Flue Clearance to Openings (Pellet Stove) - InspectionNews

Ian Currie · #1 (**permalink**) 04-06-2009, 10:02 AM

I came across a photo of a flue from a pellet stove terminating horizontally, from a wall (about three horizontal feet away from the wall, six feet off the ground, but between an operable window and door).

Does anyone know the specifics regarding flue termination requirements for pellet burning stoves?

Note: As some of you may already know, I'm new to this site and to the world of home inspections, so please forgive my ignorance in advance . . . I am not a home inspector but am slowly working towards that.

Thanks!

Ian

wayne soper · #2 (**permalink**) 04-06-2009, 10:07 AM

Termination has to be 2 feet above any part of the building within 10 feet.
Unless the unit is listed otherwise but you would have to contact the company for that info.

Jim Robinson · #3 (**permalink**) 04-06-2009, 10:20 AM

Pellet stoves have some surprisingly close allowances for clearance. You'll need to find the manufacturer's installation instructions either at the house or on the web. They usually are allowed to vent horizontally.