Results 1 to 25 of 25
  1. #1
    Stephen G Sheldon's Avatar
    Stephen G Sheldon Guest

    Default Is It Wood Or Cement?

    I sometimes have a difficult time distinguishing between hardboard and cement siding. Are there any specific things to look for or other ways to differentiate between the two?

    Similar Threads:
    Crawl Space Creeper

  2. #2
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Is It Wood Or Cement?

    Quote Originally Posted by Stephen G Sheldon View Post
    I sometimes have a difficult time distinguishing between hardboard and cement siding. Are there any specific things to look for or other ways to differentiate between the two?
    "Is It Wood Or Cement?

    Neither of those two choices are "wood".

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  3. #3
    Stephen G Sheldon's Avatar
    Stephen G Sheldon Guest

    Default Re: Is It Wood Or Cement?

    Ok. But is there a way to tell the difference?


  4. #4
    Join Date
    Mar 2007
    Location
    Columbus GA
    Posts
    3,747

    Default Re: Is It Wood Or Cement?

    Use a nail or knife to probe the surface.
    Hard board is softer than cement board.

    ' correct a wise man and you gain a friend... correct a fool and he'll bloody your nose'.

  5. #5
    Join Date
    Jul 2008
    Location
    Snowbird (this means I'm retired and migrate between locations), FL/MI
    Posts
    4,086

    Default Re: Is It Wood Or Cement?

    engineered or manufactured sidings/shingles/panels materials can include

    Fiber cement siding (most generally utilize cellulose fibers (wood)
    cement asbestos siding, engineered fiber sidings including asbestos,
    engineered wood siding, composite wood, includes hardboard, plywood, T-1, etc.

    Some harboards utilize polymers, waxes, resins, fillers, and/or cement.

    Not all contain cementous ingrediants.

    Knock test, visualizing edges, examining with more than just the naked eye. Surface temperature variations.

    Without specific knowledge or invasive and/or destructive examination /removal/ sample testing it can be difficult to definitively determine the precise componants and product identification of engineered siding materials already installed and coated and without any exposed portion, backside, etc. stamped or otherwise labeled, taged, or identified.

    In general, regular HI is not invasive or destructive, and doesn't include the movement or removal of building elements or damaging surfaces, including the building envelope, its paints or coatings upon sidings, etc. Doing same is not without liability.

    Disturbance or damaging/probing of encapsulated asbestos containing materials or those which may be resonably suspected or expected of same, or for that matter surfaces, coatings, etc. which may contain lead, mercury, and other environmental and health hazards, by an HI is not advised.

    Last edited by H.G. Watson, Sr.; 12-18-2011 at 01:17 PM.

  6. #6
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Is It Wood Or Cement?

    Quote Originally Posted by Stephen G Sheldon View Post
    Ok. But is there a way to tell the difference?
    Quote Originally Posted by Rick Cantrell View Post
    Use a nail or knife to probe the surface.
    Hard board is softer than cement board.
    I wouldn't want to disturb the protective coating (paint) on hardboard, nor would I want to disturb the protective surface of the hardboard.

    Look for cut ends, damaged areas, nailing points, it shouldn't take too long to be able to determine if it is hardboard or not. Any swelling typically indicates hardboard. This is probably one of those times when the best way to learn the difference it to go to local building supply houses/stores and check the two different materials out. If the material is covered with multiple coats of paint, that will hide many of the differences you are looking for, but that also is an indication of something which has been installed a long time (many years, thus many coats of paint), in which case it may well be hardboard.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  7. #7
    Join Date
    Oct 2011
    Location
    Minneapolis, MN
    Posts
    780

    Default Re: Is It Wood Or Cement?

    I try to find areas that have missed being painted, is peeling, or where caulk has pulled away. Hardboard will usually be dark brown (sometimes blond), while cement fiber is gray. Because hardboard is made of wood fiber, sometimes the end cuts are rough. The hardness of hardboard will depend on how it was made, so it may not always be softer than cement fiber. Older hardboard is likely to show signs of moisture problems or peeling paint.

    The main binder of hardboard is the natural lignin found in wood, though it may have resins or other stuff added in small amounts to change its working characteristics.

    Newer installations using cement fiber HardiePlank will often be coupled with HardieTrim, a product that looks a lot like plastic.

    Do not think of knocking out another person's brains because he differs in opinion from you. It would be as rational to knock yourself on the head because you differ from yourself ten years ago.
    - James Burgh, 1754.

  8. #8
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: Is It Wood Or Cement?

    It really is not all that difficult to tell the difference. With an MDF product you can use your fingernail and make a dent in it. Better yet look at the bottom edge, with MDF it will be thicker and it will usually have a curve to it, with fiber cementitious board it is almost always squared off and has a sharper edge.

    I wear a wedding ring, I have found that if I tap the siding with the ring on my finger that it has a sharp sound with fiber cement board and a dull thud with MDF.

    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  9. #9
    Join Date
    Oct 2011
    Location
    Minneapolis, MN
    Posts
    780

    Default Re: Is It Wood Or Cement?

    MDF is different from hardboard, though, isn't it? Inferior, softer, even more liable to have moisture issues. Hardboard is the stuff pegboard is made of, and my fingernails, anyway, don't make a dent in that. I'd be surprised if MDF is even installed as siding these days. It's popular for dollhouses, though!

    Do not think of knocking out another person's brains because he differs in opinion from you. It would be as rational to knock yourself on the head because you differ from yourself ten years ago.
    - James Burgh, 1754.

  10. #10
    Join Date
    Mar 2007
    Location
    Spring Hill (Nashville), TN
    Posts
    5,851

    Default Re: Is It Wood Or Cement?

    Quote Originally Posted by Kristi Silber View Post
    MDF is different from hardboard, though, isn't it? Inferior, softer, even more liable to have moisture issues. Hardboard is the stuff pegboard is made of, and my fingernails, anyway, don't make a dent in that. I'd be surprised if MDF is even installed as siding these days. It's popular for dollhouses, though!
    I believe that the pegboard you are writing about is a different product.

    LP, GP, Celotex, Weyerhaeuser, Masonite all made siding products at one time. When I toured one of the LP plants they called it MDF. Most had class action lawsuits back in the 1990's early 2000 on their poop performance.

    Last edited by Scott Patterson; 12-18-2011 at 08:08 PM.
    Scott Patterson, ACI
    Spring Hill, TN
    www.traceinspections.com

  11. #11
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Is It Wood Or Cement?

    Quote Originally Posted by Kristi Silber View Post
    Hardboard is the stuff pegboard is made of
    Quote Originally Posted by Scott Patterson View Post
    I believe that the pegboard you are writing about is a different product.
    Both have what I have seen advertised as a 'tempered' finished surface in that the finished surface is somehow treated or compressed such that it becomes water resistant. Pegboard does not have the same degree of 'tempering' as it is not intended to get wet and therefore does not need to resist water to the same degree as hardboard siding needs to.

    I'm not sure it is still available, but you used to be able to get the harder, glossier, surface of the hardboard siding available on solid (non-perforated) hardboard sheets which were 4'x8' in size. They even used to (maybe still do) use that and apply a layer of melamine (plastic) to the surface of it, and that melamine surface could be continuous or was available with a surface with indentations which make the board look like 'tile' (albeit really cheap tile) and it was called 'tileboard'.

    MDF is, as I recall, a different product.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  12. #12
    Join Date
    Mar 2007
    Location
    Fuquay Varina, NC
    Posts
    1,074

    Default Re: Is It Wood Or Cement?

    The bottom edge and tapping is how I identify cement fiber. They have a sharp edge and ruff cut look on the bottom.

    They use allot of Miratec around here now and I am already finding swollen and rotting trim boards from not painting the cut edges and placing to close to surfaces. It's the new trim to hate because installer's don't prep it properly. MiraTEC Treated Exterior Composite Trim Product Line

    Mike Schulz License 393
    Affordable Home Inspections
    www.houseinspections.com

  13. #13
    Join Date
    Oct 2011
    Location
    Minneapolis, MN
    Posts
    780

    Default Re: Is It Wood Or Cement?

    The hardboard used today for siding is a better product than that used a few decades ago. It was invented in 1924, and has gone through changes since then. The older stuff is softer and soaks up moisture more easily.

    I didn't mean to suggest that pegboard was the same kind of hardboard used in siding, but it's still hardboard.

    Here's page about defects in installation of hardboard siding.

    Do not think of knocking out another person's brains because he differs in opinion from you. It would be as rational to knock yourself on the head because you differ from yourself ten years ago.
    - James Burgh, 1754.

  14. #14
    Join Date
    Jul 2007
    Location
    Chicago
    Posts
    928

    Default Re: Is It Wood Or Cement?

    Go to Home Depot and get a good look.
    Amazing what you can learn about materials by strolling the aisles.


  15. #15
    Join Date
    Feb 2009
    Location
    St. Louis, Mo. area.
    Posts
    280

    Default Re: Is It Wood Or Cement?

    Yea, push on it real hard. If it flexes, it's wood composite or hardboard. If it breaks, it's fiber cement. ROFLMAO!

    Sorry, I couldn't resist that! No, don't push on it - unless of course you want to pay for it.

    Like Scott said, tap on it with a metal object. (He's gonna be out of luck if he ever gets divorced.) With just a little experience telling the two apart, you can usually just tap it with a knuckle or a fingernail, and tell the difference.


  16. #16
    Join Date
    Aug 2007
    Location
    Memphis TN.
    Posts
    4,311

    Default Re: Is It Wood Or Cement?

    Quote Originally Posted by Scott Patterson View Post

    LP, GP, Celotex, Weyerhaeuser, Masonite all made siding products at one time. When I toured one of the LP plants they called it MDF. Most had class action lawsuits back in the 1990's early 2000 on their poop performance.
    .
    Yep,

    Lot of Crappie Siding out there.
    * usually swollen, degraded and in contact with the roof.
    .

    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    It Might have Choked Artie But it ain't gone'a choke Stymie! Our Gang " The Pooch " (1932)
    Billy J. Stephens HI Service Memphis TN.

  17. #17
    Join Date
    Oct 2011
    Location
    Minneapolis, MN
    Posts
    780

    Default Re: Is It Wood Or Cement?

    This is a good page about how different types of hardboard are made. It also mentions MDF (emphasis not mine):

    "A recent development in the board field eliminates humidification by delivering a board from the hot press at 4 - 6% moisture. This product, medium density fiberboard (MDF) utilizes the dry process and synthetic resin to hold the board together because press temperatures are not high enough to reactivate the lignin. MDF is most economical in the production of thick boards, 1/2and up, but thicknesses and densities overlap the hardboards.

    MEDIUM DENSITY FIBERBOARD (MDF) may be considered the same as hardboard, even though it does not conform to the technical definition. For many uses they are equally suitable."



    Do not think of knocking out another person's brains because he differs in opinion from you. It would be as rational to knock yourself on the head because you differ from yourself ten years ago.
    - James Burgh, 1754.

  18. #18
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Is It Wood Or Cement?

    Quote Originally Posted by Kristi Silber View Post
    This is a good page about how different types of hardboard are made. It also mentions MDF (emphasis not mine):

    "A recent development in the board field eliminates humidification by delivering a board from the hot press at 4 - 6% moisture. This product, medium density fiberboard (MDF) utilizes the dry process and synthetic resin to hold the board together because press temperatures are not high enough to reactivate the lignin. MDF is most economical in the production of thick boards, 1/2and up, but thicknesses and densities overlap the hardboards.

    MEDIUM DENSITY FIBERBOARD (MDF) may be considered the same as hardboard, even though it does not conform to the technical definition. For many uses they are equally suitable."

    Kristi,

    In reading the material from that link, your post makes that last part seem as though it was intentionally "out of context" with the other information in that link, although I know that was not your intent. Reading what you posted and what the entire article says, one would likely get a completely different opinion of what that last part says - it is more than just a "technical definition" difference between "hardboard" and MDF".

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  19. #19
    Join Date
    Oct 2011
    Location
    Minneapolis, MN
    Posts
    780

    Default Re: Is It Wood Or Cement?

    Well, it's true it was out of context, but my intention wasn't to make it so. There wasn't much context for it in the article, it was was more of an aside. What I was trying to communicate through the quote was that although MDF may show some characteristics of hardboard, it's technically a different thing. Sorry if the quote provided was misleading.

    Do not think of knocking out another person's brains because he differs in opinion from you. It would be as rational to knock yourself on the head because you differ from yourself ten years ago.
    - James Burgh, 1754.

  20. #20
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Is It Wood Or Cement?

    Quote Originally Posted by Kristi Silber View Post
    What I was trying to communicate through the quote was that although MDF may show some characteristics of hardboard, it's technically a different thing.
    That's a good way to say it, except that I would place less emphasis on the "technically" word part.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  21. #21
    Join Date
    Oct 2011
    Location
    Minneapolis, MN
    Posts
    780

    Default Re: Is It Wood Or Cement?

    Quote Originally Posted by Jerry Peck View Post
    That's a good way to say it, except that I would place less emphasis on the "technically" word part.
    I can't really place less emphasis on it unless I omit the word altogether...perhaps I should have, but didn't think it necessary. I've been saying since post #9 that MDF and hardboard are different products.

    Do not think of knocking out another person's brains because he differs in opinion from you. It would be as rational to knock yourself on the head because you differ from yourself ten years ago.
    - James Burgh, 1754.

  22. #22
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Is It Wood Or Cement?

    Quote Originally Posted by Kristi Silber View Post
    I can't really place less emphasis on it unless I omit the word altogether...
    Yep.

    I've been saying since post #9 that MDF and hardboard are different products.
    Yep, but that one post kinda muddied the water some on it.

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  23. #23
    Join Date
    Oct 2011
    Location
    Minneapolis, MN
    Posts
    780

    Default Re: Is It Wood Or Cement?

    Yes, I suppose that's right. I was coming at it from a very literal perspective, and focusing on the "technically," because that's what I was interested in. They are technically not the same. I can see how others might interpret it to mean, they're so close, we might as well call MDF a type of hardboard - but only if they don't read the quote carefully. Anyways, it was s'pose to be a little tidbit to lure people to look at the link, 'cuz it's quite informative about hardboard.

    Do not think of knocking out another person's brains because he differs in opinion from you. It would be as rational to knock yourself on the head because you differ from yourself ten years ago.
    - James Burgh, 1754.

  24. #24
    Join Date
    Oct 2010
    Location
    Tolland, CT
    Posts
    33

    Default Re: Is It Wood Or Cement?

    Quote Originally Posted by Scott Patterson View Post
    I wear a wedding ring, I have found that if I tap the siding with the ring on my finger that it has a sharp sound with fiber cement board and a dull thud with MDF.
    I knew there was a reason for getting married


  25. #25
    Join Date
    Mar 2007
    Location
    Fuquay Varina, NC
    Posts
    1,074

    Default Re: Is It Wood Or Cement?

    Seems most listings that are incorrect here is for OSB siding. It has wood grain finish and looks just like Masonite (hardboard) or cement fiber. That siding is also crap.

    Mike Schulz License 393
    Affordable Home Inspections
    www.houseinspections.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •