Results 1 to 23 of 23

Thread: editing

  1. #1
    Join Date
    Mar 2007
    Location
    Ormond Beach, Florida
    Posts
    25,304

    Default editing

    A problem just started happening today ...

    When I click on 'Edit', I get an error message, I click 'OK' and my Microsoft Internet Explorer browser closes.

    ????????

    Similar Threads:
    Jerry Peck, Construction / Litigation Consultant
    Construction Litigation Consultants, LLC ( www.ConstructionLitigationConsultants.com )
    www.AskCodeMan.com

  2. #2
    Join Date
    Mar 2007
    Location
    Philadelphia PA
    Posts
    3,177

    Default Re: editing

    Let's see what happens when I try it with firefox...

    no problemo

    Last edited by John Arnold; 04-25-2007 at 08:48 AM. Reason: testing editing button
    "There is no exception to the rule that every rule has an exception." -James Thurber, writer and cartoonist (1894-1961)
    www.ArnoldHomeInspections.com

  3. #3
    Join Date
    Oct 2003
    Location
    Rockwall Texas
    Posts
    4,517

    Default Re: editing

    Edit test

    Worked for me too.

    Last edited by Rick Hurst; 04-25-2007 at 08:56 AM. Reason: verifying edit function

  4. #4
    Join Date
    Mar 2007
    Location
    Capistrano Beach, CA
    Posts
    1,416

    Default Re: editing

    I was in the middle of editing Jerry's message (as a test) and the neighborhood lost powere. Jerry, I thought you said just your browser crashed, not the local grid. This reply is from my phone. I guess this is when I catch up on paperwork.I am now editing this from my phone. So far no problems.Jerry, look into your system.

    See InspectionNews' Secret To Getting More Inspections

    -----------------
    Sincerely,
    Brian Hannigan
    InspectionNews.net / InspectionReferral.com
    Helping Inspectors $ucceed Since 1997TM

    Facebook: https://www.facebook.com/InspectionNews
    Twitter: @InspectionNews

  5. #5
    Tim Moreira's Avatar
    Tim Moreira Guest

    Default Re: editing

    Brian,

    I get the same message/problem as Jerry when I went to edit one of my posts.

    I thought it was me, I've been having computer problems myself, but after rebooting and tring again and agian I get the same message and internet explorer closes out to my desk top.

    BTW, is there a mute button for Megan?


  6. #6
    Join Date
    Mar 2007
    Location
    Capistrano Beach, CA
    Posts
    1,416

    Default Re: editing

    Sounds like you may have two issues.

    1) Editing

    2) Megan. Megan will only play once per session. Are you seeing her on every page you go to? You should see her once and that is all until you close your browser and return or return after a long time away.

    Let me know.


    .... Just came back in to edit (to test). No problem.

    See InspectionNews' Secret To Getting More Inspections

    -----------------
    Sincerely,
    Brian Hannigan
    InspectionNews.net / InspectionReferral.com
    Helping Inspectors $ucceed Since 1997TM

    Facebook: https://www.facebook.com/InspectionNews
    Twitter: @InspectionNews

  7. #7
    Tim Moreira's Avatar
    Tim Moreira Guest

    Default Re: editing

    Editing is the problem. When I click on it I get the same error message as Jerry and then the Internet Browser closes leaving me back to the dest top.


    Megan was just getting annoying after rebooting several time and getting back to this thread.


  8. #8
    Tim Moreira's Avatar
    Tim Moreira Guest

    Default Re: editing

    test.

    Well, it works on my laptop but not my desk top. That's weird and going to be a real pain for the future it it stays this way.


  9. #9
    Join Date
    Mar 2007
    Location
    Capistrano Beach, CA
    Posts
    1,416

    Default Re: editing

    Anyone else having an issue when they click on "edit"?

    Please let me know.

    See InspectionNews' Secret To Getting More Inspections

    -----------------
    Sincerely,
    Brian Hannigan
    InspectionNews.net / InspectionReferral.com
    Helping Inspectors $ucceed Since 1997TM

    Facebook: https://www.facebook.com/InspectionNews
    Twitter: @InspectionNews

  10. #10
    Join Date
    Mar 2007
    Location
    Ormond Beach, Florida
    Posts
    25,304

    Default Re: editing

    My 'Edit' problems just started today or late last night, but it was working before that.

    Nothing on my computer has (to my knowledge) changed.

    Yeah, Megan is another problem - can you give a way to make her not appear if we do not want her? Please.

    Jerry Peck, Construction / Litigation Consultant
    Construction Litigation Consultants, LLC ( www.ConstructionLitigationConsultants.com )
    www.AskCodeMan.com

  11. #11
    Bob White's Avatar
    Bob White Guest

    Default Re: editing

    I just went back to the "Megan" thread to test edit (twice) ...

    Hit the edit button, and IE errored out and shut down...

    It looks like the edit works this time....

    Last edited by Bob White; 04-26-2007 at 05:43 AM. Reason: testing the edit function

  12. #12
    Join Date
    Mar 2007
    Location
    Dallas, Texas
    Posts
    4,112

    Default Re: editing

    I just test did a test edit on Rick's snake story and had no problems.
    Using IE
    Jim

    Jim Luttrall
    www.MrInspector.net
    Dallas, Texas

  13. #13
    Join Date
    Mar 2007
    Location
    Capistrano Beach, CA
    Posts
    1,416

    Default Re: editing

    Those having trouble editing please try now and let me know.

    Also let me know if the issue is when you click the "edit" button or the "Advanced Edit" button.

    See InspectionNews' Secret To Getting More Inspections

    -----------------
    Sincerely,
    Brian Hannigan
    InspectionNews.net / InspectionReferral.com
    Helping Inspectors $ucceed Since 1997TM

    Facebook: https://www.facebook.com/InspectionNews
    Twitter: @InspectionNews

  14. #14
    Join Date
    Mar 2007
    Location
    Ormond Beach, Florida
    Posts
    25,304

    Default Re: editing

    My problem is when I click "Edit", I have no chance to get to "Advanced Edit".

    My problem also started about (maybe it was) the same time as Megan started.

    While you are at it, Brian, and if you would, when in Edit mode (at least when I used to be able to get there), it would be helpful if the photo links still appeared in the posts.

    Sometimes I would need to view the photos again, but had to post, then view the photos, then go back and edit my post. It was the same on the old board, but this board is more advanced, so maybe you can do that?

    "Advanced Edit" is (was - can't get to it now) nice because, while "Edit" did not allow you to add photos or files, "Advanced Edit" did.

    Jerry Peck, Construction / Litigation Consultant
    Construction Litigation Consultants, LLC ( www.ConstructionLitigationConsultants.com )
    www.AskCodeMan.com

  15. #15
    Join Date
    Mar 2007
    Location
    Capistrano Beach, CA
    Posts
    1,416

    Thumbs up Re: editing

    OK, those of you that had an error editing please try again and let me know if it has been corrected.

    Jerry, when editing you have full control over your photos.

    What you need to do is go into the edit "Go Advanced" mode and then scroll down below the text box to the "upload photos" area. The same place as when you are uploading photos. Click on "Upload Photo". In there you will find links to your photos ("Current Attachments") in that post and to the right of the photos is a "Remove" button. You can remove photos and/or upload more.

    See InspectionNews' Secret To Getting More Inspections

    -----------------
    Sincerely,
    Brian Hannigan
    InspectionNews.net / InspectionReferral.com
    Helping Inspectors $ucceed Since 1997TM

    Facebook: https://www.facebook.com/InspectionNews
    Twitter: @InspectionNews

  16. #16
    Tim Moreira's Avatar
    Tim Moreira Guest

    Default Re: editing

    test...

    OK it is working now.

    Thanks Brian.


  17. #17
    Join Date
    Mar 2007
    Location
    Capistrano Beach, CA
    Posts
    1,416

    Default Re: editing

    Great! Glad to hear we are back on track.

    Jerry, is yours working too?

    See InspectionNews' Secret To Getting More Inspections

    -----------------
    Sincerely,
    Brian Hannigan
    InspectionNews.net / InspectionReferral.com
    Helping Inspectors $ucceed Since 1997TM

    Facebook: https://www.facebook.com/InspectionNews
    Twitter: @InspectionNews

  18. #18
    Join Date
    Mar 2007
    Location
    Capistrano Beach, CA
    Posts
    1,416

    Default Re: editing

    Hey Tim,

    How about now?

    See InspectionNews' Secret To Getting More Inspections

    -----------------
    Sincerely,
    Brian Hannigan
    InspectionNews.net / InspectionReferral.com
    Helping Inspectors $ucceed Since 1997TM

    Facebook: https://www.facebook.com/InspectionNews
    Twitter: @InspectionNews

  19. #19
    Bob White's Avatar
    Bob White Guest

    Default Re: editing

    'Edit' worked for me this morning.


  20. #20
    Join Date
    Mar 2007
    Location
    Ormond Beach, Florida
    Posts
    25,304

    Default Re: editing

    I've been afraid to try it but here goes.

    If it works, I will add a line below this line, if not line is below ... well, that means it did not work.

    Guess what, there is now a line here. Now I'm going to try the Go Advanced.

    Go Advanced worked too.

    Thanks Brian.

    Now, on this Megan thing ...

    Jerry Peck, Construction / Litigation Consultant
    Construction Litigation Consultants, LLC ( www.ConstructionLitigationConsultants.com )
    www.AskCodeMan.com

  21. #21
    Join Date
    Mar 2007
    Location
    Capistrano Beach, CA
    Posts
    1,416

    Thumbs up Re: editing

    Jerry,

    You need to edit your post from "well, that means it did not work." to "well, that means it did work."

    Megan is working part time now.

    See InspectionNews' Secret To Getting More Inspections

    -----------------
    Sincerely,
    Brian Hannigan
    InspectionNews.net / InspectionReferral.com
    Helping Inspectors $ucceed Since 1997TM

    Facebook: https://www.facebook.com/InspectionNews
    Twitter: @InspectionNews

  22. #22
    Tim Moreira's Avatar
    Tim Moreira Guest

    Default Re: editing

    test, test, test


    Yepper, it works now.

    Thank you.


  23. #23
    Join Date
    Mar 2007
    Location
    Ormond Beach, Florida
    Posts
    25,304

    Default Re: editing

    Quote Originally Posted by Brian Hannigan View Post
    Jerry,

    You need to edit your post from "well, that means it did not work." to "well, that means it did work."
    No, I had/have it correct, read that sentence again.

    "If it works, I will add a line below this line, if not line is below ... well, that means it did not work."

    I should, though, go back and edit the "if not line' to "if no line".

    Jerry Peck, Construction / Litigation Consultant
    Construction Litigation Consultants, LLC ( www.ConstructionLitigationConsultants.com )
    www.AskCodeMan.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •