Results 1 to 5 of 5
Thread: Need info
-
02-27-2009, 12:11 PM #1
Richard Roshak Guest
Need info
I need help to determine if a gas forced heating unit is installed correctly. Its a Comfortmaker model# GNI60A012AIN, serial#R920401796. Can this unit be installed horizontally?
Rich
Similar Threads:
-
02-27-2009, 01:08 PM #2
Member
- Join Date
- Mar 2007
- Location
- Spring Hill (Nashville), TN
- Posts
- 5,851
Re: Need info
Looking at the bottom of the data plate it says that it is approved for a horizontal flue pipe.
Was it installed that way or was it coming out the top?
Outside of that I would contact the manufacturer, they will know for sure.
-
02-27-2009, 03:40 PM #3
Member
- Join Date
- Oct 2003
- Location
- Rockwall Texas
- Posts
- 4,521
Re: Need info
Good eye there, Scott.
Rick
-
02-27-2009, 06:45 PM #4
Member
- Join Date
- Mar 2007
- Location
- Fletcher, NC
- Posts
- 28,042
Re: Need info
It also says "(Forc)...ed Air Furnace For Indoor Installation Building"
Higher up it states this again "For Indoor Installation At Minimum Clearance"
Now, is an "attic" "indoor", or, by "indoor" do they mean 'in the thermal envelope"?
I suspect they mean 'not outdoors', which could be in an attic, but, the way it is worded ...
Does that bottom line mean for horizontal installation, or just for "(List)...ed For Single Pipe Horizontal Vent"?
-
02-28-2009, 11:47 AM #5
Member
- Join Date
- Jan 2009
- Location
- Tennessee
- Posts
- 12
Re: Need info
The GNI series forced-air furnace is an induced draft, high efficieny model which can be installed in the upflow or horizontal position. It is approved for horizontal venting.
Reply With Quote
Bookmarks