Results 1 to 2 of 2
  1. #1
    Chip O'Brian's Avatar
    Chip O'Brian Guest

    Default Testing A/C, For Standard A/C units, heat pump, Geothermal HP

    Any documentation of when it's to cold outside to test HVAC's in A/C mode? For Heat pumps, Standard central A/C, Geothermal HP In A/C mode?

    Heat pumps basicly 65 temp rule of thumb. But where is doc's this and others?

    Similar Threads:
    Inspection Referral

  2. #2
    Join Date
    Mar 2007
    Location
    Plano, Texas
    Posts
    4,245

    Default Re: Testing A/C, For Standard A/C units, heat pump, Geothermal HP

    This horse has been beaten here before. I am sure a search would turn up the thread.
    But to answer your question, NO.
    You would need to check the instructions from the individual manufacturers. or use a rule of thumb.
    I don't test A/C below 60 even though most can be safely operated a few degrees lower.
    Heat pumps are designed to run at low temperatures, so no problem.
    Heat pumps can be damaged from operating too long when it is hot, but momentary operation is OK in my experience.

    Jim Luttrall
    www.MrInspector.net
    Plano, Texas

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •