1. Announcement:
    InspectionNews Message Board Rules, Policies, and Disclaimers
    Brian Hannigan (Administrator)
    04-16-2007
    Views:
    89,616

Forum: Electrical Systems: Home Inspection and Commercial Inspection

Service Conductors, Panels, Overcurrent Protection Devices, Wiring Types and Methods, Switches, Receptacles, Light Fixtures ... For Home Inspections & Commercial Inspections

  1. water heater / dryer plug

    Started by Richard Stanley, 09-20-2007 12:10 PM
    4 Attachment(s)
    • Replies: 19
    • Views: 5,488
    JB Thompson
    09-22-2007, 02:26 PM Go to last post

  2. Question GFCI Trips

    Started by Aaron Miller, 09-19-2007 08:55 AM
    • Replies: 8
    • Views: 2,280
    Jerry Peck
    09-19-2007, 02:50 PM Go to last post

  3. Clamp needed?

    Started by Jeff Eastman, 09-15-2007 11:37 AM
    • Replies: 10
    • Views: 2,167
    Peter Plein
    09-18-2007, 06:31 PM Go to last post

  4. Guess who the owner is?

    Started by Peter Drougas, 09-15-2007 09:34 PM
    4 Attachment(s)
    • Replies: 2
    • Views: 1,905
    Claudia Lawrence
    09-18-2007, 10:00 AM Go to last post

  5. Main Service Entrance Panel

    Started by Tom Payne, 09-17-2007 02:51 PM
    1 Attachment(s)
    • Replies: 4
    • Views: 4,531
    Tom Payne
    09-17-2007, 05:29 PM Go to last post

  6. Question Energy Monitoring Products - What is it?

    Started by Brian Hannigan, 09-13-2007 09:39 AM
    1 Attachment(s)
    • Replies: 6
    • Views: 2,276
    TOM DEEHAN
    09-14-2007, 06:21 AM Go to last post

  7. Stacked Junction boxex

    Started by Jeff Eastman, 09-12-2007 02:00 PM
    2 Attachment(s)
    • Replies: 7
    • Views: 2,489
    Michael Thomas
    09-13-2007, 02:16 PM Go to last post

  8. Panel clearances

    Started by Jeff Eastman, 09-07-2007 11:48 AM
    1 Attachment(s)
    • Replies: 22
    • Views: 3,129
    Richard Rushing
    09-12-2007, 07:50 PM Go to last post

  9. Branch circuits

    Started by dan orourke, 09-08-2007 09:19 AM
    • Replies: 10
    • Views: 2,540
    RANDY NICHOLAS
    09-12-2007, 07:22 AM Go to last post

  10. Smoke alarm placement

    Started by dan orourke, 09-08-2007 09:32 AM
    5 Attachment(s)
    • Replies: 16
    • Views: 6,815
    Jerry McCarthy
    09-11-2007, 08:36 AM Go to last post

  11. Head Scratcher

    Started by Greg Frazier, 09-09-2007 09:56 AM
    • Replies: 5
    • Views: 1,759
    Greg Frazier
    09-11-2007, 08:23 AM Go to last post

  12. Electrical cable routing

    Started by RobertSmith, 09-08-2007 06:53 AM
    1 Attachment(s)
    • Replies: 4
    • Views: 3,589
    Jerry Peck
    09-09-2007, 07:56 AM Go to last post

  13. Spacers matter?

    Started by M Kelekci, 07-30-2007 06:44 PM
    • Replies: 22
    • Views: 2,590
    Jerry Peck
    09-08-2007, 07:07 PM Go to last post

  14. Elec box questions

    Started by Rick Maday, 09-07-2007 03:42 PM
    4 Attachment(s)
    • Replies: 3
    • Views: 1,389
    Jimmy Bacco
    09-08-2007, 10:30 AM Go to last post

  15. Thumbs up Nice job

    Started by Frank Bombardiere, 09-05-2007 04:21 PM
    1 Attachment(s)
    • Replies: 5
    • Views: 1,912
    Jerry Peck
    09-07-2007, 03:29 PM Go to last post

  16. AFCIs

    Started by David Banks, 09-07-2007 11:28 AM
    • Replies: 0
    • Views: 1,356
    David Banks
    09-07-2007, 11:28 AM Go to last post

  17. Any probs with panel used as junction box?

    Started by Ross Neag, 09-05-2007 05:49 PM
    3 Attachment(s)
    • Replies: 1
    • Views: 1,737
    Jerry Peck
    09-05-2007, 05:55 PM Go to last post

  18. Help, suggestions, comments

    Started by Victor DaGraca, 09-02-2007 08:06 AM
    5 Attachment(s)
    • Replies: 9
    • Views: 2,995
    Jerry Peck
    09-03-2007, 03:30 PM Go to last post

  19. Surface Mounted SE Recessed

    Started by john thurmond, 08-23-2007 11:13 AM
    4 Attachment(s)
    • Replies: 9
    • Views: 2,681
    john thurmond
    09-01-2007, 05:47 PM Go to last post

  20. clarification

    Started by Thom Walker, 08-31-2007 08:36 PM
    1 Attachment(s)
    • Replies: 1
    • Views: 1,535
    Jerry Peck
    08-31-2007, 09:08 PM Go to last post

  21. Could not locate the circuit breaker panel.

    Started by M Kelekci, 08-17-2007 11:57 AM
    • Replies: 11
    • Views: 6,048
    Jerry Peck
    08-30-2007, 07:01 PM Go to last post

  22. Ground wire cannot go through meter base?

    Started by Barry Grubb, 08-27-2007 01:48 PM
    • Replies: 2
    • Views: 17,522
    Philip Desmarais
    08-27-2007, 09:02 PM Go to last post

  23. Service Disconnect question

    Started by william siegel, 08-27-2007 02:00 PM
    3 Attachment(s)
    • Replies: 3
    • Views: 1,702
    Jerry Peck
    08-27-2007, 04:56 PM Go to last post

  24. Sticky labels on GEC

    Started by dan orourke, 08-19-2007 10:45 AM
    • Replies: 26
    • Views: 2,861
    Aaron Miller
    08-24-2007, 01:16 PM Go to last post

  25. Bryant Breakers in Sylvania panel

    Started by Jim Luttrall, 08-22-2007 06:40 PM
    8 Attachment(s)
    • Replies: 22
    • Views: 10,287
    Jerry Peck
    08-24-2007, 12:32 PM Go to last post

  26. Sears Panel

    Started by David Banks, 08-22-2007 01:08 PM
    1 Attachment(s)
    • Replies: 1
    • Views: 2,008
    Gunnar Alquist
    08-22-2007, 02:01 PM Go to last post

  27. A/c piping in electrical chase

    Started by allen elliott, 08-16-2007 05:08 PM
    1 Attachment(s)
    • Replies: 3
    • Views: 5,152
    Jerry Peck
    08-22-2007, 12:11 PM Go to last post

  28. Cool Arcing Condition

    Started by Joe Nernberg, 08-20-2007 10:20 PM
    1 Attachment(s)
    • Replies: 2
    • Views: 1,854
    Don Matthews
    08-21-2007, 12:55 PM Go to last post

  29. Paint contaminated Panel

    Started by Bob Sisson, 08-19-2007 06:49 PM
    3 Attachment(s)
    • Replies: 7
    • Views: 2,253
    Eric Van De Ven
    08-20-2007, 07:26 AM Go to last post

  30. Stairway lighing

    Started by RobertSmith, 08-19-2007 08:57 AM
    • Replies: 2
    • Views: 1,828
    Jerry Peck
    08-19-2007, 12:47 PM Go to last post

  31. Satellite dish bonding

    Started by dan orourke, 08-19-2007 10:16 AM
    • Replies: 1
    • Views: 4,389
    David Banks
    08-19-2007, 10:58 AM Go to last post

  32. Question 2 hot 240 leads

    Started by Anthony Alderman, 08-17-2007 12:24 PM
    • Replies: 10
    • Views: 2,221
    Jerry Peck
    08-18-2007, 06:15 AM Go to last post

  33. Should panel be flush?

    Started by M Kelekci, 08-17-2007 11:06 AM
    • Replies: 1
    • Views: 1,515
    Matt Fellman
    08-17-2007, 11:30 AM Go to last post

  34. Don't underestimate mice

    Started by Joe Griffin, 08-12-2007 07:16 AM
    • Replies: 4
    • Views: 2,403
    Barry Grubb
    08-16-2007, 12:07 PM Go to last post

  35. Mystery...

    Started by Ron Bishop, 08-15-2007 05:01 PM
    1 Attachment(s)
    • Replies: 5
    • Views: 2,369
    Michael Thomas
    08-15-2007, 05:27 PM Go to last post

  36. GFCI ahead of bathroom fixture

    Started by Michael Thomas, 08-08-2007 06:08 PM
    1 Attachment(s)
    • Replies: 20
    • Views: 3,394
    Jerry Peck
    08-15-2007, 12:02 PM Go to last post

  37. Disposals

    Started by Richard Roshak, 08-04-2007 03:36 PM
    • Replies: 12
    • Views: 2,546
    Corey Friedman
    08-13-2007, 04:06 PM Go to last post

  38. High Line Power Wires

    Started by Rick Hurst, 06-05-2007 11:07 AM
    3 Attachment(s)
    • Replies: 1
    • Views: 3,873
    Ron Gries
    08-13-2007, 11:35 AM Go to last post

  39. 70amp panel

    Started by Jeff Eastman, 08-04-2007 03:50 PM
    • Replies: 7
    • Views: 2,372
    Jerry Peck
    08-10-2007, 04:24 PM Go to last post

  40. Low voltage lighting.

    Started by Trent Tarter, 08-07-2007 07:27 PM
    2 Attachment(s)
    • Replies: 8
    • Views: 2,949
    John Steinke
    08-10-2007, 04:01 PM Go to last post

  41. afci 2008

    Started by Richard Stanley, 08-10-2007 08:40 AM
    • Replies: 0
    • Views: 1,997
    Richard Stanley
    08-10-2007, 08:40 AM Go to last post

  42. What is this?

    Started by M Kelekci, 08-08-2007 01:33 PM
    1 Attachment(s)
    • Replies: 2
    • Views: 1,657
    wayne soper
    08-08-2007, 05:56 PM Go to last post

  43. Rainbow effect in a newer panel

    Started by Matt Fellman, 08-07-2007 06:20 PM
    2 Attachment(s)
    • Replies: 3
    • Views: 1,787
    Matt Fellman
    08-07-2007, 06:42 PM Go to last post

  44. Service conduit bonding at service equipment

    Started by Michael Thomas, 08-07-2007 05:59 AM
    • Replies: 0
    • Views: 2,853
    Michael Thomas
    08-07-2007, 05:59 AM Go to last post

  45. Question WIRE NUTS / SPLICES IN CIRCUIT PANEL

    Started by Mike Brewer, 08-06-2007 08:58 AM
    • Replies: 6
    • Views: 13,208
    Jerry Peck
    08-07-2007, 05:13 AM Go to last post

  46. brain melt

    Started by Jeff Eastman, 08-04-2007 06:28 PM
    2 Attachment(s)
    • Replies: 7
    • Views: 2,002
    Jerry Peck
    08-05-2007, 02:21 PM Go to last post

  47. Bonding to panel

    Started by Jeff Eastman, 08-05-2007 07:53 AM
    • Replies: 5
    • Views: 1,849
    Michael Thomas
    08-05-2007, 12:10 PM Go to last post

  48. electrical question

    Started by Elliott Taylor, 08-03-2007 02:47 PM
    4 Attachment(s)
    • Replies: 8
    • Views: 1,876
    Jerry Peck
    08-04-2007, 08:34 AM Go to last post

  49. FPE Stab-Lok Panel and Aluminum Wire

    Started by Chris Skoczylas, 07-27-2007 05:52 PM
    2 Attachment(s)
    • Replies: 20
    • Views: 7,028
    Jerry Peck
    08-03-2007, 05:57 PM Go to last post

  50. AFCIs???

    Started by Tim Moreira, 08-02-2007 11:12 PM
    • Replies: 3
    • Views: 1,718
    Jerry Peck
    08-03-2007, 08:51 AM Go to last post

  51. Service Panel

    Started by David Banks, 07-31-2007 04:15 AM
    1 Attachment(s)
    • Replies: 42
    • Views: 4,019
    Joe Tedesco
    08-03-2007, 08:27 AM Go to last post

  52. Exclamation Lead Covered Conduit?

    Started by PETER W BENNETT, 08-02-2007 03:33 PM
    1 Attachment(s)
    • Replies: 2
    • Views: 1,636
    Jerry Peck
    08-02-2007, 05:27 PM Go to last post

  53. GFCI Requirements

    Started by Erol Kartal, 08-01-2007 02:04 PM
    1 Attachment(s)
    • Replies: 3
    • Views: 3,521
    Scott Patterson
    08-01-2007, 02:33 PM Go to last post

  54. Wiring looks likes like a snake nest!

    Started by Phillip Stojanik, 07-31-2007 12:58 PM
    1 Attachment(s)
    • Replies: 6
    • Views: 2,267
    BARRY ADAIR
    08-01-2007, 03:24 AM Go to last post

  55. Oversized wiring

    Started by Doug Mossing, 07-30-2007 06:27 PM
    • Replies: 3
    • Views: 4,765
    Richard Rushing
    07-30-2007, 08:16 PM Go to last post

  56. Proposed AFCI requirements-- discussion

    Started by Richard Rushing, 07-28-2007 09:53 AM
    • Replies: 7
    • Views: 2,791
    Jerry Peck
    07-30-2007, 07:25 AM Go to last post

  57. Smile Vintage Electrical Advertisements

    Started by Joe Tedesco, 07-29-2007 08:37 PM
    1 Attachment(s)
    • Replies: 1
    • Views: 1,681
    Bruce Breedlove
    07-29-2007, 08:53 PM Go to last post

  58. Receptacle-cook top clearence requirement.

    Started by M Kelekci, 07-23-2007 06:23 PM
    1 Attachment(s)
    • Replies: 3
    • Views: 2,027
    Trent Tarter
    07-28-2007, 10:26 PM Go to last post

  59. plug adapters

    Started by Jeff Eastman, 07-27-2007 05:32 PM
    • Replies: 8
    • Views: 2,234
    Philip Desmarais
    07-28-2007, 06:05 PM Go to last post

  60. Electric Panel - Ground Wire location

    Started by Ken Amelin, 07-28-2007 11:11 AM
    2 Attachment(s)
    • Replies: 1
    • Views: 2,874
    Jerry Peck
    07-28-2007, 04:12 PM Go to last post

  61. 1950s home

    Started by dan orourke, 07-19-2007 08:04 PM
    • Replies: 11
    • Views: 2,250
    Richard Rushing
    07-28-2007, 10:01 AM Go to last post

  62. Got really lucky last night

    Started by Joe Griffin, 07-25-2007 04:22 PM
    • Replies: 10
    • Views: 2,333
    John Steinke
    07-28-2007, 09:31 AM Go to last post

  63. Overheat?

    Started by Clay E White, 07-26-2007 03:57 PM
    • Replies: 3
    • Views: 1,370
    John Steinke
    07-28-2007, 09:26 AM Go to last post

  64. Cartridge style fuse size

    Started by Michael Thomas, 07-27-2007 09:57 AM
    1 Attachment(s)
    • Replies: 4
    • Views: 1,775
    Michael Thomas
    07-27-2007, 05:19 PM Go to last post

  65. Need help with fuse panel.

    Started by elwood pleebis, 07-26-2007 10:35 AM
    • Replies: 8
    • Views: 2,186
    elwood pleebis
    07-27-2007, 08:36 AM Go to last post

  66. Splicing new to old

    Started by David Macy, 07-26-2007 12:05 PM
    5 Attachment(s)
    • Replies: 7
    • Views: 2,160
    Jon Randolph
    07-27-2007, 03:20 AM Go to last post

  67. Two buildings become one

    Started by Terry Beck, 07-25-2007 08:52 PM
    1 Attachment(s)
    • Replies: 2
    • Views: 1,683
    Jerry Peck
    07-26-2007, 05:47 AM Go to last post

  68. Question Service panel conversion

    Started by Trent Tarter, 07-24-2007 07:37 PM
    1 Attachment(s)
    • Replies: 2
    • Views: 2,111
    Trent Tarter
    07-24-2007, 08:51 PM Go to last post

  69. Double Taps

    Started by wayne soper, 06-09-2007 05:33 AM
    4 Attachment(s)
    • Replies: 7
    • Views: 2,605
    Phillip Stojanik
    07-24-2007, 12:39 AM Go to last post

  70. Load side panel close to service equipment

    Started by Michael Thomas, 07-23-2007 05:51 PM
    4 Attachment(s)
    • Replies: 3
    • Views: 1,956
    Phillip Stojanik
    07-23-2007, 08:39 PM Go to last post

  71. Question Distribution Panels

    Started by Chip O'Brian, 06-05-2007 12:52 PM
    3 Attachment(s)
    • Replies: 5
    • Views: 2,381
    Michael Thomas
    07-23-2007, 05:34 PM Go to last post

  72. Electrical cables contacting each other

    Started by Scott Lynch, 07-20-2007 12:08 PM
    • Replies: 2
    • Views: 1,620
    Jerry Peck
    07-20-2007, 03:07 PM Go to last post

  73. Overthinking?

    Started by dan orourke, 07-19-2007 03:52 PM
    • Replies: 5
    • Views: 1,726
    Jerry Peck
    07-20-2007, 03:04 PM Go to last post

  74. "Type of Branch Circuit Wiring" - Texas

    Started by RobertSmith, 07-07-2007 07:11 AM
    • Replies: 5
    • Views: 4,769
    Jimmy Breazeale
    07-19-2007, 08:21 PM Go to last post

  75. Aluminum wiring pigtails in the IRC?

    Started by Eric Laney, 07-18-2007 05:42 PM
    • Replies: 2
    • Views: 2,826
    Matt Fellman
    07-18-2007, 11:16 PM Go to last post

Thread Display Options

Use this control to limit the display of threads to those newer than the specified time frame.

Allows you to choose the data by which the thread list will be sorted.

Order threads in...

Note: when sorting by date, 'descending order' will show the newest results first.

Icon Legend

Contains unread posts
Contains unread posts
Contains no unread posts
Contains no unread posts
More than 25 replies or 10000 views
Hot thread with unread posts
More than 25 replies or 10000 views
Hot thread with no unread posts
Closed Thread
Thread is closed
Thread Contains a Message Written By You
You have posted in this thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules