Results 1 to 3 of 3
  1. #1
    dan orourke's Avatar
    dan orourke Guest

    Default condensate drain connection

    Last edited by dan orourke; 01-02-2008 at 09:33 AM.
    Member Benefits1

  2. #2
    Join Date
    Mar 2007
    Lake Barrington, IL

    Default Re: condensate drain connection

    Not proper. It is BillieBob's MO though.

    And, BTW, welcome.

    Eric Barker, ACI
    Lake Barrington, IL

  3. #3
    Kevin VanderWarf's Avatar
    Kevin VanderWarf Guest

    Default Re: condensate drain connection

    The only reason I might say it's allowed is the age of the system and it's factory specs and I don't know what the code would have been then(whatever the age is).
    I've seen a lot of older systems with ABS connected to PVC.
    However, I would write that up and recommend 3/4 pvc.
    The one thing about ABS, it's never sloped properly.
    On my reports, if it's not PVC it's gotta go.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts