Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2007
    Location
    Oregon
    Posts
    2,365

    Default Mixed vent materials

    2 year old 90+ forced air furance... mostly PVC but has a couple ABS elbows. I could swear I read that's a no go but I can't find it in the manual or searching online.

    Anyone have an opinion?

    Similar Threads:
    Crawl Space Creeper

  2. #2
    Rick Hill's Avatar
    Rick Hill Guest

    Default Re: Mixed vent materials

    The State of Idaho has said that two different venting materials like you discribed are not allowed.


  3. #3
    Join Date
    Mar 2007
    Location
    Near Philly, Pa.
    Posts
    1,682

    Cool Re: Mixed vent materials

    Look up both pipe mfrs and see what they say about mixing their brand/ model pipe with other brands of similar material, much less other types of materials. I'm not aware of anyone advocating mixing types of plastic pipe. The plumbing code would probably allow it for DWV and in that application I would expect a Fernco fitting to be an acceptable transition.

    However, with combustion appliances, esp. CAT IV, the code always point you to the appliance mfrs listed instructions.

    Keep the fire in the fireplace.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •