Results 1 to 4 of 4
  1. #1
    Join Date
    Aug 2011
    Location
    Bennett (Denver metro), Colorado
    Posts
    1,461

    Default Old Gas Shut-off for Appliances

    Around these here parts....Over the last few years, I've had several HVAC techs & plumbers tell me that the old tang gas shut-offs that require a tool to operate must be replaced with hand operable shut-offs anytime a gas appliance is replaced. But recently, one of our AHJs told me that it was a good idea, but not required. I tried to find some mention of it in the IRC but cannot. G2420 covers locations of shut-offs and access, but I don't see any comment on whether the valve requires a tool or hand to operate it.
    Am I missing something?


    Similar Threads:
    OREP Insurance
    If you choose not to decide, you still have made a choice.

  2. #2
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Old Gas Shut-off for Appliances

    May be addressed in one of the standard referenced in G2420 for gas valves, but you would need the standards to find out.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  3. #3
    Join Date
    Sep 2017
    Location
    WV
    Posts
    34

    Default Re: Old Gas Shut-off for Appliances

    Quote Originally Posted by Lon Henderson View Post
    Around these here parts....Over the last few years, I've had several HVAC techs & plumbers tell me that the old tang gas shut-offs that require a tool to operate must be replaced with hand operable shut-offs anytime a gas appliance is replaced. But recently, one of our AHJs told me that it was a good idea, but not required. I tried to find some mention of it in the IRC but cannot. G2420 covers locations of shut-offs and access, but I don't see any comment on whether the valve requires a tool or hand to operate it.
    Am I missing something?
    As far as if replacing an appliance it would be good common sense at the least and the code is vague at best. I do know whenever we were at a customers house on a leak call we greased all of the old style valves , it helped prevent recalls and also made them a lot easier to operate. Today I don't believe the companies care about the customers that much since it is all time and money.


  4. #4
    Join Date
    Jun 2018
    Location
    South Carolina
    Posts
    6

    Default Re: Old Gas Shut-off for Appliances

    Depends on your local jurisdictions' requirement for accessibility. Some AHJ's require that it not require special tools or keys to operate a valve (differences usually applied for readily accessible vs. accessible , etc..).


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •