1. Announcement:
    InspectionNews Message Board Rules, Policies, and Disclaimers
    Brian Hannigan (Administrator)
    04-16-2007
    Views:
    2,018,738

Forum: Electrical Systems: Home Inspection and Commercial Inspection

Service Conductors, Panels, Overcurrent Protection Devices, Wiring Types and Methods, Switches, Receptacles, Light Fixtures ... For Home Inspections & Commercial Inspections

  1. Faucet to Electrical outlet (GFI)

    Started by Frank Albanello, 01-24-2011 06:41 AM
    2 Attachment(s)
    • Replies: 17
    • Views: 60,130
    Frank Albanello
    01-30-2011, 05:55 AM Go to last post

  2. Barrel Crimps

    Started by Richard Thacker, 01-21-2011 10:46 AM
    1 Attachment(s)
    • Replies: 2
    • Views: 6,609
    John Steinke
    01-24-2011, 05:17 AM Go to last post

  3. wire size

    Started by william siegel, 01-20-2011 03:32 PM
    2 Attachment(s)
    • Replies: 8
    • Views: 8,643
    H.G. Watson, Sr.
    01-21-2011, 08:11 AM Go to last post

  4. Older ITE Main Panel

    Started by Patrick Knight, 01-20-2011 10:09 PM
    1 Attachment(s)
    • Replies: 1
    • Views: 5,749
    H.G. Watson, Sr.
    01-20-2011, 10:42 PM Go to last post

  5. Cool Theater lighting

    Started by Thomas Tadd, 01-17-2011 08:42 AM
    • Replies: 5
    • Views: 5,235
    Ted Menelly
    01-18-2011, 08:33 PM Go to last post

  6. Service entrance conductors, mismatched size at rthe mast head.

    Started by David D. Whitt, 01-16-2011 02:56 PM
    3 Attachment(s)
    • Replies: 15
    • Views: 15,922
    David D. Whitt
    01-17-2011, 05:40 PM Go to last post

  7. The 2011 NEC

    Started by Michael Thomas, 01-16-2011 04:29 AM
    • Replies: 3
    • Views: 6,415
    Speedy Petey
    01-17-2011, 04:24 PM Go to last post

  8. Service cable in conduit

    Started by Fred Klein, 01-14-2011 09:04 AM
    • Replies: 2
    • Views: 6,919
    H.G. Watson, Sr.
    01-14-2011, 03:19 PM Go to last post

  9. Wiring in spray foam insulation

    Started by Darrel Hood, 10-25-2009 10:32 AM
    • Replies: 11
    • Views: 19,820
    Joseph Ehrhardt
    01-14-2011, 05:52 AM Go to last post

  10. leviton gfci code update

    Started by CHARLIE VAN FLEET, 01-12-2011 05:34 PM
    • Replies: 3
    • Views: 6,645
    Nolan Kienitz
    01-13-2011, 11:01 AM Go to last post

  11. High voltage power lines

    Started by Ron Bishop, 01-06-2011 06:46 PM
    1 Attachment(s)
    • Replies: 26
    • Views: 20,338
    Jerry Peck
    01-11-2011, 04:34 PM Go to last post

  12. Warm switch

    Started by Ernie Simpson, 01-05-2011 09:13 AM
    • Replies: 6
    • Views: 6,547
    Speedy Petey
    01-10-2011, 02:59 PM Go to last post

  13. Electrical thread at a DIY forum.

    Started by Rollie Meyers, 12-20-2010 11:09 PM
    • Replies: 12
    • Views: 9,428
    Speedy Petey
    01-10-2011, 02:35 PM Go to last post

  14. Neutral CCC

    Started by Marc M, 01-06-2011 08:48 PM
    2 Attachment(s)
    • Replies: 10
    • Views: 9,358
    H.G. Watson, Sr.
    01-09-2011, 11:11 AM Go to last post

  15. Bonding Question

    Started by Robert Foster, 01-08-2011 08:34 AM
    • Replies: 5
    • Views: 6,025
    Corn Walker
    01-09-2011, 06:21 AM Go to last post

  16. Missing ground?

    Started by sidney alstad, 01-07-2011 03:33 PM
    3 Attachment(s)
    • Replies: 3
    • Views: 5,770
    Jerry Peck
    01-08-2011, 07:04 AM Go to last post

  17. Should AFCI breakers be installed on circuits that have GFCI's ?

    Started by Gene South, 11-22-2010 05:24 PM
    • Replies: 19
    • Views: 54,061
    Jerry Peck
    01-07-2011, 06:50 PM Go to last post

  18. cat 5 cable

    Started by Jerome W. Young, 04-20-2008 06:12 AM
    • Replies: 7
    • Views: 7,537
    That Guy
    01-07-2011, 10:56 AM Go to last post

  19. Defects at service panel & distribution panel?

    Started by Joseph Peake, 01-04-2011 11:07 AM
    5 Attachment(s)
    • Replies: 5
    • Views: 9,586
    John Kogel
    01-04-2011, 07:53 PM Go to last post

  20. How much is to much?

    Started by Ed Martino, 12-31-2010 03:58 PM
    • Replies: 23
    • Views: 10,768
    H.G. Watson, Sr.
    01-04-2011, 08:41 AM Go to last post

  21. Would you consider this a problem by definition

    Started by Gene South, 12-15-2010 08:15 PM
    • Replies: 24
    • Views: 8,672
    Garrett Tan
    12-22-2010, 05:19 PM Go to last post

  22. Never have seen this before

    Started by Jim Adams, 12-22-2010 12:08 PM
    2 Attachment(s)
    • Replies: 0
    • Views: 4,065
    Jim Adams
    12-22-2010, 12:08 PM Go to last post

  23. Amalgamated Electric Corp Panel: Breakers?

    Started by Shawn Willy, 06-18-2009 12:31 PM
    6 Attachment(s)
    • Replies: 14
    • Views: 45,553
    Shawn Willy
    12-21-2010, 11:18 AM Go to last post

  24. Bonding under the kitchen sink

    Started by Luc V. L., 12-20-2010 03:34 PM
    1 Attachment(s)
    • Replies: 2
    • Views: 4,883
    Jerry Peck
    12-20-2010, 03:44 PM Go to last post

  25. Energysaver 1800

    Started by Matt Fellman, 12-10-2010 08:13 PM
    • Replies: 12
    • Views: 8,845
    Matt Fellman
    12-18-2010, 10:14 PM Go to last post

  26. Open Neutral

    Started by Sam Morris, 12-17-2010 05:15 PM
    1 Attachment(s)
    • Replies: 5
    • Views: 11,399
    H.G. Watson, Sr.
    12-18-2010, 08:45 AM Go to last post

  27. Outlet Required?

    Started by Matt Fellman, 12-08-2010 03:57 PM
    3 Attachment(s)
    • Replies: 29
    • Views: 11,332
    H.G. Watson, Sr.
    12-17-2010, 05:01 PM Go to last post

  28. Oxidized conductors

    Started by Marc M, 12-15-2010 04:12 PM
    2 Attachment(s)
    • Replies: 15
    • Views: 6,145
    bob smit
    12-17-2010, 03:57 PM Go to last post

  29. Electrical test tools made in china

    Started by LEO304E CARR, 12-15-2010 04:23 PM
    • Replies: 2
    • Views: 4,932
    John Steinke
    12-17-2010, 04:44 AM Go to last post

  30. Alum ground on branch ckt

    Started by Matt Fellman, 12-16-2010 12:32 AM
    3 Attachment(s)
    • Replies: 4
    • Views: 5,304
    Matt Fellman
    12-16-2010, 11:09 AM Go to last post

  31. Ungrounded 3 prong plugs

    Started by David OKeefe, 12-11-2010 10:15 PM
    • Replies: 40
    • Views: 20,946
    Rick Cantrell
    12-15-2010, 07:48 PM Go to last post

  32. junction boxes

    Started by tony voss, 12-15-2010 04:22 PM
    • Replies: 3
    • Views: 5,162
    Tony Cole
    12-15-2010, 07:27 PM Go to last post

  33. Quick question, no pic

    Started by Ross Neag, 12-10-2010 02:54 PM
    • Replies: 4
    • Views: 4,761
    H.G. Watson, Sr.
    12-10-2010, 05:01 PM Go to last post

  34. Single Strand Copper as Service Cable

    Started by Nick Ostrowski, 11-14-2010 05:33 AM
    2 Pages •
    1 2
    6 Attachment(s)
    • Replies: 111
    • Views: 30,820
    brian schmitt
    12-10-2010, 09:30 AM Go to last post

  35. Unusual ganged breaker with a hold screw through the center of it.

    Started by Don Burbach, 12-06-2010 09:53 AM
    2 Attachment(s)
    • Replies: 9
    • Views: 9,040
    Jim Port
    12-09-2010, 06:08 AM Go to last post

  36. Touch-Plate

    Started by Jeffrey L. Mathis, 12-07-2010 04:32 PM
    • Replies: 5
    • Views: 8,263
    Bob Elliott
    12-08-2010, 02:17 AM Go to last post

  37. Basic Portland OR code Q's

    Started by Josh Gourley, 12-04-2010 09:30 AM
    • Replies: 13
    • Views: 11,799
    H.G. Watson, Sr.
    12-05-2010, 04:02 PM Go to last post

  38. Two service panels

    Started by william siegel, 11-26-2010 07:47 PM
    7 Attachment(s)
    • Replies: 29
    • Views: 21,939
    Bill Kriegh
    12-02-2010, 08:50 PM Go to last post

  39. Device Identification?

    Started by Robert Foster, 12-01-2010 03:59 PM
    1 Attachment(s)
    • Replies: 5
    • Views: 5,182
    Rick Cantrell
    12-02-2010, 05:15 AM Go to last post

  40. Two conductors on CH type breakers

    Started by Roger Frazee, 12-01-2010 11:04 PM
    • Replies: 0
    • Views: 4,942
    Roger Frazee
    12-01-2010, 11:04 PM Go to last post

  41. same gauge req'd on sq D double tap?

    Started by Matt Fellman, 12-01-2010 12:22 AM
    • Replies: 20
    • Views: 11,701
    Corn Walker
    12-01-2010, 07:47 PM Go to last post

  42. Old, sealed main panel

    Started by Luc V. L., 11-23-2010 09:49 PM
    3 Attachment(s)
    • Replies: 14
    • Views: 6,208
    George Wells
    11-30-2010, 10:28 AM Go to last post

  43. No businees in the last month

    Started by Barney Cheeseman, 11-27-2010 08:14 AM
    • Replies: 6
    • Views: 5,952
    Rick Hurst
    11-27-2010, 10:38 PM Go to last post

  44. Question RE: FAU disconnect

    Started by Marc M, 11-23-2010 09:58 PM
    • Replies: 30
    • Views: 21,599
    Jerry Peck
    11-27-2010, 06:46 PM Go to last post

  45. Conductor corrosion and chinese drywall

    Started by Roger Frazee, 11-26-2010 09:43 AM
    • Replies: 9
    • Views: 7,129
    Roger Frazee
    11-26-2010, 10:13 PM Go to last post

  46. Interesting article about al conductors

    Started by Roger Frazee, 11-21-2010 02:14 PM
    • Replies: 2
    • Views: 4,419
    David Argabright
    11-25-2010, 12:17 PM Go to last post

  47. Dual feeds from breaker

    Started by Gary Bottomley, 11-22-2010 08:07 PM
    2 Attachment(s)
    • Replies: 19
    • Views: 15,076
    John Kogel
    11-25-2010, 10:01 AM Go to last post

  48. Double Tap At Main Lug

    Started by Sam Morris, 11-23-2010 07:19 PM
    2 Attachment(s)
    • Replies: 5
    • Views: 7,109
    John Arnold
    11-24-2010, 03:48 AM Go to last post

  49. Electrical upgrade

    Started by Eric Van De Ven, 11-23-2010 07:30 AM
    4 Attachment(s)
    • Replies: 2
    • Views: 4,809
    John Kogel
    11-23-2010, 07:43 PM Go to last post

  50. Would you write "Your electrical system is perfectly fine."

    Started by Benjamin Gromicko, 11-14-2010 01:36 PM
    1 Attachment(s)
    • Replies: 52
    • Views: 16,585
    Rolland Pruner
    11-23-2010, 05:11 PM Go to last post

  51. Question Number of downline outlets on GFCI

    Started by Ron Tipton, 11-20-2010 03:38 PM
    1 Attachment(s)
    • Replies: 35
    • Views: 44,317
    John Kogel
    11-22-2010, 07:26 PM Go to last post

  52. Sub panel feeder cables

    Started by Thomas Thayer, 11-22-2010 02:23 PM
    2 Attachment(s)
    • Replies: 8
    • Views: 7,474
    Rick Cantrell
    11-22-2010, 06:06 PM Go to last post

  53. Aluminum - antioxidant coating

    Started by Ken Amelin, 11-21-2010 08:58 AM
    • Replies: 1
    • Views: 11,698
    Roger Frazee
    11-21-2010, 12:02 PM Go to last post

  54. Flat bar for feed from meter to main panel

    Started by stanley frost, 11-19-2010 05:33 AM
    2 Attachment(s)
    • Replies: 16
    • Views: 7,576
    Roger Frazee
    11-20-2010, 10:38 PM Go to last post

  55. Rusted lug

    Started by David Garton, 11-13-2010 10:05 PM
    • Replies: 12
    • Views: 6,850
    Lloyd Miller
    11-19-2010, 09:23 PM Go to last post

  56. Splitting the pump load on a rental

    Started by Michael Merriman, 11-09-2010 08:19 PM
    3 Attachment(s)
    • Replies: 9
    • Views: 7,457
    Roger Frazee
    11-18-2010, 03:51 PM Go to last post

  57. GFCIs help

    Started by JIM MURPHY, 11-17-2010 05:24 AM
    • Replies: 29
    • Views: 13,029
    H.G. Watson, Sr.
    11-18-2010, 10:24 AM Go to last post

  58. Challenger circuit breker help

    Started by Robert Foster, 11-16-2010 10:09 AM
    2 Attachment(s)
    • Replies: 17
    • Views: 12,148
    Roger Frazee
    11-17-2010, 11:31 PM Go to last post

  59. 3 Cable Feeder

    Started by mathew stouffer, 11-10-2010 10:26 PM
    12 Attachment(s)
    • Replies: 41
    • Views: 11,006
    Roger Frazee
    11-16-2010, 08:30 PM Go to last post

  60. FPE Distribution Panels.

    Started by mathew stouffer, 11-13-2010 09:19 AM
    3 Attachment(s)
    • Replies: 4
    • Views: 6,872
    mathew stouffer
    11-15-2010, 06:53 PM Go to last post

  61. Remove the neutral bonding screw?

    Started by John Kogel, 11-08-2010 09:54 AM
    7 Attachment(s)
    • Replies: 18
    • Views: 14,042
    John Steinke
    11-14-2010, 09:09 AM Go to last post

  62. Too many wafer breakers in panel

    Started by mathew stouffer, 11-06-2010 08:35 AM
    8 Attachment(s)
    • Replies: 25
    • Views: 18,805
    bob smit
    11-11-2010, 09:48 AM Go to last post

  63. Question Low Voltage Wiring concerns

    Started by Mike Birenbaum, 11-10-2010 12:56 PM
    • Replies: 2
    • Views: 5,645
    Ricky Wells
    11-10-2010, 03:51 PM Go to last post

  64. Easy electrical question?? Branch circuits from living room to bathroom

    Started by kenny martin, 11-03-2010 05:27 AM
    • Replies: 22
    • Views: 17,572
    Roger Frazee
    11-09-2010, 07:09 PM Go to last post

  65. discolored bus bar

    Started by Chris Hart, 11-03-2010 04:51 PM
    2 Attachment(s)
    • Replies: 13
    • Views: 18,882
    Mike Clarke
    11-09-2010, 06:20 PM Go to last post

  66. Service panel

    Started by JIM MURPHY, 11-03-2010 08:12 PM
    • Replies: 15
    • Views: 8,355
    bob smit
    11-09-2010, 09:36 AM Go to last post

  67. Question Results of non-certified electrical work.

    Started by Zane Lemon, 11-08-2010 10:14 AM
    1 Attachment(s)
    • Replies: 3
    • Views: 6,042
    John Kogel
    11-08-2010, 07:59 PM Go to last post

  68. Zinsco - Line vs load side of breaker

    Started by Terry Beck, 11-05-2010 06:49 PM
    2 Attachment(s)
    • Replies: 1
    • Views: 5,892
    Roger Frazee
    11-08-2010, 12:32 AM Go to last post

  69. From the old board, Lightning Strikes

    Started by Tim Moreira, 04-01-2007 11:46 PM
    • Replies: 3
    • Views: 7,259
    Michael Thomas
    11-06-2010, 11:51 AM Go to last post

  70. One service, two panels

    Started by sidney alstad, 11-03-2010 04:31 PM
    3 Attachment(s)
    • Replies: 10
    • Views: 6,628
    Markus Keller
    11-04-2010, 02:53 PM Go to last post

  71. Residential Main Breaker Tap

    Started by Trent Posner, 11-02-2010 05:59 AM
    • Replies: 4
    • Views: 6,675
    ken horak
    11-03-2010, 04:29 PM Go to last post

  72. Service Panel Inside Bedroom Closet

    Started by Nick Ostrowski, 10-22-2010 08:21 AM
    • Replies: 26
    • Views: 21,712
    Jerry Peck
    11-03-2010, 04:19 PM Go to last post

  73. 70 amp breaker for range/oven

    Started by sidney alstad, 10-28-2010 01:41 PM
    1 Attachment(s)
    • Replies: 28
    • Views: 26,456
    Lou Romano
    11-01-2010, 03:20 PM Go to last post

  74. Cutler Hammer breaker identification help

    Started by Robert Foster, 10-28-2010 01:50 PM
    2 Attachment(s)
    • Replies: 10
    • Views: 14,418
    Tony Peluso
    11-01-2010, 03:10 PM Go to last post

  75. Undersized Panels?

    Started by Charles Holt, 10-29-2010 04:22 PM
    6 Attachment(s)
    • Replies: 16
    • Views: 9,442
    Charles Holt
    10-31-2010, 06:23 PM Go to last post

Thread Display Options

Use this control to limit the display of threads to those newer than the specified time frame.

Allows you to choose the data by which the thread list will be sorted.

Order threads in...

Note: when sorting by date, 'descending order' will show the newest results first.

Icon Legend

Contains unread posts
Contains unread posts
Contains no unread posts
Contains no unread posts
More than 25 replies or 10000 views
Hot thread with unread posts
More than 25 replies or 10000 views
Hot thread with no unread posts
Closed Thread
Thread is closed
Thread Contains a Message Written By You
You have posted in this thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules