Results 1 to 2 of 2
  1. 05-16-2009, 07:43 AM #1
    Daniel Leung's Avatar
    Daniel Leung Guest

    Default Vent stack on metal roof

    These two photos of vent stacks are taken from a 20-year metal roof. No EPDM boot flashing is used. Are they acceptable?

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Inspection Referral
    Reply With Quote Reply With Quote
  2. 05-16-2009, 08:03 AM #2
    Scott Patterson's Avatar
    Scott Patterson
    Scott Patterson is offline Member
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: Vent stack on metal roof

    Quote Originally Posted by Daniel Leung View Post
    These two photos of vent stacks are taken from a 20-year metal roof. No EPDM boot flashing is used. Are they acceptable?
    Nope! A special metal roof flashing boot is made for this type of roof.
    This is a link to one company that makes them.
    Thalermetal.com: Department: 'Unknown Department'

    Last edited by Scott Patterson; 05-16-2009 at 08:12 AM.
    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules