Results 1 to 3 of 3
-
09-17-2012, 05:27 PM #1
Chimney build - anyone have a problem with this?
I don't know that I have a problem with it...but I've never seen one built like this before.
From here, the chimney passes through the roof decking and is about 5-6 ft higher than the decking. Unfortunately, I was not able to climb that portion of the roof to be able to examine the chimney up close.
Similar Threads:Last edited by JB Thompson; 09-17-2012 at 06:30 PM.
Bruce Thompson, Lic. #9199
www.TylerHomeInspector.com
Home Inspections in the Tyler and East Texas area
-
09-17-2012, 06:49 PM #2
Re: Chimney build - anyone have a problem with this?
I'm thinking those flue tiles look like Isokern and were not made for that, but ...
... as I was searching trying to remember the spelling of Isokern, I found this: http://earthcore.co/images/manuals/2...dardFL-Web.pdf - see page 4 and page 28 (page 28 shows a "brick ledge"). Also shown on pages 36 and 37, maybe other pages too.
Last edited by Jerry Peck; 09-17-2012 at 07:04 PM. Reason: page 28 (page 38 shows ... should have been: page 28 (page 28 shows
-
09-17-2012, 06:55 PM #3
Re: Chimney build - anyone have a problem with this?
It pays to know people who know things
Thanks!
Bruce Thompson, Lic. #9199
www.TylerHomeInspector.com
Home Inspections in the Tyler and East Texas area
Bookmarks