Results 1 to 4 of 4
  1. #1
    Ron Bibler's Avatar
    Ron Bibler Guest

    Default Can you help with this panel ?

    I think this guy has just about over stuff every hole. L.O.L.

    What a mess

    And then to top it off this panel is 30 feet below ground with an under ground service. The main is at the top of the driveway some 100 feet away with a Zinsco 200amp Main on the side of a pole...

    Best

    Ron

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Last edited by Ron Bibler; 02-20-2009 at 10:06 PM.
    Member Benefits1

  2. #2
    Join Date
    Aug 2007
    Location
    Memphis TN.
    Posts
    4,311

    Default Re: Can you help with this panel ?

    Thread title: Can you help with this panel?

    Ron,

    Here You Go.
    .

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    It Might have Choked Artie But it ain't gone'a choke Stymie! Our Gang " The Pooch " (1932)
    Billy J. Stephens HI Service Memphis TN.

  3. #3
    Join Date
    Mar 2007
    Location
    Oregon
    Posts
    2,365

    Default Re: Can you help with this panel ?

    I agree with Billy....

    As for the specifics, I'll wait the others to chime in. In general, that looks like either a newer Zinsco or a total rewire (done by Billy Bob homeowner, I'm sure).

    I don't see any cables older than about 1970's. Most Zinsco panels I see are from the 50's or early 60's but I did run across one that I think was in the mid to late 70's.


  4. #4
    A.D. Miller's Avatar
    A.D. Miller Guest

    Default Re: Can you help with this panel ?

    Quote Originally Posted by Ron Bibler View Post
    I think this guy has just about over stuff every hole. L.O.L.

    What a mess

    And then to top it off this panel is 30 feet below ground with an under ground service. The main is at the top of the driveway some 100 feet away with a Zinsco 200amp Main on the side of a pole...

    Best

    Ron
    Ron: It is a Zinsco which is a true mess, and a shame. Why go to all that trouble to rewire an arc welder in a box.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •