Results 1 to 5 of 5
-
05-19-2008, 06:59 PM #1
Member
- Join Date
- Mar 2007
- Location
- Fletcher, NC
- Posts
- 28,042
How "level" is "level" ... and other ponderables
I was at a site today approving an installation and was perusing the installation manual will some corrections were being made ...
The attached answer several ponderables we have pondered here at various times.
Similar Threads:
-
05-20-2008, 05:49 AM #2
Member
- Join Date
- Mar 2007
- Location
- Georgetown, KY
- Posts
- 538
Re: How "level" is "level" ... and other ponderables
So did I just miss the "level" part?
Erby Crofutt, Georgetown, KY - Read my Blog here: Erby the Central Kentucky Home Inspector B4 U Close Home Inspections www.b4uclose.com www.kentuckyradon.com
Find on Facebook at: https://www.facebook.com/B4UCloseInspections
-
05-20-2008, 05:59 AM #3
Member
- Join Date
- Mar 2007
- Location
- Fletcher, NC
- Posts
- 28,042
Re: How "level" is "level" ... and other ponderables
Originally Posted by Erby Crofutt
Oops ... forgot that one.
Dang! Forgot the one which was the main reason for my post.
-
05-20-2008, 06:26 AM #4
Member
- Join Date
- Mar 2007
- Location
- Connecticut
- Posts
- 1,828
Re: How "level" is "level" ... and other ponderables
Another thing to ponder is How level is the level. I have seen workers pull levels out of their bucket that look like they boosted their back tire out of a hole with it. Ah but after a quick check, Surprise 2 degrees variance. I have found my eye to be as good as most levels. Before 7 pm anyway
-
05-20-2008, 08:25 AM #5
Member
- Join Date
- Mar 2007
- Location
- Fletcher, NC
- Posts
- 28,042
Re: How "level" is "level" ... and other ponderables
Wayne,
Did you notice the reason for the 2 degrees allowable?
"compressor manufacturer specifications"
Reply With Quote
Bookmarks