1. Announcement:
    InspectionNews Message Board Rules, Policies, and Disclaimers
    Brian Hannigan (Administrator)
    04-16-2007
    Views:
    1,669,203

Forum: Electrical Systems: Home Inspection and Commercial Inspection

Service Conductors, Panels, Overcurrent Protection Devices, Wiring Types and Methods, Switches, Receptacles, Light Fixtures ... For Home Inspections & Commercial Inspections

  1. Cool Theater lighting

    Started by Thomas Tadd, 01-17-2011 08:42 AM
    • Replies: 5
    • Views: 3,512
    Ted Menelly
    01-18-2011, 08:33 PM Go to last post

  2. Service entrance conductors, mismatched size at rthe mast head.

    Started by David D. Whitt, 01-16-2011 02:56 PM
    3 Attachment(s)
    • Replies: 15
    • Views: 10,929
    David D. Whitt
    01-17-2011, 05:40 PM Go to last post

  3. The 2011 NEC

    Started by Michael Thomas, 01-16-2011 04:29 AM
    • Replies: 3
    • Views: 3,415
    Speedy Petey
    01-17-2011, 04:24 PM Go to last post

  4. Service cable in conduit

    Started by Fred Klein, 01-14-2011 09:04 AM
    • Replies: 2
    • Views: 5,263
    H.G. Watson, Sr.
    01-14-2011, 03:19 PM Go to last post

  5. Wiring in spray foam insulation

    Started by Darrel Hood, 10-25-2009 10:32 AM
    • Replies: 11
    • Views: 15,974
    Joseph Ehrhardt
    01-14-2011, 05:52 AM Go to last post

  6. leviton gfci code update

    Started by CHARLIE VAN FLEET, 01-12-2011 05:34 PM
    • Replies: 3
    • Views: 4,515
    Nolan Kienitz
    01-13-2011, 11:01 AM Go to last post

  7. High voltage power lines

    Started by Ron Bishop, 01-06-2011 06:46 PM
    1 Attachment(s)
    • Replies: 26
    • Views: 15,672
    Jerry Peck
    01-11-2011, 04:34 PM Go to last post

  8. Warm switch

    Started by Ernie Simpson, 01-05-2011 09:13 AM
    • Replies: 6
    • Views: 4,214
    Speedy Petey
    01-10-2011, 02:59 PM Go to last post

  9. Electrical thread at a DIY forum.

    Started by Rollie Meyers, 12-20-2010 11:09 PM
    • Replies: 12
    • Views: 6,804
    Speedy Petey
    01-10-2011, 02:35 PM Go to last post

  10. Neutral CCC

    Started by Marc M, 01-06-2011 08:48 PM
    2 Attachment(s)
    • Replies: 10
    • Views: 5,624
    H.G. Watson, Sr.
    01-09-2011, 11:11 AM Go to last post

  11. Bonding Question

    Started by Robert Foster, 01-08-2011 08:34 AM
    • Replies: 5
    • Views: 4,265
    Corn Walker
    01-09-2011, 06:21 AM Go to last post

  12. Missing ground?

    Started by sidney alstad, 01-07-2011 03:33 PM
    3 Attachment(s)
    • Replies: 3
    • Views: 3,505
    Jerry Peck
    01-08-2011, 07:04 AM Go to last post

  13. Should AFCI breakers be installed on circuits that have GFCI's ?

    Started by Gene South, 11-22-2010 05:24 PM
    • Replies: 19
    • Views: 49,146
    Jerry Peck
    01-07-2011, 06:50 PM Go to last post

  14. cat 5 cable

    Started by Jerome W. Young, 04-20-2008 06:12 AM
    • Replies: 7
    • Views: 5,554
    That Guy
    01-07-2011, 10:56 AM Go to last post

  15. Defects at service panel & distribution panel?

    Started by Joseph Peake, 01-04-2011 11:07 AM
    5 Attachment(s)
    • Replies: 5
    • Views: 6,957
    John Kogel
    01-04-2011, 07:53 PM Go to last post

  16. How much is to much?

    Started by Ed Martino, 12-31-2010 03:58 PM
    • Replies: 23
    • Views: 8,037
    H.G. Watson, Sr.
    01-04-2011, 08:41 AM Go to last post

  17. Would you consider this a problem by definition

    Started by Gene South, 12-15-2010 08:15 PM
    • Replies: 24
    • Views: 6,502
    Garrett Tan
    12-22-2010, 05:19 PM Go to last post

  18. Never have seen this before

    Started by Jim Adams, 12-22-2010 12:08 PM
    2 Attachment(s)
    • Replies: 0
    • Views: 2,636
    Jim Adams
    12-22-2010, 12:08 PM Go to last post

  19. Amalgamated Electric Corp Panel: Breakers?

    Started by Shawn Willy, 06-18-2009 12:31 PM
    6 Attachment(s)
    • Replies: 14
    • Views: 35,781
    Shawn Willy
    12-21-2010, 11:18 AM Go to last post

  20. Bonding under the kitchen sink

    Started by Luc V. L., 12-20-2010 03:34 PM
    1 Attachment(s)
    • Replies: 2
    • Views: 2,969
    Jerry Peck
    12-20-2010, 03:44 PM Go to last post

  21. Energysaver 1800

    Started by Matt Fellman, 12-10-2010 08:13 PM
    • Replies: 12
    • Views: 6,996
    Matt Fellman
    12-18-2010, 10:14 PM Go to last post

  22. Open Neutral

    Started by Sam Morris, 12-17-2010 05:15 PM
    1 Attachment(s)
    • Replies: 5
    • Views: 9,461
    H.G. Watson, Sr.
    12-18-2010, 08:45 AM Go to last post

  23. Outlet Required?

    Started by Matt Fellman, 12-08-2010 03:57 PM
    3 Attachment(s)
    • Replies: 29
    • Views: 8,503
    H.G. Watson, Sr.
    12-17-2010, 05:01 PM Go to last post

  24. Oxidized conductors

    Started by Marc M, 12-15-2010 04:12 PM
    2 Attachment(s)
    • Replies: 15
    • Views: 4,281
    bob smit
    12-17-2010, 03:57 PM Go to last post

  25. Electrical test tools made in china

    Started by LEO304E CARR, 12-15-2010 04:23 PM
    • Replies: 2
    • Views: 2,998
    John Steinke
    12-17-2010, 04:44 AM Go to last post

  26. Alum ground on branch ckt

    Started by Matt Fellman, 12-16-2010 12:32 AM
    3 Attachment(s)
    • Replies: 4
    • Views: 3,662
    Matt Fellman
    12-16-2010, 11:09 AM Go to last post

  27. Ungrounded 3 prong plugs

    Started by David OKeefe, 12-11-2010 10:15 PM
    • Replies: 40
    • Views: 11,567
    Rick Cantrell
    12-15-2010, 07:48 PM Go to last post

  28. junction boxes

    Started by tony voss, 12-15-2010 04:22 PM
    • Replies: 3
    • Views: 3,524
    Tony Cole
    12-15-2010, 07:27 PM Go to last post

  29. Quick question, no pic

    Started by Ross Neag, 12-10-2010 02:54 PM
    • Replies: 4
    • Views: 3,049
    H.G. Watson, Sr.
    12-10-2010, 05:01 PM Go to last post

  30. Single Strand Copper as Service Cable

    Started by Nick Ostrowski, 11-14-2010 05:33 AM
    2 Pages •
    1 2
    6 Attachment(s)
    • Replies: 111
    • Views: 20,501
    brian schmitt
    12-10-2010, 09:30 AM Go to last post

  31. Unusual ganged breaker with a hold screw through the center of it.

    Started by Don Burbach, 12-06-2010 09:53 AM
    2 Attachment(s)
    • Replies: 9
    • Views: 5,278
    Jim Port
    12-09-2010, 06:08 AM Go to last post

  32. Touch-Plate

    Started by Jeffrey L. Mathis, 12-07-2010 04:32 PM
    • Replies: 5
    • Views: 4,825
    Bob Elliott
    12-08-2010, 02:17 AM Go to last post

  33. Basic Portland OR code Q's

    Started by Josh Gourley, 12-04-2010 09:30 AM
    • Replies: 13
    • Views: 8,774
    H.G. Watson, Sr.
    12-05-2010, 04:02 PM Go to last post

  34. Two service panels

    Started by william siegel, 11-26-2010 07:47 PM
    7 Attachment(s)
    • Replies: 29
    • Views: 16,270
    Bill Kriegh
    12-02-2010, 08:50 PM Go to last post

  35. Device Identification?

    Started by Robert Foster, 12-01-2010 03:59 PM
    1 Attachment(s)
    • Replies: 5
    • Views: 3,474
    Rick Cantrell
    12-02-2010, 05:15 AM Go to last post

  36. Two conductors on CH type breakers

    Started by Roger Frazee, 12-01-2010 11:04 PM
    • Replies: 0
    • Views: 2,258
    Roger Frazee
    12-01-2010, 11:04 PM Go to last post

  37. same gauge req'd on sq D double tap?

    Started by Matt Fellman, 12-01-2010 12:22 AM
    • Replies: 20
    • Views: 8,241
    Corn Walker
    12-01-2010, 07:47 PM Go to last post

  38. Old, sealed main panel

    Started by Luc V. L., 11-23-2010 09:49 PM
    3 Attachment(s)
    • Replies: 14
    • Views: 4,298
    George Wells
    11-30-2010, 10:28 AM Go to last post

  39. No businees in the last month

    Started by Barney Cheeseman, 11-27-2010 08:14 AM
    • Replies: 6
    • Views: 3,911
    Rick Hurst
    11-27-2010, 10:38 PM Go to last post

  40. Question RE: FAU disconnect

    Started by Marc M, 11-23-2010 09:58 PM
    • Replies: 30
    • Views: 12,510
    Jerry Peck
    11-27-2010, 06:46 PM Go to last post

  41. Conductor corrosion and chinese drywall

    Started by Roger Frazee, 11-26-2010 09:43 AM
    • Replies: 9
    • Views: 4,967
    Roger Frazee
    11-26-2010, 10:13 PM Go to last post

  42. Interesting article about al conductors

    Started by Roger Frazee, 11-21-2010 02:14 PM
    • Replies: 2
    • Views: 3,002
    David Argabright
    11-25-2010, 12:17 PM Go to last post

  43. Dual feeds from breaker

    Started by Gary Bottomley, 11-22-2010 08:07 PM
    2 Attachment(s)
    • Replies: 19
    • Views: 11,738
    John Kogel
    11-25-2010, 10:01 AM Go to last post

  44. Double Tap At Main Lug

    Started by Sam Morris, 11-23-2010 07:19 PM
    2 Attachment(s)
    • Replies: 5
    • Views: 5,108
    John Arnold
    11-24-2010, 03:48 AM Go to last post

  45. Electrical upgrade

    Started by Eric Van De Ven, 11-23-2010 07:30 AM
    4 Attachment(s)
    • Replies: 2
    • Views: 3,307
    John Kogel
    11-23-2010, 07:43 PM Go to last post

  46. Would you write "Your electrical system is perfectly fine."

    Started by Benjamin Gromicko, 11-14-2010 01:36 PM
    1 Attachment(s)
    • Replies: 52
    • Views: 8,382
    Rolland Pruner
    11-23-2010, 05:11 PM Go to last post

  47. Question Number of downline outlets on GFCI

    Started by Ron Tipton, 11-20-2010 03:38 PM
    1 Attachment(s)
    • Replies: 35
    • Views: 30,559
    John Kogel
    11-22-2010, 07:26 PM Go to last post

  48. Sub panel feeder cables

    Started by Thomas Thayer, 11-22-2010 02:23 PM
    2 Attachment(s)
    • Replies: 8
    • Views: 5,048
    Rick Cantrell
    11-22-2010, 06:06 PM Go to last post

  49. Aluminum - antioxidant coating

    Started by Ken Amelin, 11-21-2010 08:58 AM
    • Replies: 1
    • Views: 9,035
    Roger Frazee
    11-21-2010, 12:02 PM Go to last post

  50. Flat bar for feed from meter to main panel

    Started by stanley frost, 11-19-2010 05:33 AM
    2 Attachment(s)
    • Replies: 16
    • Views: 4,489
    Roger Frazee
    11-20-2010, 10:38 PM Go to last post

  51. Rusted lug

    Started by David Garton, 11-13-2010 10:05 PM
    • Replies: 12
    • Views: 4,367
    Lloyd Miller
    11-19-2010, 09:23 PM Go to last post

  52. Splitting the pump load on a rental

    Started by Michael Merriman, 11-09-2010 08:19 PM
    3 Attachment(s)
    • Replies: 9
    • Views: 3,694
    Roger Frazee
    11-18-2010, 03:51 PM Go to last post

  53. GFCIs help

    Started by JIM MURPHY, 11-17-2010 05:24 AM
    • Replies: 29
    • Views: 7,006
    H.G. Watson, Sr.
    11-18-2010, 10:24 AM Go to last post

  54. Challenger circuit breker help

    Started by Robert Foster, 11-16-2010 10:09 AM
    2 Attachment(s)
    • Replies: 17
    • Views: 8,171
    Roger Frazee
    11-17-2010, 11:31 PM Go to last post

  55. 3 Cable Feeder

    Started by mathew stouffer, 11-10-2010 10:26 PM
    12 Attachment(s)
    • Replies: 41
    • Views: 7,616
    Roger Frazee
    11-16-2010, 08:30 PM Go to last post

  56. FPE Distribution Panels.

    Started by mathew stouffer, 11-13-2010 09:19 AM
    3 Attachment(s)
    • Replies: 4
    • Views: 4,800
    mathew stouffer
    11-15-2010, 06:53 PM Go to last post

  57. Remove the neutral bonding screw?

    Started by John Kogel, 11-08-2010 09:54 AM
    7 Attachment(s)
    • Replies: 18
    • Views: 10,422
    John Steinke
    11-14-2010, 09:09 AM Go to last post

  58. Too many wafer breakers in panel

    Started by mathew stouffer, 11-06-2010 08:35 AM
    8 Attachment(s)
    • Replies: 25
    • Views: 14,178
    bob smit
    11-11-2010, 09:48 AM Go to last post

  59. Question Low Voltage Wiring concerns

    Started by Mike Birenbaum, 11-10-2010 12:56 PM
    • Replies: 2
    • Views: 3,570
    Ricky Wells
    11-10-2010, 03:51 PM Go to last post

  60. Easy electrical question?? Branch circuits from living room to bathroom

    Started by kenny martin, 11-03-2010 05:27 AM
    • Replies: 22
    • Views: 8,108
    Roger Frazee
    11-09-2010, 07:09 PM Go to last post

  61. discolored bus bar

    Started by Chris Hart, 11-03-2010 04:51 PM
    2 Attachment(s)
    • Replies: 13
    • Views: 13,980
    Mike Clarke
    11-09-2010, 06:20 PM Go to last post

  62. Service panel

    Started by JIM MURPHY, 11-03-2010 08:12 PM
    • Replies: 15
    • Views: 6,139
    bob smit
    11-09-2010, 09:36 AM Go to last post

  63. Question Results of non-certified electrical work.

    Started by Zane Lemon, 11-08-2010 10:14 AM
    1 Attachment(s)
    • Replies: 3
    • Views: 4,168
    John Kogel
    11-08-2010, 07:59 PM Go to last post

  64. Zinsco - Line vs load side of breaker

    Started by Terry Beck, 11-05-2010 06:49 PM
    2 Attachment(s)
    • Replies: 1
    • Views: 4,443
    Roger Frazee
    11-08-2010, 12:32 AM Go to last post

  65. From the old board, Lightning Strikes

    Started by Tim Moreira, 04-01-2007 11:46 PM
    • Replies: 3
    • Views: 5,157
    Michael Thomas
    11-06-2010, 11:51 AM Go to last post

  66. One service, two panels

    Started by sidney alstad, 11-03-2010 04:31 PM
    3 Attachment(s)
    • Replies: 10
    • Views: 3,841
    Markus Keller
    11-04-2010, 02:53 PM Go to last post

  67. Residential Main Breaker Tap

    Started by Trent Posner, 11-02-2010 05:59 AM
    • Replies: 4
    • Views: 4,614
    ken horak
    11-03-2010, 04:29 PM Go to last post

  68. Service Panel Inside Bedroom Closet

    Started by Nick Ostrowski, 10-22-2010 08:21 AM
    • Replies: 26
    • Views: 17,255
    Jerry Peck
    11-03-2010, 04:19 PM Go to last post

  69. 70 amp breaker for range/oven

    Started by sidney alstad, 10-28-2010 01:41 PM
    1 Attachment(s)
    • Replies: 28
    • Views: 15,906
    Lou Romano
    11-01-2010, 03:20 PM Go to last post

  70. Cutler Hammer breaker identification help

    Started by Robert Foster, 10-28-2010 01:50 PM
    2 Attachment(s)
    • Replies: 10
    • Views: 9,465
    Tony Peluso
    11-01-2010, 03:10 PM Go to last post

  71. Undersized Panels?

    Started by Charles Holt, 10-29-2010 04:22 PM
    6 Attachment(s)
    • Replies: 16
    • Views: 6,740
    Charles Holt
    10-31-2010, 06:23 PM Go to last post

  72. Code of Ethics Question

    Started by Bill Anglin, 10-27-2010 10:29 AM
    • Replies: 5
    • Views: 3,112
    John Steinke
    10-29-2010, 04:11 AM Go to last post

  73. 2X tap at FPE panel

    Started by Michael Thomas, 10-21-2010 02:45 PM
    6 Attachment(s)
    • Replies: 26
    • Views: 6,130
    Michael Thomas
    10-29-2010, 03:59 AM Go to last post

  74. Where is the neutral?

    Started by Ed Bliss, 10-28-2010 03:24 PM
    2 Attachment(s)
    • Replies: 7
    • Views: 3,731
    Bill Hetner
    10-29-2010, 01:36 AM Go to last post

  75. 4/0 copper service wire

    Started by sidney alstad, 09-27-2010 05:16 PM
    3 Attachment(s)
    • Replies: 32
    • Views: 9,449
    sidney alstad
    10-28-2010, 01:24 PM Go to last post

Thread Display Options

Use this control to limit the display of threads to those newer than the specified time frame.

Allows you to choose the data by which the thread list will be sorted.

Order threads in...

Note: when sorting by date, 'descending order' will show the newest results first.

Icon Legend

Contains unread posts
Contains unread posts
Contains no unread posts
Contains no unread posts
More than 25 replies or 10000 views
Hot thread with unread posts
More than 25 replies or 10000 views
Hot thread with no unread posts
Closed Thread
Thread is closed
Thread Contains a Message Written By You
You have posted in this thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules