Results 1 to 5 of 5
  1. #1
    Join Date
    May 2008
    Location
    Atlanta
    Posts
    120

    Default Water Heater venting into B-vent

    This water heater vents into the furnace B-vent. The water heater vent pipe is smaller than the T-connector seems to accept. They had some foil tape around the connection, but it was loose and not sealing anything. As you can see, there is a pretty good gap here, but I couldn't see thru into the vent.

    Question is, is it possible this is properly sealed inside this connector, or is this an automatic issue?

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    OREP Insurance

  2. #2
    Join Date
    Mar 2007
    Location
    Plano, Texas
    Posts
    4,245

    Default Re: Water Heater venting into B-vent

    It's crap, write it up to have a professional correct.

    Jim Luttrall
    www.MrInspector.net
    Plano, Texas

  3. #3
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: Water Heater venting into B-vent

    Ditto to what Jim said. They make connectors so that you don't have to tape the pipes together. They just need to get the right ones!

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  4. #4
    Join Date
    Aug 2007
    Location
    Memphis TN.
    Posts
    4,311

    Default Re: Water Heater venting into B-vent

    Quote Originally Posted by Scott Patterson View Post
    Ditto to what Jim said.

    They make connectors so that you don't have to tape the pipes together.

    They just need to get the right ones!
    .
    With the Correct ( Screws ) connectors.
    .

    It Might have Choked Artie But it ain't gone'a choke Stymie! Our Gang " The Pooch " (1932)
    Billy J. Stephens HI Service Memphis TN.

  5. #5
    Join Date
    May 2008
    Location
    Atlanta
    Posts
    120

    Default Re: Water Heater venting into B-vent

    Thanks guys. They also used PVC for the TPR exit line. I tried it out, and it sprayed all over the place. At least the valve was working.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •