Results 1 to 4 of 4
Thread: flue clearance and installation
-
05-13-2008, 05:53 PM #1
flue clearance and installation
see any problem with the flue height etc on this roof.
Noted this Bvent should be 1" to combustables as well right?
Similar Threads:
-
05-13-2008, 06:11 PM #2
-
05-13-2008, 06:44 PM #3
Re: flue clearance and installation
Not counting the sloped roof, but referring to the wall nearby, right?
Each slope roof has a minimum height above it, I believe it starts at 1 foot.
Now, if that wall is within 8 feet, the gas vent needs to be 2 feet higher than the wall/roof at the wall.
Of course, they are also supposed to be vertical too (just not sure how far off vertical is allowed where it comes out above the roof).
-
05-13-2008, 07:00 PM #4
Bookmarks