Results 1 to 2 of 2
Thread: Doors for PEX Maniblocs
08-18-2007, 03:00 PM #1
Doors for PEX Maniblocs
Last edited by Clay E White; 01-04-2008 at 01:36 PM.
08-18-2007, 08:52 PM #2
Re: Doors for PEX Maniblocs
There are but two choices (unless it has a fire rating): 1) the door is 1/2" gypsum board; 2) there is a 5 sided box constructed of 1/2" gypsum board surrounding the manifold (thereby taking the separation around behind the manifold, in which case, no door is even required).
Well, there are other choices, just not practical ones - look up what types are doors are allowed, that also applies to these doors - if you do not make them 'equivalent' to the wall.
Last edited by Jerry Peck; 08-18-2007 at 09:00 PM.