Results 1 to 7 of 7
-
07-04-2007, 12:25 PM #1
Eric Shuman Guest
Here's one for the defect photo album...
This was one issue among many at this water heater. There was still a gas company red tag hanging on the water heater form 2000 saying it should not be used until properly installed.
Similar Threads:
-
07-04-2007, 03:10 PM #2
Richard Rushing Guest Re: Here's one for the defect photo album...
That pinched hot water supply line doesen't look good, either...
RR
-
07-04-2007, 03:16 PM #3
Member
- Join Date
- Oct 2003
- Location
- Rockwall Texas
- Posts
- 4,521
Re: Here's one for the defect photo album...
PICKY PICKY
Rich,
Thats one of those "cosmetic" issues.
-
07-04-2007, 03:24 PM #4
Richard Rushing Guest Re: Here's one for the defect photo album...
Yeah, I know... too picky.
I guess the lack of a water shut-off valve and equipment bond wasn't important enough for the DIY'er to install either.
RR
-
07-04-2007, 03:40 PM #5
Member
- Join Date
- Mar 2007
- Location
- Near Philly, Pa.
- Posts
- 1,682
Re: Here's one for the defect photo album...
Aside from the venting, I like the crushed copper flex coming off the hot. Nice touch.
Keep the fire in the fireplace.
-
07-04-2007, 04:40 PM #6
Member
- Join Date
- Mar 2007
- Location
- Spring City/Surrounding Philadelphia area
- Posts
- 3,509
Re: Here's one for the defect photo album...
Bob, that's not a crushed copper flex line. That's a pressure reducing valve.
-
07-05-2007, 03:38 AM #7
Eric Shuman Guest Re: Here's one for the defect photo album...
Yeah, pressure reducer! I couldn't remeber the name for that kind of valve!
Not pictured:
No drain pipe at TPR vlave
No pan w/drain (heater sitting in dead center of house)
Combustible clearance issues in attic
Combustion air was limited
Eric
Reply With Quote
Bookmarks