1. Announcement:
    InspectionNews Message Board Rules, Policies, and Disclaimers
    Brian Hannigan (Administrator)
    04-16-2007
    Views:
    1,989,105

Forum: Electrical Systems: Home Inspection and Commercial Inspection

Service Conductors, Panels, Overcurrent Protection Devices, Wiring Types and Methods, Switches, Receptacles, Light Fixtures ... For Home Inspections & Commercial Inspections

  1. Texas SOP-Appliance Grounding and Bonding

    Started by Joe Billman, 01-07-2009 06:53 AM
    2 Attachment(s)
    • Replies: 12
    • Views: 8,629
    Ted Menelly
    01-07-2009, 12:55 PM Go to last post

  2. 3-light circuit tester

    Started by Vern Heiler, 12-29-2008 10:48 AM
    8 Attachment(s)
    • Replies: 34
    • Views: 19,253
    Scott Patterson
    01-07-2009, 08:18 AM Go to last post

  3. Amperage on new house

    Started by Jim Robinson, 01-05-2009 04:43 PM
    5 Attachment(s)
    • Replies: 10
    • Views: 7,936
    Ron Bibler
    01-06-2009, 09:20 AM Go to last post

  4. Disconnect for wall oven

    Started by Michael Thomas, 01-05-2009 07:20 AM
    • Replies: 12
    • Views: 14,188
    Jerry Peck
    01-05-2009, 01:24 PM Go to last post

  5. Recall of Electrical Wiring How-to-Books by The Taunton Press

    Started by Michael Thomas, 01-04-2009 08:09 PM
    • Replies: 4
    • Views: 6,382
    Corn Walker
    01-05-2009, 01:10 PM Go to last post

  6. French Toast

    Started by Michael Greenwalt, 12-31-2008 10:01 AM
    • Replies: 0
    • Views: 4,406
    Michael Greenwalt
    12-31-2008, 10:01 AM Go to last post

  7. Discolored busbar

    Started by Richard Roshak, 12-29-2008 01:42 PM
    1 Attachment(s)
    • Replies: 12
    • Views: 11,763
    Ron Bibler
    12-30-2008, 05:26 PM Go to last post

  8. Individual service conductors

    Started by mathew stouffer, 12-29-2008 06:27 PM
    2 Attachment(s)
    • Replies: 6
    • Views: 4,206
    Matt Fellman
    12-29-2008, 09:34 PM Go to last post

  9. GFCI being used as a switch ???

    Started by Clint White, 12-27-2008 01:03 PM
    1 Attachment(s)
    • Replies: 30
    • Views: 17,572
    Jerry Peck
    12-29-2008, 03:49 PM Go to last post

  10. double pole breaker shunted?

    Started by Peter Wigle, 07-07-2008 05:17 PM
    2 Attachment(s)
    • Replies: 25
    • Views: 9,972
    Jack Feldmann
    12-26-2008, 05:21 AM Go to last post

  11. Box fill refresher

    Started by Jeff Remas, 12-22-2008 06:35 PM
    • Replies: 6
    • Views: 5,086
    Roland Miller
    12-23-2008, 07:25 AM Go to last post

  12. New smoke detector law - Texas

    Started by Jim Luttrall, 08-28-2007 03:44 PM
    • Replies: 10
    • Views: 38,052
    Ted Menelly
    12-18-2008, 08:09 PM Go to last post

  13. 14 AWG and 12 AWG wire splicing

    Started by Michael Vasquez, 12-15-2008 03:22 PM
    • Replies: 35
    • Views: 37,076
    Jeff Remas
    12-17-2008, 06:31 PM Go to last post

  14. You make the call AC circuit rating

    Started by Jeff Remas, 12-15-2008 06:20 PM
    2 Attachment(s)
    • Replies: 10
    • Views: 5,353
    Jim Robinson
    12-16-2008, 05:47 PM Go to last post

  15. Ideal Sure Test Circuit Analyzer - Upgrade for AFCI testing (breakers not tripping)

    Started by Charles Smith, 12-15-2008 04:44 PM
    • Replies: 6
    • Views: 13,194
    Jeff Remas
    12-16-2008, 03:00 PM Go to last post

  16. Service Connection

    Started by Stephen G Sheldon, 12-11-2008 10:08 AM
    5 Attachment(s)
    • Replies: 14
    • Views: 7,711
    Shannon Guinn
    12-15-2008, 06:42 AM Go to last post

  17. Service Connection

    Started by Stephen G Sheldon, 12-11-2008 10:05 AM
    6 Attachment(s)
    • Replies: 23
    • Views: 8,423
    John Steinke
    12-14-2008, 10:45 PM Go to last post

  18. 220 breaker from 2 110's?

    Started by Reis Pearson, 12-13-2008 08:27 AM
    1 Attachment(s)
    • Replies: 4
    • Views: 4,804
    JORY LANNES
    12-13-2008, 09:39 PM Go to last post

  19. Stumped

    Started by Ross Neag, 12-10-2008 08:33 PM
    3 Attachment(s)
    • Replies: 13
    • Views: 6,264
    Corey Friedman
    12-12-2008, 05:34 PM Go to last post

  20. 120V outlet required in a laundry room?

    Started by Matt Fellman, 12-10-2008 03:44 PM
    • Replies: 22
    • Views: 18,957
    Russel Ray
    12-12-2008, 12:22 PM Go to last post

  21. main breaker cu/al

    Started by John Arnold, 12-10-2008 10:45 AM
    1 Attachment(s)
    • Replies: 3
    • Views: 4,871
    John Arnold
    12-11-2008, 08:13 AM Go to last post

  22. 2nd Opinion Please on bonding

    Started by Terry Beck, 12-05-2008 05:47 PM
    3 Attachment(s)
    • Replies: 9
    • Views: 4,945
    Jerry Peck
    12-10-2008, 08:13 PM Go to last post

  23. Lighting Rod Ground wire

    Started by Wendell Swedberg, 12-09-2008 07:36 PM
    3 Attachment(s)
    • Replies: 7
    • Views: 7,036
    Raymond Wand
    12-10-2008, 01:50 PM Go to last post

  24. ceiling light

    Started by John Arnold, 12-10-2008 01:01 PM
    1 Attachment(s)
    • Replies: 0
    • Views: 3,643
    John Arnold
    12-10-2008, 01:01 PM Go to last post

  25. Nice looking ground connection

    Started by Rick Burkman, 12-05-2008 08:03 PM
    1 Attachment(s)
    • Replies: 16
    • Views: 7,737
    Jerry Peck
    12-10-2008, 07:18 AM Go to last post

  26. could use a tad more clearance

    Started by John Arnold, 12-08-2008 03:03 PM
    1 Attachment(s)
    • Replies: 20
    • Views: 7,853
    Ron Bibler
    12-09-2008, 07:13 PM Go to last post

  27. Here's something I came across on a panel replacement.

    Started by Marc M, 11-01-2008 08:13 AM
    8 Attachment(s)
    • Replies: 63
    • Views: 16,916
    Jerry Peck
    12-05-2008, 12:53 PM Go to last post

  28. Post NC building code panel to re-examine breaker rule - Statesville Record & Landmark

    Started by Brian Hannigan, 12-05-2008 04:23 AM
    • Replies: 0
    • Views: 3,765
    Brian Hannigan
    12-05-2008, 04:23 AM Go to last post

  29. bedrooms and afci protection

    Started by Matt Fellman, 12-02-2008 11:45 PM
    • Replies: 12
    • Views: 6,693
    A.D. Miller
    12-03-2008, 02:37 PM Go to last post

  30. My county

    Started by Matt Fellman, 10-14-2008 10:09 PM
    1 Attachment(s)
    • Replies: 19
    • Views: 7,049
    Shannon Guinn
    12-03-2008, 07:28 AM Go to last post

  31. E.C Sherman Co. Panel w/FPE breakers

    Started by Ken Amelin, 12-01-2008 03:06 PM
    3 Attachment(s)
    • Replies: 3
    • Views: 4,172
    Ken Amelin
    12-02-2008, 05:23 AM Go to last post

  32. Grounded and grounding difference?

    Started by Marc M, 11-23-2008 12:39 AM
    3 Attachment(s)
    • Replies: 34
    • Views: 25,385
    Rick Cantrell
    11-28-2008, 04:06 PM Go to last post

  33. Is this ground correct?

    Started by Marc M, 11-26-2008 04:49 PM
    • Replies: 9
    • Views: 6,495
    Jeff Remas
    11-28-2008, 06:32 AM Go to last post

  34. Sub fed from double tap on main lugs

    Started by Jim Ball, 11-21-2008 02:55 PM
    4 Attachment(s)
    • Replies: 15
    • Views: 13,783
    Jerry Peck
    11-27-2008, 11:33 AM Go to last post

  35. "Avoiding physical damage" to FWG (food disposer) cords and controls

    Started by Michael Thomas, 07-01-2008 09:32 AM
    3 Attachment(s)
    • Replies: 12
    • Views: 7,687
    Pete Rose
    11-26-2008, 10:48 PM Go to last post

  36. 2 AFCI questions

    Started by Jim Robinson, 11-15-2008 09:50 AM
    • Replies: 12
    • Views: 9,798
    Jerry Peck
    11-25-2008, 03:24 PM Go to last post

  37. Cool polarity tester

    Started by Paul Johnston, 11-24-2008 04:36 AM
    1 Attachment(s)
    • Replies: 6
    • Views: 4,853
    Shannon Guinn
    11-25-2008, 06:09 AM Go to last post

  38. What is ths?

    Started by Michael Thomas, 11-20-2008 01:27 PM
    2 Attachment(s)
    • Replies: 9
    • Views: 7,326
    Michael Thomas
    11-21-2008, 09:18 AM Go to last post

  39. why get an inspection?

    Started by Gary Smith, 09-17-2008 04:59 PM
    5 Attachment(s)
    • Replies: 19
    • Views: 6,510
    Ted Menelly
    11-19-2008, 06:59 PM Go to last post

  40. Receptacles on floor

    Started by Brian Robertson, 11-10-2008 10:04 AM
    3 Attachment(s)
    • Replies: 17
    • Views: 6,340
    Mike Schulz
    11-19-2008, 04:48 PM Go to last post

  41. Question Bulb to ceiling clearance

    Started by Trent Tarter, 11-02-2008 09:33 PM
    • Replies: 14
    • Views: 15,336
    Jeff Remas
    11-17-2008, 06:09 PM Go to last post

  42. How many things can you find wrong

    Started by Dylan Whitehead, 10-13-2008 11:39 AM
    6 Attachment(s)
    • Replies: 9
    • Views: 5,192
    Shannon Guinn
    11-14-2008, 06:31 AM Go to last post

  43. Water heater switch

    Started by Ken Bates, 11-04-2008 09:55 AM
    • Replies: 10
    • Views: 7,959
    Richard Stanley
    11-05-2008, 06:28 AM Go to last post

  44. what is the amperage for this house

    Started by CHARLIE VAN FLEET, 10-24-2008 01:14 PM
    2 Attachment(s)
    • Replies: 26
    • Views: 9,727
    Richard Hedrick
    11-03-2008, 10:11 PM Go to last post

  45. code requiring a 110-volt outlet in laundry area

    Started by Matt Fellman, 10-31-2008 10:56 AM
    • Replies: 4
    • Views: 6,605
    Matt Fellman
    10-31-2008, 10:44 PM Go to last post

  46. Please explain scorched nuetral.

    Started by Marc M, 10-29-2008 07:56 PM
    3 Attachment(s)
    • Replies: 20
    • Views: 8,004
    Gunnar Alquist
    10-30-2008, 09:08 PM Go to last post

  47. Help needed understanding panel

    Started by David OKeefe, 10-25-2008 02:26 PM
    6 Attachment(s)
    • Replies: 31
    • Views: 8,524
    John Allingham
    10-28-2008, 07:10 AM Go to last post

  48. Question Need help with sub panel wiring.

    Started by James Edwards, 10-23-2008 04:10 PM
    • Replies: 9
    • Views: 10,356
    Mike Schulz
    10-27-2008, 10:37 AM Go to last post

  49. Are oil lines allowed above electric panel?

    Started by Ken Amelin, 10-23-2008 10:32 AM
    1 Attachment(s)
    • Replies: 13
    • Views: 7,399
    Don Norman
    10-27-2008, 09:08 AM Go to last post

  50. ALUMINUM BRANCH WIRES RETURN

    Started by CHARLIE VAN FLEET, 10-21-2008 02:39 PM
    6 Attachment(s)
    • Replies: 4
    • Views: 4,414
    Ted Menelly
    10-21-2008, 04:03 PM Go to last post

  51. Need some advice on a project please :)

    Started by Jacob Sanchez, 10-15-2008 08:27 AM
    1 Attachment(s)
    • Replies: 45
    • Views: 9,674
    Jacob Sanchez
    10-20-2008, 05:45 PM Go to last post

  52. Question Won't an all AFCI Panel Get HOT !

    Started by Bob Sisson, 10-17-2008 04:52 AM
    1 Attachment(s)
    • Replies: 6
    • Views: 4,818
    Bob Sisson
    10-18-2008, 06:32 AM Go to last post

  53. How fry up some wires

    Started by mike huntzinger, 10-16-2008 06:07 PM
    2 Attachment(s)
    • Replies: 9
    • Views: 5,380
    mike huntzinger
    10-17-2008, 08:03 AM Go to last post

  54. Over Amped Panel?

    Started by Matthew Barnicle, 10-15-2008 10:52 AM
    • Replies: 2
    • Views: 4,421
    Matthew Barnicle
    10-15-2008, 12:41 PM Go to last post

  55. 1957 UPGRADED ELECTRICAL SERVICE

    Started by CHARLIE VAN FLEET, 10-08-2008 07:00 PM
    5 Attachment(s)
    • Replies: 13
    • Views: 7,399
    Matthew Barnicle
    10-15-2008, 11:01 AM Go to last post

  56. Splashy Splashy

    Started by Nick Ostrowski, 10-08-2008 06:43 AM
    2 Attachment(s)
    • Replies: 13
    • Views: 6,483
    John Steinke
    10-15-2008, 10:03 AM Go to last post

  57. TV above jet tub

    Started by Dave Hill, 10-14-2008 02:34 PM
    7 Attachment(s)
    • Replies: 24
    • Views: 14,598
    John Steinke
    10-15-2008, 09:44 AM Go to last post

  58. ground rod

    Started by Kevin Rutledge, 09-20-2008 12:46 PM
    • Replies: 6
    • Views: 5,428
    John Steinke
    10-15-2008, 08:57 AM Go to last post

  59. Voltage on grounding cable

    Started by Brian Robertson, 09-09-2008 11:39 AM
    1 Attachment(s)
    • Replies: 17
    • Views: 6,252
    John Steinke
    10-15-2008, 08:37 AM Go to last post

  60. Can anyone tell me what they think the size of this panel might be?

    Started by Marc M, 10-13-2008 01:20 PM
    • Replies: 6
    • Views: 4,799
    Marc M
    10-14-2008, 02:39 PM Go to last post

  61. FPE Stab-Lok double lugged 100-amp

    Started by Grant Harrod, 10-09-2008 10:32 PM
    2 Attachment(s)
    • Replies: 0
    • Views: 5,522
    Grant Harrod
    10-09-2008, 10:32 PM Go to last post

  62. GFCI outlet at jacuzzi tub

    Started by Jody Humbert, 10-01-2008 10:39 AM
    1 Attachment(s)
    • Replies: 7
    • Views: 13,000
    Jerry Peck
    10-02-2008, 10:04 AM Go to last post

  63. Honey where are my Shocks, I mean socks

    Started by wayne soper, 10-01-2008 09:38 AM
    2 Attachment(s)
    • Replies: 2
    • Views: 4,228
    Brent Crouse
    10-02-2008, 10:01 AM Go to last post

  64. Exclamation GFCI (kitchen/bath) - Max # of branch

    Started by Robert Alexander, 09-20-2008 06:01 AM
    • Replies: 36
    • Views: 12,755
    Jerry Peck
    09-30-2008, 05:29 PM Go to last post

  65. Unprotected cable from meter to SE enters exterior wall

    Started by Michael Thomas, 09-24-2008 12:08 PM
    3 Attachment(s)
    • Replies: 12
    • Views: 11,750
    Eric Barker
    09-26-2008, 06:33 PM Go to last post

  66. How does does this happen?

    Started by Marc M, 09-24-2008 09:09 PM
    • Replies: 1
    • Views: 4,303
    Markus Keller
    09-26-2008, 05:03 PM Go to last post

  67. 12 awg and 15 amp breaker-is this just overkill?

    Started by Marc M, 09-19-2008 07:28 PM
    • Replies: 23
    • Views: 25,597
    Jerry Peck
    09-26-2008, 04:49 PM Go to last post

  68. Hurricane Ike & Out of State Inspectors Notice

    Started by Wayne Carlisle, 09-26-2008 06:55 AM
    • Replies: 0
    • Views: 4,803
    Wayne Carlisle
    09-26-2008, 06:55 AM Go to last post

  69. Best knob and tube trick yet

    Started by Michael Thomas, 09-22-2008 03:46 PM
    3 Attachment(s)
    • Replies: 1
    • Views: 4,676
    Jim Luttrall
    09-22-2008, 04:13 PM Go to last post

  70. Service Riser/Lateral

    Started by Dan Blanchard, 09-21-2008 01:57 PM
    • Replies: 7
    • Views: 6,234
    Jerry Peck
    09-22-2008, 08:19 AM Go to last post

  71. Fixture/bath tub clearence

    Started by Steven Turetsky, 05-30-2008 11:25 PM
    3 Attachment(s)
    • Replies: 12
    • Views: 5,711
    Steven Turetsky
    09-19-2008, 05:40 PM Go to last post

  72. Question 240 volt double pole breakers

    Started by Trent Tarter, 09-18-2008 10:25 PM
    1 Attachment(s)
    • Replies: 7
    • Views: 8,454
    Eugene Cameline 3rd
    09-19-2008, 12:44 PM Go to last post

  73. Them copper wires

    Started by MaMa Mount, 09-17-2008 11:31 AM
    4 Attachment(s)
    • Replies: 11
    • Views: 5,652
    Stuart Brooks
    09-19-2008, 06:21 AM Go to last post

  74. Cutler-Hammer Clipper Power System (surge protector) inside a service panel

    Started by Tom Edwards, 09-17-2008 05:35 PM
    5 Attachment(s)
    • Replies: 15
    • Views: 11,733
    Jerry Peck
    09-18-2008, 10:20 AM Go to last post

  75. Separation between Breaker panel and hose bib?

    Started by Matthew Barnicle, 09-18-2008 10:13 AM
    • Replies: 1
    • Views: 6,103
    Jerry Peck
    09-18-2008, 10:16 AM Go to last post

Thread Display Options

Use this control to limit the display of threads to those newer than the specified time frame.

Allows you to choose the data by which the thread list will be sorted.

Order threads in...

Note: when sorting by date, 'descending order' will show the newest results first.

Icon Legend

Contains unread posts
Contains unread posts
Contains no unread posts
Contains no unread posts
More than 25 replies or 10000 views
Hot thread with unread posts
More than 25 replies or 10000 views
Hot thread with no unread posts
Closed Thread
Thread is closed
Thread Contains a Message Written By You
You have posted in this thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules