Thread: Laminate Floor Inspection in Alto, NM 88312

We have a need for a laminate floor inspection in Alto, NM 88312. No destructive testing involved. We will provide a checklist of what to look for and what questions to ask. A moisture meter is required. If you do not have one, we will send one to you (payment will not be made until we receive the moisture meter back; we will pay the shipping). No destructive testing required. The nspection should only take 10-15 minutes. Clear, quality digital pictures are required.

If you accept bankcards, we can pay immediatley after the inspection. If not, we can pay by check 10-14 days after the completion.

Contact Ron Gould (rgould@inspectsolutions.com) or Scott Heath (sheath@inspectsolutions.com) at Inspect Solutions, Inc. (888) 854-0946

Please refer to ID: 50017

Similar Threads:

• Checking for asbestos floor tiles not easy - Mortage 101
• Floor Covering Required?
• No slope to floor drain, 2nd story.
• wall/floor cracks
• CPSC Recall: Floor Electrical Outlets

We have this one covered.