Results 1 to 8 of 8
Thread: Disposal outlet
-
08-27-2007, 05:46 PM #1
Member
- Join Date
- Mar 2007
- Location
- Knoxville, TN
- Posts
- 2,560
Disposal outlet
Outlet under sink for disposal. Was a tad loose and didn't work right either.
Similar Threads:
-
09-27-2007, 07:10 AM #2
Shannon Guinn Guest Re: Disposal outlet
It appears like this may have been the work of a DIY'er, or a hack. I would hate to think that a reputable EC would have done something like this.
-
09-27-2007, 02:45 PM #3
Member
- Join Date
- Mar 2007
- Location
- Colorado Springs, CO
- Posts
- 1,217
Re: Disposal outlet
Jack,
You're getting picky lately, aren't you? You expect the outlet to not be loose AND work right?
"Baseball is like church. Many attend but few understand." Leo Durocher
Bruce Breedlove
www.avaloninspection.com
-
09-27-2007, 04:14 PM #4
Member
- Join Date
- Mar 2007
- Location
- Fletcher, NC
- Posts
- 28,047
Re: Disposal outlet
And Shannon, a county electrical inspector, expects it to have a box!
At least it's grounded.
-
09-27-2007, 08:13 PM #5
Nolan Kienitz Guest Re: Disposal outlet
Originally Posted by Jerry Peck
... At least it's grounded.
This end of the wire is anyway.
-
09-28-2007, 05:16 AM #6
Michael Greenwalt Guest Re: Disposal outlet
But you overlooked the good points: Adjustable, accessible, mobile, easily inspectible. Geez, some inspectors are never satisfied
-
09-28-2007, 05:42 AM #7
William Brady Guest Re: Disposal outlet
the major defect in this picture is NO STEEL WOOL IN THE HOLE TO PREVENT THE MICE FROM COMING IN!!!!!!!!!!!!!!!
-
09-28-2007, 07:25 AM #8
Member
- Join Date
- Mar 2007
- Location
- Chicago, IL
- Posts
- 2,797
Re: Disposal outlet
Also, looks like it might be 12 AWG into the backstabs...
... and whoever installed that fastener pushing through for the other side might have received a BIG surprise.
Reply With Quote
Bookmarks