Results 1 to 1 of 1
  1. #1

    Default Article: To test or not to test? Examining the garage door pressure test | Part 2

    Hi, InspectionNews Readers!

    This is Aubri Devashrayee from InspectorPro Insurance. You've probably heard of @Stephanie Jaynes from InspectorPro - I'm her assistant! I look forward to interacting with you all and getting to know you better.

    The following is an excerpt from Part 2 of our Garage Door Pressure Test 2-part series. In this article, we find out what inspectors have to say about testing the reverse jam function on garage doors. You can catch Stephanie's post about Part one of the series in her most recent thread post.




    In Part 1 of the series, we examined how the two nationally recognized Standards of Practice (SoPs), written by the American Society of Home Inspectors' (ASHI) and the International Association of Certified Home Inspectors' (InterNACHI), address the reverse jam test of garage doors. Both SoPs state that home inspectors are not required to conduct the performance test. And yet, whether inspectors wish to not perform the test as both the ASHI and the InterNACHI SoPs give them the right to is a complicated question.

    In this article, we aim to explore that question further. We interviewed several experienced home inspectors to see how they address the three primary pressure testing concerns explained previously:

    1. For one thing, there are two primary ways to perform the reverse jam test - with a two-by-four and with your hands - and inspectors and subject matter experts vehemently disagree on which technique is superior.
    2. For another, some industry professionals question whether the performance test is, in fact, an accurate predictor of safety or if it, in fact, gives clients a false sense of security.
    3. Lastly, as we shared in our article Top 5 General Liability Claims Against Home Inspectors, inspectors take on increased liability when they perform the reverse jam test, as virtually every garage door-related claim we've seen results from the test.[i]

    As indicated in Part 1, home inspectors fiercely favor one of three approaches to testing the reverse jam function of garage doors:

    • Testing with a two-by-four.
    • Testing with their hands.
    • Not testing at all.

    We explore the pros and cons of all three approaches in our article.


    Similar Threads:
    Last edited by Aubri Devashrayee; 02-03-2020 at 03:28 PM. Reason: Changed em dashes and apostrophes from question marks.
    Inspection Referral

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts