Results 1 to 6 of 6
  1. #1
    mathew stouffer's Avatar
    mathew stouffer Guest

    Default Flat metal roofing

    How often do you see metal installed on flat roofing surfaces? Is it acceptable or does it depend on the manufacture. There were so many installation issues on this roof, I furgured mentioned this would reduce liability, because it looks like this is a leak waiting to happen.

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Member Benefits1

  2. #2
    Join Date
    Mar 2007
    Location
    Tampa, Fl
    Posts
    155

    Default Re: Flat metal roofing

    I believe it depends on the manufacturer specifications. Certainly worth questioning.


  3. #3
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Flat metal roofing

    Two things:

    Most metal roofing is for 4:12 slopes and steeper (at least the exposed fastener styles). Some of the concealed fastener styles are allowed to be 1/2" to 1" per foot slope.

    That looks like pans for porch roofs, which are concealed fastener types and are allowed to be, I believe, down to about 1/2" or 1" per foot slope. Some of those are aluminum, others are galvanized, some are insulated pans which insulate the room underneath from the hot sun baked roof above.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  4. #4
    Join Date
    Feb 2008
    Location
    Caledon, Ontario
    Posts
    4,982

    Default Re: Flat metal roofing

    There likely is insufficient slope, thus the heat cables to stop the ponding of water from freezing and getting up under seams.

    Never seen nailer plates for heat cable like that, just screwed into the metal roof sure looks like a leak waiting to happen, if not already leaking.


  5. #5
    mathew stouffer's Avatar
    mathew stouffer Guest

    Default Re: Flat metal roofing

    Jerry,
    Most of the area is over a deck, howerver, there is one area which is flat and it intersects with the living space.


  6. #6
    mathew stouffer's Avatar
    mathew stouffer Guest

    Default Re: Flat metal roofing

    Raymond,
    The heat tape was an "upgrade". I told the owner fasteners installed like that will void the roof warranty. Good call.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •