Results 1 to 18 of 18
  1. #1
    Join Date
    Mar 2007
    Location
    Knoxville, TN
    Posts
    2,560

    Default "I got it on this end Bud!!!"

    OREP Insurance

  2. #2
    Join Date
    Mar 2007
    Location
    Myrtle Beach, South Carolina
    Posts
    341

    Default Re: "I got it on this end Bud!!!"

    One tequila, two tequila, three tequila, floor.........


  3. #3
    Richard Moore's Avatar
    Richard Moore Guest

    Default Re: "I got it on this end Bud!!!"

    Tennessee: Where men are men, and sod is labelled "Green Side Up".

    You find wwaayy too many of these Jack. Keep 'em coming.


  4. #4
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: "I got it on this end Bud!!!"

    Now Jack, there you go again.

    You know the right side is for gravity load and the left side is for uplift.

    Didn't you remember anything from that class?



    Yep - "green side up".

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  5. #5
    Tim Moreira's Avatar
    Tim Moreira Guest

    Default Re: "I got it on this end Bud!!!"

    Is that a hanger or a holder?


  6. #6
    Join Date
    Mar 2007
    Location
    Connecticut
    Posts
    1,828

    Default Re: "I got it on this end Bud!!!"

    Oh Man, I needed that, good laugh.


  7. #7
    Join Date
    Oct 2003
    Location
    Rockwall Texas
    Posts
    4,521

    Talking Re: "I got it on this end Bud!!!"

    Jack,

    Your photoshop skills are getting great.


  8. #8
    Bob Mayer's Avatar
    Bob Mayer Guest

    Default Re: "I got it on this end Bud!!!"

    Are the joists on the left side cantalevered? If so, the positioning of the hangers might be correct.

    - BOB


  9. #9
    Join Date
    Mar 2007
    Location
    Corpus Christi, TX
    Posts
    615

    Default Re: "I got it on this end Bud!!!"

    Bob,

    Please explain why you think so.

    The only reason some people get lost in thought is because it's unfamiliar territory.
    - Paul Fix

  10. #10
    Richard Rushing's Avatar
    Richard Rushing Guest

    Default Re: "I got it on this end Bud!!!"

    Jack,

    That picture is gold. Thanks for sharing, I needed a good end to the day!

    Rich


  11. #11
    Bob Mayer's Avatar
    Bob Mayer Guest

    Default Re: "I got it on this end Bud!!!"

    Quote Originally Posted by Thom Walker View Post
    Bob,

    Please explain why you think so.
    I only have a moment, so this might not be clear.

    If the joists on the left are cantilevered, the right end of the left joists are themselves supports. The beam could be supported by those ends. Depending on how else the beam is supported I can see that either the beam is supporting the joists or that the joists are supporting the beam.

    - BOB


  12. #12
    Join Date
    Mar 2007
    Location
    Chicago, IL
    Posts
    2,797

    Default Re: "I got it on this end Bud!!!"

    Either way, it begs the question of why the three joists at the left rear have no hangers at all...


  13. #13
    Join Date
    Mar 2007
    Location
    Knoxville, TN
    Posts
    2,560

    Default Re: "I got it on this end Bud!!!"

    This deck had more issues than just those upside down hangers. This thing had a steel beam configuration under it that also needed a look at - I used the engineer card on this one.

    On the open end of the beam there are four holes and signs there was a post attached at one point. I have a feeling it was removed when it was discovered they could not pull a car into the garage, and the "that'll do OK" mentality fell into place.

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images

  14. #14
    Join Date
    Mar 2007
    Location
    Near Philly, Pa.
    Posts
    1,682

    Talking Re: "I got it on this end Bud!!!"

    There's nothing wrong with this--photo taken upside down!!!

    Keep the fire in the fireplace.

  15. #15
    Bob Mayer's Avatar
    Bob Mayer Guest

    Default Re: "I got it on this end Bud!!!"

    Quote Originally Posted by Michael Thomas View Post
    Either way, it begs the question of why the three joists at the left rear have no hangers at all...
    Perhaps because the steel beam underneath provides enough support for both the joists and the beam?

    In my posts in this thread I am not saying that what is in the photograph is right, I am saying that what we see might be right.

    Of those three joists Michael mentions, why was the middle one installed at all? There is a lot that we cannot tell from the photograph.

    - BOB


  16. #16
    Dave Mortensen's Avatar
    Dave Mortensen Guest

    Default Re: "I got it on this end Bud!!!"

    Contractors do this all the time for cantilered joists, installing the hanger the other way might support the joist for the span portion somewhat, but the cantilevered portion has all the uplift when people are on the deck. Usually the span portion is end nailed to withstand any downward force, which is what we all did prior to metal joist hangers anyway. I can't really tell why all of the cantilevered joists are not installed this way. David


  17. #17
    Join Date
    Mar 2007
    Location
    Healdsburg, CA
    Posts
    1,741

    Cool Re: "I got it on this end Bud!!!"

    Jack
    There's nothing wrong with that installation as we always did it that way whenever we installed joist crown down.


    Jerry McCarthy
    Building Code/ Construction Consultant

  18. #18
    Join Date
    Mar 2007
    Location
    Knoxville, TN
    Posts
    2,560

    Default Re: "I got it on this end Bud!!!"

    The hangers were right side up on the other end of the joists.

    Maybe only half the joist was crowned? Ya think??


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •