    11-07-2013, 06:38 PM Go to last post

Thread Display Options

Use this control to limit the display of threads to those newer than the specified time frame.

Allows you to choose the data by which the thread list will be sorted.

Order threads in...

Note: when sorting by date, 'descending order' will show the newest results first.

Icon Legend

Contains unread posts
Contains unread posts
Contains no unread posts
Contains no unread posts
More than 25 replies or 10000 views
Hot thread with unread posts
More than 25 replies or 10000 views
Hot thread with no unread posts
Closed Thread
Thread is closed
Thread Contains a Message Written By You
You have posted in this thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules