Results 1 to 3 of 3
Thread: Is this a problem?
-
03-25-2011, 05:29 AM #1
Is this a problem?
Do you see this as a problem? If so what is the defect?
I originally looked at this as a problem, but the house is 25 years old, no cracks in the block, no signs of stress or leakage - Although it looks funny, I couldn't come up with a reason to write it up???
Similar Threads:
-
03-25-2011, 09:00 AM #2
Re: Is this a problem?
Well,,,, someone could have at least made an attempt to corbel it. The question I have is what might have the installer done with the interior of the chimney? I'd feel more comfortable if it was checked out just to be sure.
I won't have any hesitation to make a revision to the report and let the client know that upon further thought you felt it best to pursue this. I've done this a few times and have slept better at night.
Eric Barker, ACI
Lake Barrington, IL
-
03-25-2011, 10:27 AM #3
Re: Is this a problem?
LeveL II per usual. Is that offset more than 30* from vertical? How did they make the joints? Clearance to combustible joist 2"? Attic insulation shields? Sure, lots of questions here.
Keep the fire in the fireplace.



Reply With Quote
Bookmarks