Results 1 to 6 of 6
  1. #1
    Join Date
    Mar 2007
    Location
    Colorado Springs, CO
    Posts
    1,217

    Default InspectionNews Time Stamp

    The time stamp for messages on the board seems to be off by one hour. For example, I will post this message at 11:30 PM MST but the time stamp for it will read 10:30 PM.

    I have confirmed my settings (Mountain Time - Auto Detect Daylight Saving Time).

    Brian, Am I doing something wrong or is your server clock off by an hour?

    Is anyone else experiencing the same problem? (i.e., if you are in Eastern Time does the time stamp read 12:30 AM?)

    Similar Threads:
    F.I.R.E. Services
    "Baseball is like church. Many attend but few understand." Leo Durocher
    Bruce Breedlove
    www.avaloninspection.com

  2. #2
    Join Date
    Aug 2007
    Location
    Memphis TN.
    Posts
    4,311

    Default Re: InspectionNews Time Stamp

    Bruce,

    Central Time is correct.

    It Might have Choked Artie But it ain't gone'a choke Stymie! Our Gang " The Pooch " (1932)
    Billy J. Stephens HI Service Memphis TN.

  3. #3
    Join Date
    Mar 2007
    Location
    Capistrano Beach, CA
    Posts
    1,416

    Default Re: InspectionNews Time Stamp

    Near the bottom of the page right under the FREA banner is the board time.

    Currently the time says:
    All times are GMT -7. The time now is 09:12 AM.

    My computer time says 9:12am

    Normally here on the west coast it is -8 but I believe that because of the auto detect of DST it is -7.

    This year the dates of the time change have been changed so I wouldn't be surprised if the times are off by an hour at that point for a while.


    See InspectionNews' Secret To Getting More Inspections

    -----------------
    Sincerely,
    Brian Hannigan
    InspectionNews.net / InspectionReferral.com
    Helping Inspectors $ucceed Since 1997TM

    Facebook: https://www.facebook.com/InspectionNews
    Twitter: @InspectionNews

  4. #4
    Join Date
    Mar 2007
    Location
    Colorado Springs, CO
    Posts
    1,217

    Default Re: InspectionNews Time Stamp

    The current time is 12:52 PM, the time on my computer is 12:52 PM and the board time is:

    All times are GMT -7. The time now is 11:52 AM.

    I will check the time on another computer and see if the time continues to off by one hour.

    "Baseball is like church. Many attend but few understand." Leo Durocher
    Bruce Breedlove
    www.avaloninspection.com

  5. #5
    Join Date
    Mar 2007
    Location
    Capistrano Beach, CA
    Posts
    1,416

    Default Re: InspectionNews Time Stamp

    If it continues to be an issue you can go to "Quick Links" -> "Edit Options" and change your " Date & Time Options"

    Hope that helps.

    See InspectionNews' Secret To Getting More Inspections

    -----------------
    Sincerely,
    Brian Hannigan
    InspectionNews.net / InspectionReferral.com
    Helping Inspectors $ucceed Since 1997TM

    Facebook: https://www.facebook.com/InspectionNews
    Twitter: @InspectionNews

  6. #6
    Join Date
    Mar 2007
    Location
    Colorado Springs, CO
    Posts
    1,217

    Default Re: InspectionNews Time Stamp

    I found the problem. My bad. I had the time set correctly on my computer but I had the wrong time zone. (Somehow it was set to Pacific Time.) I Changed the time zone to Mountain Time and that seems to have fixed everything.

    "Baseball is like church. Many attend but few understand." Leo Durocher
    Bruce Breedlove
    www.avaloninspection.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •