Results 1 to 4 of 4
  1. #1
    Join Date
    Sep 2008
    Location
    so so, California
    Posts
    1,769

    Default What's this wire for?

    Wuts up with the wire? Haven't seen this one before.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Member Benefits1
    The MAZZA INSPECTION GROUP
    www.mazzainspections.com
    Level III Thermo-picture-taker-er...er

  2. #2
    Join Date
    Mar 2007
    Location
    Plano, Texas
    Posts
    4,170

    Default Re: What's this wire for?

    Low voltage sensor that kills the unit if water is present.

    Jim Luttrall
    www.MrInspector.net
    Plano, Texas

  3. #3
    Join Date
    Sep 2008
    Location
    so so, California
    Posts
    1,769

    Default Re: What's this wire for?

    Big Jim...thanks.

    The MAZZA INSPECTION GROUP
    www.mazzainspections.com
    Level III Thermo-picture-taker-er...er

  4. #4
    Join Date
    Mar 2007
    Location
    Ormond Beach, Florida
    Posts
    26,244

    Default Re: What's this wire for?

    Quote Originally Posted by Jim Luttrall View Post
    Low voltage sensor that kills the unit if water is present.
    Then proceeds to cause the unit to leak condensation all over the place as a result of that shutting down.

    It is a result of pressure from the HVAC contractors to allow that switch without also requiring what would stop that from happening.

    Jerry Peck, Construction / Litigation Consultant
    Construction Litigation Consultants, LLC ( www.ConstructionLitigationConsultants.com )
    www.AskCodeMan.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •