1. Announcement:
    InspectionNews Message Board Rules, Policies, and Disclaimers
    Brian Hannigan (Administrator)
    04-16-2007
    Views:
    81,127

Forum: Electrical Systems: Home Inspection and Commercial Inspection

Service Conductors, Panels, Overcurrent Protection Devices, Wiring Types and Methods, Switches, Receptacles, Light Fixtures ... For Home Inspections & Commercial Inspections

  1. Feed From Main Panel to Sub Panel

    Started by Nick Ostrowski, 05-25-2008 05:40 AM
    1 Attachment(s)
    • Replies: 7
    • Views: 12,566
    Jerry Peck
    05-25-2008, 05:38 PM Go to last post

  2. Wall scones in a tub surround

    Started by Randy Clayton, 05-06-2008 07:39 PM
    4 Attachment(s)
    • Replies: 19
    • Views: 3,377
    Michael Greenwalt
    05-24-2008, 09:40 AM Go to last post

  3. Sorry if this is an overpost. Pulling 120 volts from a 240 breaker

    Started by Paul Kondzich, 05-20-2008 07:46 PM
    2 Attachment(s)
    • Replies: 5
    • Views: 1,532
    Randy Clayton
    05-22-2008, 07:18 PM Go to last post

  4. Grounding electrode conductor size for copper

    Started by Wendell Swedberg, 05-20-2008 05:02 PM
    • Replies: 2
    • Views: 3,874
    Jerry Peck
    05-20-2008, 06:48 PM Go to last post

  5. How to word this...Obsolete service

    Started by Paul Kondzich, 05-20-2008 02:50 PM
    2 Attachment(s)
    • Replies: 0
    • Views: 979
    Paul Kondzich
    05-20-2008, 02:50 PM Go to last post

  6. Question Open ground outlets

    Started by Trent Tarter, 05-16-2008 08:47 PM
    • Replies: 6
    • Views: 3,396
    Matthew Barnicle
    05-19-2008, 10:13 PM Go to last post

  7. Sure test 61-165

    Started by David Banks, 05-16-2008 09:03 PM
    2 Attachment(s)
    • Replies: 5
    • Views: 1,928
    Jeff Spencer
    05-19-2008, 08:39 PM Go to last post

  8. single strand ground

    Started by John Arnold, 05-19-2008 10:49 AM
    1 Attachment(s)
    • Replies: 2
    • Views: 1,009
    Jerry Peck
    05-19-2008, 06:30 PM Go to last post

  9. Location of panelboard

    Started by RobertSmith, 05-18-2008 04:31 PM
    • Replies: 3
    • Views: 2,121
    Richard Stanley
    05-19-2008, 11:15 AM Go to last post

  10. Minimum conductor size

    Started by Wendell Swedberg, 05-17-2008 02:36 PM
    • Replies: 3
    • Views: 3,208
    Jerry Peck
    05-18-2008, 05:14 PM Go to last post

  11. Size of dedicated branch circuit

    Started by Wendell Swedberg, 04-21-2008 04:05 PM
    • Replies: 10
    • Views: 2,584
    Brandon Chew
    05-18-2008, 12:37 PM Go to last post

  12. Dimmer switches

    Started by Wendell Swedberg, 05-17-2008 06:22 AM
    • Replies: 3
    • Views: 1,576
    Brandon Chew
    05-18-2008, 11:41 AM Go to last post

  13. recent insp

    Started by Markus Keller, 05-17-2008 06:45 PM
    • Replies: 0
    • Views: 1,074
    Markus Keller
    05-17-2008, 06:45 PM Go to last post

  14. Cables entering distribution panels

    Started by mathew stouffer, 05-16-2008 08:02 AM
    1 Attachment(s)
    • Replies: 4
    • Views: 1,451
    John Steinke
    05-16-2008, 06:10 PM Go to last post

  15. Talking Fire suppression light

    Started by Jonathan Cartwright, 05-14-2008 06:57 AM
    2 Attachment(s)
    • Replies: 5
    • Views: 1,318
    John Steinke
    05-16-2008, 06:07 PM Go to last post

  16. Fused main

    Started by Jerome W. Young, 05-14-2008 01:10 PM
    3 Attachment(s)
    • Replies: 5
    • Views: 1,550
    John Steinke
    05-16-2008, 06:05 PM Go to last post

  17. New "tamper Resistant Receptacles"

    Started by Jerry Peck, 05-13-2008 06:56 PM
    • Replies: 6
    • Views: 1,946
    John Steinke
    05-16-2008, 06:01 PM Go to last post

  18. Question extension cord or not

    Started by Glen Stevenson, 05-14-2008 04:58 PM
    • Replies: 5
    • Views: 1,793
    John Steinke
    05-16-2008, 05:59 PM Go to last post

  19. Switched Outlet w/out GFCI under sink

    Started by Bruce Ramsey, 05-14-2008 06:37 PM
    1 Attachment(s)
    • Replies: 7
    • Views: 10,579
    Jerry Peck
    05-15-2008, 08:37 PM Go to last post

  20. What happened to this lightning arrestor?

    Started by Chris Stichter, 05-14-2008 02:47 PM
    1 Attachment(s)
    • Replies: 2
    • Views: 1,365
    Jim Luttrall
    05-14-2008, 02:53 PM Go to last post

  21. Thumbs up AFCI Breakers or NOT

    Started by Al Roden, 01-24-2008 04:14 PM
    • Replies: 60
    • Views: 15,627
    Jerry Peck
    05-14-2008, 01:09 PM Go to last post

  22. multiple taps at main

    Started by Jerome W. Young, 05-13-2008 06:26 PM
    2 Attachment(s)
    • Replies: 3
    • Views: 1,124
    Jerry Peck
    05-14-2008, 01:02 PM Go to last post

  23. Pushmatic questons

    Started by Michael Thomas, 05-13-2008 07:52 PM
    2 Attachment(s)
    • Replies: 2
    • Views: 1,392
    Michael Thomas
    05-14-2008, 03:08 AM Go to last post

  24. Denergizing Panel Requirement

    Started by Nick Ostrowski, 05-13-2008 07:15 AM
    • Replies: 4
    • Views: 2,021
    Nick Ostrowski
    05-13-2008, 10:01 PM Go to last post

  25. AFCI false trip

    Started by Jerome W. Young, 05-13-2008 06:50 PM
    1 Attachment(s)
    • Replies: 0
    • Views: 1,345
    Jerome W. Young
    05-13-2008, 06:50 PM Go to last post

  26. Door Opener Box

    Started by Greg Frazier, 05-10-2008 10:23 AM
    1 Attachment(s)
    • Replies: 5
    • Views: 1,546
    Jerry Peck
    05-13-2008, 05:52 PM Go to last post

  27. bulldog push matic

    Started by Jerome W. Young, 05-08-2008 03:36 AM
    1 Attachment(s)
    • Replies: 8
    • Views: 4,752
    Evan Grugett
    05-10-2008, 08:56 AM Go to last post

  28. FPE and Zinsco Panels

    Started by Bob Lynett, 05-08-2008 08:22 AM
    • Replies: 9
    • Views: 2,652
    Tom Rollins
    05-10-2008, 07:54 AM Go to last post

  29. Aluminum wiring with AFCI breakers

    Started by Michael Vasquez, 05-08-2008 06:50 PM
    • Replies: 7
    • Views: 7,400
    Jerry Peck
    05-09-2008, 08:25 PM Go to last post

  30. Breakers for air conditioner?

    Started by Charles Smith, 05-07-2008 10:07 PM
    2 Attachment(s)
    • Replies: 3
    • Views: 7,747
    John Steinke
    05-09-2008, 05:55 PM Go to last post

  31. Light in storage spaces and closet

    Started by mathew stouffer, 04-30-2008 07:34 AM
    • Replies: 13
    • Views: 3,685
    Jerry Peck
    05-07-2008, 04:45 PM Go to last post

  32. any suggestions for this exposed feeder

    Started by Jerome W. Young, 05-07-2008 04:24 PM
    1 Attachment(s)
    • Replies: 1
    • Views: 1,207
    Jerry Peck
    05-07-2008, 04:39 PM Go to last post

  33. copalum verses purple wire nut

    Started by CHARLIE VAN FLEET, 04-29-2008 03:49 PM
    3 Attachment(s)
    • Replies: 25
    • Views: 15,524
    James Duffin
    05-06-2008, 05:58 PM Go to last post

  34. old main /fuse

    Started by Jerome W. Young, 05-05-2008 01:46 PM
    2 Attachment(s)
    • Replies: 3
    • Views: 1,404
    Markus Keller
    05-06-2008, 07:37 AM Go to last post

  35. Subpanel quickie

    Started by Ross Neag, 05-05-2008 07:57 PM
    2 Attachment(s)
    • Replies: 5
    • Views: 1,889
    Ross Neag
    05-05-2008, 08:19 PM Go to last post

  36. All circuits 12/3 in panel

    Started by Dave Mortensen, 05-02-2008 06:41 PM
    1 Attachment(s)
    • Replies: 31
    • Views: 2,416
    John Steinke
    05-05-2008, 06:14 PM Go to last post

  37. Power to both buss bars

    Started by Lee Nettnin, 05-03-2008 01:22 PM
    4 Attachment(s)
    • Replies: 15
    • Views: 2,754
    Lee Nettnin
    05-05-2008, 04:01 AM Go to last post

  38. what label?

    Started by Ken Meyer, 05-01-2008 09:25 PM
    1 Attachment(s)
    • Replies: 8
    • Views: 1,441
    Randy Clayton
    05-02-2008, 07:44 PM Go to last post

  39. Minimum branch circuit sizing

    Started by Wendell Swedberg, 05-02-2008 04:45 PM
    2 Attachment(s)
    • Replies: 4
    • Views: 2,780
    Jerry Peck
    05-02-2008, 07:28 PM Go to last post

  40. Maximum fill for conductors in a panel board

    Started by Wendell Swedberg, 04-30-2008 04:20 PM
    1 Attachment(s)
    • Replies: 3
    • Views: 2,247
    Jerry Peck
    04-30-2008, 06:29 PM Go to last post

  41. Amperage Draw

    Started by Jim Robinson, 04-30-2008 01:29 PM
    • Replies: 6
    • Views: 2,649
    Jerry Peck
    04-30-2008, 06:08 PM Go to last post

  42. Minimum branch ckt requirement

    Started by Wendell Swedberg, 04-27-2008 12:14 PM
    • Replies: 7
    • Views: 2,661
    Jerry Peck
    04-30-2008, 07:56 AM Go to last post

  43. single grounding rod

    Started by Wendell Swedberg, 04-29-2008 05:08 PM
    • Replies: 5
    • Views: 5,003
    Wendell Swedberg
    04-30-2008, 05:41 AM Go to last post

  44. adjacent panels

    Started by Jerome W. Young, 04-28-2008 06:06 PM
    1 Attachment(s)
    • Replies: 10
    • Views: 1,829
    Jerry Peck
    04-29-2008, 03:45 PM Go to last post

  45. spa pump pressure switch in panel

    Started by Jerome W. Young, 04-29-2008 01:03 PM
    1 Attachment(s)
    • Replies: 1
    • Views: 1,490
    Jerry Peck
    04-29-2008, 03:36 PM Go to last post

  46. non service panel / insulated grounds

    Started by Jerome W. Young, 04-29-2008 12:29 PM
    • Replies: 1
    • Views: 1,055
    Gunnar Alquist
    04-29-2008, 03:20 PM Go to last post

  47. box cut into block wall

    Started by william siegel, 04-28-2008 07:22 PM
    1 Attachment(s)
    • Replies: 1
    • Views: 1,493
    Jerry Peck
    04-28-2008, 07:53 PM Go to last post

  48. Disconnect for "sub" panel

    Started by Jon Randolph, 04-28-2008 07:50 AM
    • Replies: 2
    • Views: 4,117
    Jerry Peck
    04-28-2008, 08:44 AM Go to last post

  49. 7th Grader Performs Electrical Work for School Project

    Started by Nick Ostrowski, 04-27-2008 09:34 AM
    4 Attachment(s)
    • Replies: 5
    • Views: 1,544
    Markus Keller
    04-28-2008, 08:04 AM Go to last post

  50. Main disconnect breakers

    Started by Tom Rees, 04-26-2008 09:25 AM
    • Replies: 8
    • Views: 3,945
    Tom Rees
    04-26-2008, 07:47 PM Go to last post

  51. knob and tube removal

    Started by Matthew Barnicle, 04-23-2008 10:26 AM
    • Replies: 12
    • Views: 8,068
    Jerry Peck
    04-26-2008, 06:59 PM Go to last post

  52. GFCI puzzle

    Started by Ken Meyer, 04-24-2008 10:58 PM
    • Replies: 4
    • Views: 1,517
    Randy Clayton
    04-26-2008, 05:30 PM Go to last post

  53. Here's where you plug in the sump pump

    Started by Eric Laney, 04-25-2008 12:39 PM
    1 Attachment(s)
    • Replies: 1
    • Views: 2,097
    John Arnold
    04-25-2008, 05:21 PM Go to last post

  54. too close to service entry?

    Started by Ken Meyer, 04-24-2008 11:52 PM
    3 Attachment(s)
    • Replies: 5
    • Views: 1,426
    Aaron Miller
    04-25-2008, 02:01 PM Go to last post

  55. Smile "Condo 2" - let's try to solve this

    Started by Jerry Peck, 04-22-2008 01:44 PM
    1 Attachment(s)
    • Replies: 19
    • Views: 1,904
    Aaron Miller
    04-24-2008, 04:14 AM Go to last post

  56. Condo 50 Amp Main

    Started by David Banks, 04-12-2008 11:37 AM
    2 Pages •
    1 2
    3 Attachment(s)
    • Replies: 115
    • Views: 9,545
    Russel Ray
    04-23-2008, 09:06 PM Go to last post

  57. Question Water pipe ground question

    Started by Greg Jenkins, 04-22-2008 08:43 AM
    • Replies: 4
    • Views: 10,703
    Greg Jenkins
    04-23-2008, 06:29 PM Go to last post

  58. Conductor Ampacity

    Started by Wendell Swedberg, 04-23-2008 12:12 PM
    • Replies: 6
    • Views: 1,776
    Gunnar Alquist
    04-23-2008, 06:14 PM Go to last post

  59. pop goes the inspector

    Started by John Arnold, 04-23-2008 01:54 PM
    1 Attachment(s)
    • Replies: 3
    • Views: 1,231
    Michael Larson
    04-23-2008, 02:51 PM Go to last post

  60. Non Insulated Neutral

    Started by Jim Robinson, 04-22-2008 03:06 PM
    1 Attachment(s)
    • Replies: 3
    • Views: 1,943
    Jerry Peck
    04-22-2008, 04:44 PM Go to last post

  61. No room for new breaker? no problem!

    Started by Terry Beck, 04-21-2008 05:41 PM
    2 Attachment(s)
    • Replies: 2
    • Views: 1,477
    Terry Beck
    04-21-2008, 06:11 PM Go to last post

  62. Angry USED EQUIPMENT SHOULD NEVER BE REUSED!

    Started by Joe Tedesco, 04-21-2008 06:46 AM
    1 Attachment(s)
    • Replies: 7
    • Views: 1,587
    Randy Aldering
    04-21-2008, 05:22 PM Go to last post

  63. Service and load side panels in close proximity

    Started by Michael Thomas, 04-21-2008 08:19 AM
    2 Attachment(s)
    • Replies: 2
    • Views: 1,243
    Michael Thomas
    04-21-2008, 09:08 AM Go to last post

  64. Unknown device

    Started by Jonathan Cartwright, 04-14-2008 10:33 AM
    3 Attachment(s)
    • Replies: 4
    • Views: 1,893
    Jonathan Cartwright
    04-21-2008, 06:58 AM Go to last post

  65. quick disconnects

    Started by tim larkins, 04-18-2008 07:08 PM
    2 Attachment(s)
    • Replies: 5
    • Views: 1,376
    Jerry Peck
    04-20-2008, 05:00 PM Go to last post

  66. Separate receptacle for GDO

    Started by Ross Neag, 04-18-2008 09:15 PM
    1 Attachment(s)
    • Replies: 5
    • Views: 1,709
    Jon Randolph
    04-19-2008, 06:33 PM Go to last post

  67. Today's widowmaker

    Started by Eric Laney, 04-14-2008 01:28 PM
    3 Attachment(s)
    • Replies: 6
    • Views: 1,686
    Peter Plein
    04-18-2008, 04:37 PM Go to last post

  68. Bundled conductors

    Started by Greg Jenkins, 04-18-2008 07:45 AM
    2 Attachment(s)
    • Replies: 4
    • Views: 1,453
    Greg Jenkins
    04-18-2008, 08:28 AM Go to last post

  69. Wired smoke Alarms required in older homes

    Started by Terry Beck, 04-17-2008 10:16 PM
    • Replies: 1
    • Views: 5,358
    Richard Moore
    04-18-2008, 01:47 AM Go to last post

  70. Volume of JB vs # of conductors

    Started by Wendell Swedberg, 04-17-2008 07:28 PM
    • Replies: 1
    • Views: 1,176
    Dom D'Agostino
    04-17-2008, 10:28 PM Go to last post

  71. Wierd da meter go?

    Started by Victor DaGraca, 04-17-2008 05:48 PM
    2 Attachment(s)
    • Replies: 1
    • Views: 1,057
    Jerry Peck
    04-17-2008, 05:53 PM Go to last post

  72. grounding electrode conductor

    Started by Jerome W. Young, 04-16-2008 04:09 AM
    2 Attachment(s)
    • Replies: 4
    • Views: 1,775
    Jerry Peck
    04-16-2008, 11:59 AM Go to last post

  73. Siemens 60amp breaker in ITE panel ok?

    Started by Ross Neag, 04-15-2008 10:32 PM
    • Replies: 1
    • Views: 2,812
    James Duffin
    04-16-2008, 05:01 AM Go to last post

  74. Too much for 200A

    Started by Matt Fellman, 03-26-2008 10:38 PM
    3 Pages •
    1 2 3
    11 Attachment(s)
    • Replies: 188
    • Views: 9,789
    James Duffin
    04-15-2008, 07:14 PM Go to last post

  75. square d afci recall

    Started by CHARLIE VAN FLEET, 04-14-2008 06:48 AM
    • Replies: 0
    • Views: 1,476
    CHARLIE VAN FLEET
    04-14-2008, 06:48 AM Go to last post

Thread Display Options

Use this control to limit the display of threads to those newer than the specified time frame.

Allows you to choose the data by which the thread list will be sorted.

Order threads in...

Note: when sorting by date, 'descending order' will show the newest results first.

Icon Legend

Contains unread posts
Contains unread posts
Contains no unread posts
Contains no unread posts
More than 25 replies or 10000 views
Hot thread with unread posts
More than 25 replies or 10000 views
Hot thread with no unread posts
Closed Thread
Thread is closed
Thread Contains a Message Written By You
You have posted in this thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules