Results 1 to 4 of 4
  1. #1
    Join Date
    Mar 2007
    Location
    Colorado Springs, CO
    Posts
    1,217

    Default Prefab Fireplace Clearances

    What are the required clearances from this prefab Majestic M28 fireplace with gas logs to combustibles? I am especially interested in the clearances to the side and above the fireplace.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Last edited by Bruce Breedlove; 05-26-2007 at 10:34 AM.
    Crawl Space Creeper
    "Baseball is like church. Many attend but few understand." Leo Durocher
    Bruce Breedlove
    www.avaloninspection.com

  2. #2
    Join Date
    Mar 2007
    Location
    Lake Barrington, IL
    Posts
    1,367

    Default Re: Prefab Fireplace Clearances

    Bruce, I don't have answer to your question. But I'll raise another one. Does the firebox have vent louvers that are covered up?

    Eric Barker, ACI
    Lake Barrington, IL

  3. #3
    Join Date
    Mar 2007
    Location
    Colorado Springs, CO
    Posts
    1,217

    Default Re: Prefab Fireplace Clearances

    Eric,

    Not to my knowledge.

    "Baseball is like church. Many attend but few understand." Leo Durocher
    Bruce Breedlove
    www.avaloninspection.com

  4. #4
    Join Date
    Mar 2007
    Location
    Near Philly, Pa.
    Posts
    1,682

    Cool Re: Prefab Fireplace Clearances

    You need the listed installation instructions that came with this Fp. That will state the clearances. Even if this model is still in current production, you would need the manual that applies to this model Fp based upon when it was built. Majestic's Technical Services leaves a lot to be desired but you may luck out and get what you need from them.

    Never try to apply general stds. to factory built Fps. There are some units out there with radically different clearances from "the norm".

    Eric raises a great point: if there are louvers as for a circulating fireplace, these cannot be blocked. Also, how did they treat the spark strip and gap to the floor? I don't see any Micore or similar insulating board under that stone hearth extension.

    Keep the fire in the fireplace.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •