Results 1 to 9 of 9
Thread: Any Idea's
-
09-19-2008, 07:01 PM #1
-
09-19-2008, 07:26 PM #2
Re: Any Idea's
Any Ideas ?
Screen Your Calls More Carefully.
.
It Might have Choked Artie But it ain't gone'a choke Stymie! Our Gang " The Pooch " (1932)
Billy J. Stephens HI Service Memphis TN.
-
09-20-2008, 07:13 AM #3
Re: Any Idea's
maybe a separate line intended to be used to prime the pump.Left over from an old pump?
-
09-20-2008, 10:41 AM #4
Re: Any Idea's
Looks like a hose barb connection on the end. Maybe an air line for blowing something out?
-
09-20-2008, 03:22 PM #5
Re: Any Idea's
Wayne. I saw one of these years ago and the Realtor told me the well guy says. " The well guy mentioned the copper tubing was a vent that used to be installed in the older well systems until they started using the well head for venting"
Hope that helps.
-
09-20-2008, 04:22 PM #6
Re: Any Idea's
It could be a tube used to put hot water or steam through if the incoming water line freezes.
-
09-20-2008, 07:04 PM #7
Re: Any Idea's
Thanks for the input. I of course sent them over to consult with the well service company but some of the answers were interesting. The venting or priming seem to make sense but the copper line appears to have been installed with the recent upgrade to a bladder tank. The hot water thaw theory seems unlikely, but they don't call them the three stooges for nothing, and Billy of course had the best idea of all. Go Figga!!
From one JA to another BILLY. HEEEEEEEHAW my friend!!!!
-
09-20-2008, 07:37 PM #8
-
09-20-2008, 08:49 PM #9
Re: Any Idea's
Hey, Who said stop the HEEHAW?
Bookmarks