Results 1 to 10 of 10
Thread: Not sure if this will work.
-
08-29-2013, 05:13 AM #1
Member
- Join Date
- Mar 2007
- Location
- Cape Cod, Massachusetts
- Posts
- 614
Not sure if this will work.
Nothing seems to surprise me anymore.
Does a wash machine discharge more than 5 gals?
-
08-29-2013, 11:06 AM #2
Member
- Join Date
- Feb 2008
- Location
- New York
- Posts
- 868
Re: Not sure if this will work.
If the pail overflows, they can always empty it into the sink.
-
08-29-2013, 12:18 PM #3
Member
- Join Date
- Mar 2007
- Location
- Knoxville, TN
- Posts
- 2,560
Re: Not sure if this will work.
It seems its working just fine>
-
08-29-2013, 01:05 PM #4
Member
- Join Date
- Mar 2008
- Location
- Charlotte NC
- Posts
- 2,304
Re: Not sure if this will work.
I agree! That is the air-gap required by the AHJ
Originally Posted by Jack Feldmann
The beatings will continue until morale has improved. mgt.
-
08-29-2013, 01:46 PM #5
Member
- Join Date
- Mar 2007
- Location
- Columbus GA
- Posts
- 3,747
Re: Not sure if this will work.
Just to clarify, that is not an air gap. Originally Posted by Vern Heiler
I agree! That is the air-gap required by the AHJ
A washing machine does not require an air gap, only an air break.
What is shown is an air break.
I only mention this because some HI's may not understand the difference in an air gap/ air break or which one is required for a washing machine.
' correct a wise man and you gain a friend... correct a fool and he'll bloody your nose'.
-
08-29-2013, 02:58 PM #6
Member
- Join Date
- Mar 2008
- Location
- Charlotte NC
- Posts
- 2,304
Re: Not sure if this will work.
You are correct sir... Originally Posted by Rick Cantrell
The beatings will continue until morale has improved. mgt.
-
08-29-2013, 03:19 PM #7
Member
- Join Date
- Mar 2007
- Location
- Columbus GA
- Posts
- 3,747
Re: Not sure if this will work.
"sir" ? Originally Posted by Vern Heiler
Uh oh
Vern
I wasn't poking at you.
I realize you were making a lighthearted comment not intended to be technically accurate.
I really was thinking it may confuse some HI's (not you) about air gaps/ air breaks.
Last edited by Rick Cantrell; 08-29-2013 at 04:47 PM.
' correct a wise man and you gain a friend... correct a fool and he'll bloody your nose'.
-
08-29-2013, 05:13 PM #8
Member
- Join Date
- Mar 2008
- Location
- Charlotte NC
- Posts
- 2,304
Re: Not sure if this will work.
That was in my best Ed McMahon voice Originally Posted by Rick Cantrell
... and it was good that you pointed it out. No problem here.
Looking again, there might be an air-gap and an air-break
The beatings will continue until morale has improved. mgt.
-
08-29-2013, 05:27 PM #9
Member
- Join Date
- Aug 2007
- Location
- Memphis TN.
- Posts
- 4,311
Re: Not sure if this will work.
Come on Guys !!! Originally Posted by Ken Amelin
The Bucket is for the Sink.
The WM Drains into the Drain hole cut into the wall.
It Might have Choked Artie But it ain't gone'a choke Stymie! Our Gang " The Pooch " (1932)
Billy J. Stephens HI Service Memphis TN.
-
08-30-2013, 02:18 PM #10
Banned
- Join Date
- Feb 2008
- Location
- Caledon, Ontario
- Posts
- 4,982
Re: Not sure if this will work.
At least they had the foresight to install burst proof feed lines.
Reply With Quote
Bookmarks