Page 2 of 2 FirstFirst 12
Results 66 to 67 of 67

Thread: Myth Buster

  1. #66
    Join Date
    Mar 2007
    Location
    Ormond Beach, Florida
    Posts
    25,314

    Default Re: Myth Buster

    Quote Originally Posted by John Ghent View Post
    O.K. Help me out here. they state that the "total horizontal is less than 75% of the vertical." Which vertical? From the heater to the bend? From the horizontal connection to the roof?
    John,

    From the draft hood to the top of the vent. That's the total vertical height.

    Inspection Referral SOC
    Jerry Peck, Construction / Litigation Consultant
    Construction Litigation Consultants, LLC ( www.ConstructionLitigationConsultants.com )
    www.AskCodeMan.com

  2. #67
    Join Date
    May 2007
    Location
    Frankfort, KY
    Posts
    326

    Default Re: Myth Buster

    Quote Originally Posted by Rick Hurst View Post
    Any opinions on this set up? First one I've seen.
    That is even worse than just leaving a drafthood only there.

    Measured Performance more than just a buzzword

Page 2 of 2 FirstFirst 12

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •