Results 1 to 7 of 7
  1. #1
    Jonathan Cartwright's Avatar
    Jonathan Cartwright Guest

    Default Single handle faucet question

    What causes some single handle type faucets to shut almost all the way off when operating?

    Example: Pull the faucet all the way open - good water flow. Release the handle and the handle moves toward the closed position and water flow is reduced accordingly.

    Thanks and have a great day.

    Jonathan

    Similar Threads:
    Crawl Space Creeper

  2. #2
    Join Date
    Mar 2007
    Location
    Santa Rosa, CA
    Posts
    3,154

    Default Re: Single handle faucet question

    Quote Originally Posted by Jonathan Cartwright View Post
    What causes some single handle type faucets to shut almost all the way off when operating?

    Example: Pull the faucet all the way open - good water flow. Release the handle and the handle moves toward the closed position and water flow is reduced accordingly.
    JC,

    Not entirely sure. I usually attribute that to wear and suggest replacement of the cartridge/valve stem or any needed repairs by a licensed plumbing contractor.

    Department of Redundancy Department
    Supreme Emperor of Hyperbole
    http://www.FullCircleInspect.com/

  3. #3
    Join Date
    Mar 2007
    Location
    Columbus GA
    Posts
    3,747

    Default Re: Single handle faucet question

    I've seen this a few times before.

    Replace the cartridge or O-rings.
    O-rings cost less but the cartridge is simpler.

    ' correct a wise man and you gain a friend... correct a fool and he'll bloody your nose'.

  4. #4
    Join Date
    Mar 2007
    Location
    Orlando, FL
    Posts
    1,593

    Default Re: Single handle faucet question

    Cheap, aftermarket cartridges can cause that behavior.


  5. #5
    chris mcintyre's Avatar
    chris mcintyre Guest

    Default Re: Single handle faucet question

    Quote Originally Posted by Rick Cantrell View Post
    Replace the cartridge or O-rings.
    O-rings cost less but the cartridge is simpler.

    Unless it's a moen. If it's a moen, take the cartridge to the plumbing supply house (not the box stores) and they will exchange it at no charge.


  6. #6
    Join Date
    Jul 2008
    Location
    Snowbird (this means I'm retired and migrate between locations), FL/MI
    Posts
    4,086

    Default Re: Single handle faucet question

    Sometimes the lever handle set screw or fastening nut hasn't been tightened sufficiently. As previously mentioned, sometimes it is cartridge related, occasionally a flow restriction before hand such as supply valve(s) not fully opened, kink, etc., sometimes not enough friction such as the moen pull-out/up o-ring issues and plastic cartridges. Sometimes it is the ball/socket or gear interface between underside of lever handle broken or striped plastic, nylon, or pot metal.


  7. #7
    Jonathan Cartwright's Avatar
    Jonathan Cartwright Guest

    Thumbs up Re: Single handle faucet question

    Thank you for the information. Excellent as always.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •