Thread: EXPOSED EXHAUST FAN IN SHOWER

Guys

Home made shower in basement and fan is installed right above shower head--is this correct and it is gfci protected--

cvf

Similar Threads:

• Exposed Kerdi / Foamboard Under Shower Bench
• exposed romex
• exposed cable run
• Exposed OSB
• Exhaust fan is shower

I doubt that fan is damp location rated, it would to need to be damp location or wet location rated.

To know for sure, you would need to to remove the grille and read the labeling to see what it's listed for.

thanks Jerry will check labeling when i pick up radon

cvf

Charlie,

Curious as to what that exhaust fan was rated for.

Dry Location or Damp Location?

dry Jerry--no permit so it's a do over for seller

cvf

Charlie,

Curious as to the height inside that shower (floor to ceiling), did it seem high enough, or kinda crampa heightwise?

jerry

i'm 6'2" and had not alot of head room maybe a foot

Originally Posted by CHARLIE VAN FLEET

i'm 6'2" and had not alot of head room maybe a foot

A foot more than 6'2" is good.

The headroom clearance for bathrooms and toilet rooms is 6'8" (shower floor to shower ceiling, i.e., the "headroom" in a shower, is also minimum is 6'8").